Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 121 for “"Melt-processing"”.

  1. Polymer-organoclay nanocomposites by melt processing

    … and several organoclays were prepared by melt processing. A detailed characterization of the thermal degradation of several commercial and experimental organoclays often used to form polymer nanocomposites was reported. The surfactant type, loading, and purification level of organoclay …

    texas Repository record for Polymer-organoclay nanocomposites by melt processing (opens in a new tab)

  2. Microporous polymeric membranes via melt processing

    … from immiscible polymer blends were produced via melt processing and post-extrusion treatments. Polystyrene (PS)/polypropylene (PP) and poly(ethylene terephthalate) (PET)/polypropylene (PP) blend systems with different rheological properties were studied. The blends were first compounded in an …

    njit Repository record for Microporous polymeric membranes via melt processing (opens in a new tab)

  3. Polyamide-layered silicate nanocomposites by melt processing

    … exposure of organoclay surfaces during processing can cause considerable polymer degradation and color formation depending upon the type of nylon-6 used and the surfactant structure in the organoclay.

    texas Repository record for Polyamide-layered silicate nanocomposites by melt processing (opens in a new tab)

  4. Polymer-layered silicate nanocomposites by melt processing

    … in improved levels of exfoliation. Finally, the melt processing conditions were fine tuned to generate optimum amounts of shear, and reduce thermal degradation of the surfactant during the preparation of nanocomposites. Once sufficient levels of organoclay exfoliation were attained, these …

    texas Repository record for Polymer-layered silicate nanocomposites by melt processing (opens in a new tab)

  5. Melt processing of biodegradable cellulose nanocomposites films

    … replacing oil-based not biodegradable plastics, melt processing of different biodegradable composites with internal mixer, single screw extruder or twin screw extruder has been carried out to investigate their processability. Different types of lignocellulosic materials in biodegradable …

    chalmers Repository record for Melt processing of biodegradable cellulose nanocomposites films (opens in a new tab)

  6. Melt processing of Thallium-based high Tc superconductors

    Includes bibliographical references.

    colo-mines Repository record for Melt processing of Thallium-based high Tc superconductors (opens in a new tab)

  7. Melt Processing of Metastable Acrylic Copolymer Carbon Precursors

    … of engineering technologies that facilitate melt spinning of carbon fiber precursors in both an environmentally sound and cost effective manner. More specifically, methods were developed to avoid a degradative process in acrylonitrile copolymers (typically used in textiles and as carbon fiber …

    vt Repository record for Melt Processing of Metastable Acrylic Copolymer Carbon Precursors (opens in a new tab)

  8. Oxidation and stabilisation chemistry of metallocene-based polyolefins during melt processing

    … of the oxidation mechanism of m-LLDPE during melt processing in order to develop more effective stabilisation systems and continue to increase the performance of the material. The primary objectives of this work were, firstly, to investigate the oxidative degradation mechanisms of m-LLDPE …

    aston Download PDF for Oxidation and stabilisation chemistry of metallocene-based polyolefins during melt processing (opens in a new tab)

  9. Melt Processing Thermally Unstable and High Molecular Weight Polymers with Supercritical Carbon Dioxide

    … concerned with the development of a continuous melt extrusion process utilizing CO₂ for the production of materials that cannot be typically melt processed. The first goal of this study is to determine under what conditions it is possible to use CO₂ to plasticize and, thereby, reduce the …

    vt Repository record for Melt Processing Thermally Unstable and High Molecular Weight Polymers with Supercritical Carbon Dioxide (opens in a new tab)

  10. Rheological Considerations for Dual-Extrusion Melt Processing of Dissimilar Polymers in Composite Structures

    … used to overcome a wide gap between the maximum processing temperature of the UHMW resin and the minimum processing temperature of the substrate resin and to avoid the high melt viscosity of the UHMW resin, but requires the costly recovery of toxic solvents. The UHMW resin is used because it …

    vt Repository record for Rheological Considerations for Dual-Extrusion Melt Processing of Dissimilar Polymers in Composite Structures (opens in a new tab)

  11. Advanced Thermoplastic Nanocomposite Melt Processing Using an Improved Supercritical Carbon Dioxide Pretreatment for the Nanomaterial

