Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 49 for “"Mesh Convergence"”.

  1. Verification and Validation Study of OpenFOAM on the Generic Prismatic Planing Hull Form

    … to fully planing regimes. Firstly, the mesh convergence study and Verification and Validation (V&V) study are performed on the basis of fixed attitude simulations. Three grids are chosen and used to perform the free attitude simulations at the highest speed. Then, mesh convergence study …

    vt Repository record for Verification and Validation Study of OpenFOAM on the Generic Prismatic Planing Hull Form (opens in a new tab)

  2. Investigation of Solution Verification and Validation of Nuclear Thermal Hydraulics Computational Fluid Dynamics Using Twin Rectangular Turbulent Jets

    … pursued without restrictive methods such as Grid Convergence Index and its variants. It is not meant to be a rigorous means of developing error bands (uncertainty bands) for realistic computational fluid dynamics analysis (including 3-D effects such as turbulence) though there is an attempt to do …

    tamu Repository record for Investigation of Solution Verification and Validation of Nuclear Thermal Hydraulics Computational Fluid Dynamics Using Twin Rectangular Turbulent Jets (opens in a new tab)

  3. Simulation of an Oxidizer-Cooled Hybrid Rocket Throat: Methodology Validation for Design of a Cooled Aerospike Nozzle

    … the Manson-Halford fatigue life criteria. A mesh convergence study was performed to establish solution mesh independence. This model was expanded by adding the remainder of the parts of the nozzle aft of the rocket motor so as to attempt to match the transient nature of the experimental data. …

    calpoly Repository record for Simulation of an Oxidizer-Cooled Hybrid Rocket Throat: Methodology Validation for Design of a Cooled Aerospike Nozzle (opens in a new tab)

  4. Automation of Antenna Isolation Modeling

    … with mathematical error metrics for evaluating mesh convergence and simulation reliability. This work extends the framework with advanced performance evaluation and additional comparative analysis capabilities. Key contributions include the development of simulation performance evaluation tools …

    chalmers Repository record for Automation of Antenna Isolation Modeling (opens in a new tab)

  5. Simulating the Electron Optics of an Electron Beam Manufacturing 3D Printer

    … further development, especially regarding mesh convergence, before the software can be implemented as a simulation tool at GE Additive.

    chalmers Repository record for Simulating the Electron Optics of an Electron Beam Manufacturing 3D Printer (opens in a new tab)

  6. Estimativa da temperatura do cérebro isquêmico através do método do filtro de partículas

    … problem was made through the analysis of the mesh convergence and through an energy balance. The solution of the state estimation problem was obtained with the sampling importance resampling algorithm, SIR, of the particle filter method. Noninvasive synthetic temperature measurements, at three …

    brazil-uerj Repository record for Estimativa da temperatura do cérebro isquêmico através do método do filtro de partículas (opens in a new tab)

  7. Finite Element Study of Plane Wave Acoustic Phenomena in Ducts

    … finite element factors such as shape functions, mesh refinement, and element distortion. The study concluded that the higher order shape function eight-node quadrilateral element gave considerably better results than lower order shape function four-node quadrilateral element. The eight-node …

    vt Repository record for Finite Element Study of Plane Wave Acoustic Phenomena in Ducts (opens in a new tab)

  8. Optimization of Fan Blade Design Using CFD and Reinforcement Learning

    … were performed using the k − ω SST solver, and a mesh convergence study was performed. The RL framework for blade optimization was based on the Deep Q-Network (DQN) algorithm, implemented in Python using Pytorch. The CFD Model validation was carried out by comparing the performance curve obtained …

    chalmers Repository record for Optimization of Fan Blade Design Using CFD and Reinforcement Learning (opens in a new tab)

  9. Refinement and Development of the Finite Volume Discrete Boltzmann Method in 2-D and 3-D

    … developed FVDBM solution on a cell-centered mesh is further studied and validated. The definition of a previously used stencil method is properly provided, and two unique stencils are developed and tested. From this study across flux schemes, simulated problems, and mesh resolutions, …

    rice Repository record for Refinement and Development of the Finite Volume Discrete Boltzmann Method in 2-D and 3-D (opens in a new tab)

  10. Stochastic dynamic analysis of floating solar structures

    … conducted at Queen’s University Belfast. Mesh convergence tests identified Refinement Level 3 as optimal, achieving RMSE as low as 1.02 × 10⁻⁴. The numerical model accurately replicated wave elevations with RMS errors of 0.82% for moderate waves, increasing to 7.36% for steeper waves. …

    qu-belfast Repository record for Stochastic dynamic analysis of floating solar structures (opens in a new tab) Download PDF for Stochastic dynamic analysis of floating solar structures (opens in a new tab)

