Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 14 of 14 for “"Membrane electrolyte"”.
-
Experimental and analytical study of an open cathode polymer electrolyte membrane fuel cell.
… was experimentally tested using two different membrane electrolyte assemblies; one high performance and the other high durability. The polarization curve resulting from simulation compares well with the polarization curve produced by experimental work. A 16 cell fuel cell stack was simulated …
-
Investigation of Novel Electrolytes for Use in Lithium-Ion Batteries and Direct Methanol Fuel Cells
… materials must be developed. In this work, novel electrolytes for secondary batteries and fuel cells have been studied using nuclear magnetic resonance and high pressure x-ray scattering techniques to form a better understanding of dynamic and structural properties of these materials. Ionic …
-
Synthesis of Two Monomers for Proton Exchange Membrane Fuel Cells (PEMFCs)
… two different monomers for proton exchange membrane (PEM) Fuel Cells. Such monomers are proposed to be polymerized to improve the efficiency and compatibility of electrodes and electrolytes in PEM fuel cells. The first target is to synthesize 4-diazonium-3-fluoro PFSI zwitterionic monomer. …
-
Ab-Initio Modeling of Degradation Mechanisms in Redox-Flow and Solid-State Batteries
… at the materials interfaces such as electrode/ electrolyte and membrane/electrolyte. Our current atomistic understanding of how chemical reaction dynamics at these interfaces affects capacity fading and the overall battery performance is still limited. The overarching goal of this research …
-
Dynamic modeling and analysis of proton exchange membrane fuel cells for control design
… issues facing the advancement of Proton Exchange Membrane (PEM) fuel cell technology by improving control-oriented modeling strategies for these systems. Real-time control is a major ongoing challenge for PEM fuel cell technologies, particularly with regards to water and temperature dynamics. This …
-
Design, Development, and Operation of an Electrochemical Urea Removal Reactor for the Application of Portable Dialysis
… carbon cloth cathode, and an alkaline exchange membrane electrolyte. The URC achieves urea removal rates of about 35 mg/cm2/day from an anolyte feed of 10 mM urea in 0.1 M KHCO3 operating at a pH of 7.4, a temperature of 37 °C, a flowrate of 20 ml/min, and a cell voltage of 1.9 V. The addition …
-
Modeling chemical degradation and proton transport in perfluorosulfonic acid ionomers
<p>The ionomer-membrane interface in a membrane electrode assembly connects the catalyst and membrane and allows hydrated protons to move between the catalyst and membrane. The continuous operation of the polymer membrane electrolyte fuel cell at high temperature and/or in frequent freeze/thaw …
-
An electrochemical sensor based on screen-printed electrodes for in-situ nitrate measurement in soil-extracted matrices
… electrode was modified with a nitrate-selective membrane incorporating nitrate-responsive active sites and high-surface-area conductive nanomaterials to facilitate nitrate recognition and impedance-based signal generation. To address membrane instability and signal drift in ion-selective …
-
NITROGEN DOPED CARBON CATALYSTS FOR ELECTROCHEMICAL OXYGEN REDUCTION REACTION
… dependent on petroleum derived fuels. Polymer electrolyte membrane (PEM) fuel cells are clean and attractive power generators for transportation and mobile applications due to their high energy conversion efficiency, low operating temperature and low environmental impact. However their …
-
Experimental and Modelling Studies of Cold Start Processes in Proton Exchange Membrane Fuel Cells
Proton exchange membrane fuel cell (PEMFC) has been considered as one of the most promising energy conversion devices for the future in automotive applications. One of the major technical challenges for the commercialization of PEMFC is the effective start-up from subzero temperatures, often …
-
Characterization of polymeric membranes: sulfonated polysulfones
… for use as a reverse osmosis desalination membrane. In this work, an extensive of dense membranes made from sulfonated polysulfone having 0.2, 0.4, 0.5, 0.6, 0.8, and 1.0 degree of sulfonation is described. The degree of sulfonation (D.S.) was maintained during the membrane fabrication …
-
Effect Of Various Ceramic Precursors On The Mechanical, Thermal, And Electrochemical Properties Of Polymer/Ceramic Nanofiber Separators For Lithium Ion Batteries
… have been incorporated ceramics into porous membrane separators as a way to improve their mechanical, thermal and battery performances. However, the inclusion of preformed ceramics within the polymer membrane can require multiple additional steps. Current methods of ceramic particle inclusion …
-
Μελέτη και χαρακτηρισμός ηλεκτρολυτικών υλικών για χρήση σε ηλεκτροχημικά στοιχεία καυσίμου τύπου χαμηλής θερμοκρασίας με απευθείας τροφοδοσία αιθανόλης
… to properties of the electrolytic polymer membrane: fuel which is fed to the anode compartment moves through the membrane towards the cathode compartment leading to a lower fuel utilization factor. At the same time, this quantity of fuel is oxidized on the cathode catalyst. This results in …
-
Membrane degradation studies in PEMFCs
… for PEMFC is stability and durability of the membrane separator. In this dissertation, we applied both experimental and modeling methods to investigate the chemical durability of PFSA membranes for fuel-cell applications. Degradation data were collected after Fenton's tests and the membrane …