    … use of supercritical carbon dioxide (scCO2) with melt compounding have been investigated to overcome these issues. The focus of this work is on developing the scCO2 treatment of nanomaterial for thermoplastic nanocomposite generation. First, the supercritical carbon dioxide aided melt blending …

    vt Repository record for Advanced Thermoplastic Nanocomposite Melt Processing Using an Improved Supercritical Carbon Dioxide Pretreatment for the Nanomaterial (opens in a new tab)

  12. Flame Retardant System for Acrylonitrile-Butadiene-Styrene (ABS) Polymer Blended with Montmorillonite Clay via Melt Processing

    … dispersion of the inorganic filler in the melt. (HE)2MT and/or M2(HT)2-125-modified clay (bishydroxyethyl and dimethyl dihydrogenated tallow quaternary ammonium ions respectively) showed improvement of fire retardancy to an ABS system, lowering the peak heat release rate (PHRR). This …

    texas-state Repository record for Flame Retardant System for Acrylonitrile-Butadiene-Styrene (ABS) Polymer Blended with Montmorillonite Clay via Melt Processing (opens in a new tab)

  13. A novel approach for color and degradation control in poly(ethylene terephthalate) (PET) during melt processing

    … of the most critical problems that occur during melt processing of the polymer and reprocessing by recycling. This phenomenon adversely affects the properties and the end use of the final product making it only suitable for low grade materials. Although the degradations of PET have been …

    adelaide Repository record for A novel approach for color and degradation control in poly(ethylene terephthalate) (PET) during melt processing (opens in a new tab)

  14. Extrusion-based melt processing of (AB)n segmented poly(urea-siloxane)s and their modification towards amphiphilic hydrogels

    … Verfahren eingesetzt. Unter Verwendung vonmelt electrowriting(MEW) wurden einheitliche Faserdurchmesser kleiner20μm realisiert. PräziseAblageund hohe Stapelung bis zu einer Höhe von 50 Schichten wurden erzielt. Dieses Copolymer ist ein ausgezeichneterKandidat für MEW und übertrifft in …

    bayreuth Repository record for Extrusion-based melt processing of (AB)n segmented poly(urea-siloxane)s and their modification towards amphiphilic hydrogels (opens in a new tab)

  15. Microstructure development in solid state processing of polypropylene-talc composites and melt processing of high molecular weight HDPE-clay nanocomposites

    … to that of neat PP drawn under similar processing conditions. For a given die geometry, the final draw ratio of both of the die drawn materials increased with draw rate, and plateaued at higher draw rates. The ratio of final void fraction to particle fraction in the case of die drawn …

    msu Repository record for Microstructure development in solid state processing of polypropylene-talc composites and melt processing of high molecular weight HDPE-clay nanocomposites (opens in a new tab)

  16. Copolymerizing Acrylonitrile and Methyl Acrylate by RAFT for Melt Processing Applications: A Synthetic Investigation of the Effects of Chain Transfer Agent, Initiator, Temperature, and Solvent

    Statistical copolymers of acrylonitrile (AN) and methyl acrylate (MA) were successfully prepared and characterized using reversible addition-fragmentation chain transfer (RAFT) copolymerization. A typical copolymer was charged with 15 wt. % MA content. This thesis describes a systematic variation …

    vt Repository record for Copolymerizing Acrylonitrile and Methyl Acrylate by RAFT for Melt Processing Applications: A Synthetic Investigation of the Effects of Chain Transfer Agent, Initiator, Temperature, and Solvent (opens in a new tab)

  17. Sulfonated polysulfone desalination membranes by melt extrusion

    … sulfonated polysulfone desalination membranes by melt processing. One route to melt processing of high glass transition temperature polyelectrolytes, such as disulfonated poly(arylene ether sulfone) (BPS), involves mixing a plasticizer with the polymer. In this study, poly(ethylene glycol) (PEG) …

    texas Repository record for Sulfonated polysulfone desalination membranes by melt extrusion (opens in a new tab)

  18. Solvent-free solid-state materials for lithium ion batteries based on (AB)n segmented copolymers

    … solid-state lithium ion batteries. To ensure melt-processing, the electrolyte material needs to feature low viscosities at elevated temperatures while transferring in an elastomeric state at temperatures below 80 °C, a typical maximum operating temperature for commercial lithium ion batteries. …

    bayreuth Repository record for Solvent-free solid-state materials for lithium ion batteries based on (AB)n segmented copolymers (opens in a new tab)

Page 1 of 7