  11. Behavior of reinforced concrete column-beam joint subjected to close in blast loads with polyurea and FRP sheets

    … of 400 MPa. Parametric analyses examined mesh-density sensitivity, explosive charge weight, blast-mitigation performance of various coatings like Poly urea and FRP Sheets. Numerical models were first validated against experimental contact-explosion tests on RC bridge columns (Yuan et al., …

    umkc Repository record for Behavior of reinforced concrete column-beam joint subjected to close in blast loads with polyurea and FRP sheets (opens in a new tab)

  12. Modeling flexural failure in composites using ANSYS ACP

    … FEA, such as verification, validation, and mesh convergence studies. The second major section focuses on my research work in the strength prediction of composite materials. Through using ANSYS ACP and ANSYS Mechanical, I develop finite element models that simulate ASTM D7264, a testing …

    texas Repository record for Modeling flexural failure in composites using ANSYS ACP (opens in a new tab)

  13. Computational hemodynamics: Hemolysis and viscoelasticity

    … agreement is found for the drag predictions. Mesh convergence is demonstrated for the new methods. Finally, a new tensor-based blood-damage model is proposed; the model is based on the analogy between red blood cells and fluid droplets. The model is compared with the traditional method of …

    rice Repository record for Computational hemodynamics: Hemolysis and viscoelasticity (opens in a new tab)

  14. Genetic Algorithm Based Optimization of Baffle Positions in a Forward Osmosis Draw Channel

    … using similar simulation conditions. Mesh convergence and OpenFOAM flow-variable solver studies are then conducted to minimize solution inaccuracy and computation time. Finally, a genetic algorithm is implemented via the open source optimization toolkit DAKOTA which allows optimized …

    wustl Repository record for Genetic Algorithm Based Optimization of Baffle Positions in a Forward Osmosis Draw Channel (opens in a new tab)

  15. Simulation of Crack Pattern on Borosilicate Glass Cylinder on Pellet Impact

    … factors affecting the crack pattern which are mesh pattern, mesh size and maximum principal strain-based failure criteria. Mesh pattern governs the style in which the crack propagates whereas the mesh size decides how well defined and wide the cracks will be and the strain-based failure …

    mtu Repository record for Simulation of Crack Pattern on Borosilicate Glass Cylinder on Pellet Impact (opens in a new tab)

  16. Numerical Analysis of Re-Entry Vehicle Landing on Soft Terrain

    … Finite Element Analysis to model the sand, a mesh convergence study was used to find the optimal mesh size for simulation runs. Material models, element formulations, part contacts, and simulation parameters were defined in a Finite Element solver to numerically solve the simulation. These …

    buffalo Repository record for Numerical Analysis of Re-Entry Vehicle Landing on Soft Terrain (opens in a new tab)

  17. Fatigue Strength of Bridge Girders with Corrugated Web

    … behaviour of the experimental girders, a mesh convergence and validation study have been performed separately on each of the specimens. The FE modelling has been described and further results derived. Based on the results of the numerical analysis the nominal-, structural hot-spot- and …

    chalmers Repository record for Fatigue Strength of Bridge Girders with Corrugated Web (opens in a new tab)

  18. Compression After Impact Experiments and Analysis on Honeycomb Core Sandwich Panels with Thin Facesheets

    … each damage detail on overall analysis results. Mesh convergence of the new FEM is also discussed. Analysis results are compared to the experimental results for each of the 32 CAI sandwich panel specimens tested to failure. The failure of each specimen is accurately predicted in a high-fidelity, …

    vt Repository record for Compression After Impact Experiments and Analysis on Honeycomb Core Sandwich Panels with Thin Facesheets (opens in a new tab)

  19. Finite element methods for viscoelastic fluid flow simulations: Formulations and applications

    … using linear interpolation functions. The mesh-convergence of GLS4 is comparable to the state-of-the-art DEVSS-TG/SUPG method and yields accurate results at lower computational cost. The log-conformation formulation, which alleviates the long-standing high Weissenberg number problem …

    rice Repository record for Finite element methods for viscoelastic fluid flow simulations: Formulations and applications (opens in a new tab)

  20. Alterations in lumbar spine mechanics due to degenerative disc disease

    … based on computed tomography (CT) imagery. Mesh convergence was verified based on strain energy density predictions. Kinematic and mechanical predictions of clinical interest, including range of motion and intradiscal nuclear pressure, were validated under pure moment loading. The mechanical …

    colostate Repository record for Alterations in lumbar spine mechanics due to degenerative disc disease (opens in a new tab)

Page 1 of 3