Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 47 for “"Metal Building"”.

  1. Metal building systems.

    During the last two decades, metal building systems have become an important part of the building construction industry. Today, almost 50% of the low-rise non-residential buildings under 150,000 square feet constructed in the United States, are metal building systems. Low-rise non-residential …

    nps Repository record for Metal building systems. (opens in a new tab)

  2. Flange bracing requirements for metal building systems

    … for complex frame geometries typically found in metal buildings can prove to be an arduous task given current methods. The American Institute of Steel Construction's Appendix 6 from the 2010 Specification for Structural Steel Buildings affords engineers a means for determining brace strength and …

    gatech Repository record for Flange bracing requirements for metal building systems (opens in a new tab)

  3. Flange stability bracing behavior in metal building frame systems

    … and strength demands on flange braces in metal building systems. This objective is accomplished by a targeted study of the effects of various attributes of metal building systems not fully addressed in existing bracing design procedures. Special emphasis is placed on attributes such as …

    gatech Repository record for Flange stability bracing behavior in metal building frame systems (opens in a new tab)

  4. Assessment of pre-engineered metal building damage in hurricane winds

    … of the major threats to the serviceability of buildings during their designed life cycle. Post-disaster damage documentation has proved that windstorms have destroyed multiple residential and commercial facilities alike. The focus of this thesis is to determine whether the damages to metal …

    ttu Repository record for Assessment of pre-engineered metal building damage in hurricane winds (opens in a new tab)

  5. Toward improved flange bracing requirements for metal building frame systems

    … placed on out-of-plane flange bracing design in metal building frame systems. Potential improvements and extensions to the 2005 AISC Appendix 6 stability bracing provisions are studied and evaluated. The structural attributes considered include various general conditions encountered in practical …

    gatech Repository record for Toward improved flange bracing requirements for metal building frame systems (opens in a new tab)

  6. LRFD evaluation of full-scale metal building rigid frame tests

    Metal building companies commonly use rigid frames to meet the requirement of large, open spaces which are unobstructed by interior columns. These rigid frames are optimally designed and constructed using tapered columns and rafters, connected at the knees and ridge by moment end-plate connections. …

    vt Repository record for LRFD evaluation of full-scale metal building rigid frame tests (opens in a new tab)

  7. Metal building construction using the MIC-240 ABM K-Span machine

    The process of constructing a metal system has always been fairly similar to construct. Although there are many companies that produce, manufacture, and construct metal buildings, the construction effort has been the same. The typical steps are to construct the foundation and floor slab, then erect …

    nps Repository record for Metal building construction using the MIC-240 ABM K-Span machine (opens in a new tab)

  8. Effective Lengths of Web-Tapered Columns in Rigid Metal Building Frames

    Current procedures for estimating effective length factors for web-tapered members rely heavily on the use of charts and graphs. This makes them difficult to implement using a computer. In addition, they are often based on unrealistic assumptions. In cases where these assumptions are not satisfied, …

    vt Repository record for Effective Lengths of Web-Tapered Columns in Rigid Metal Building Frames (opens in a new tab)

  9. Towards a Better Understanding of the Fundamental Period of Metal Building Systems

    Metal buildings account for over 40% of low-rise construction in the US. Despite this, predictive fundamental period equations that were obtained empirically for mid-rise construction are used in seismic design. Analytical modeling of metal building frames implied that these equations significantly …

    vt Repository record for Towards a Better Understanding of the Fundamental Period of Metal Building Systems (opens in a new tab)

  10. Development of Prediction Methods for the Lateral Anchorage Requirements in Metal Building Roof Systems

    Metal building roof systems with C- or Z-section purlins require restraint to resist lateral forces developed within the roof system under gravity loads. The currently available procedures for predicting these forces have been shown to be inaccurate for sloped roofs and difficult to apply to roof …

    vt Repository record for Development of Prediction Methods for the Lateral Anchorage Requirements in Metal Building Roof Systems (opens in a new tab)

  11. Strength and Ductility of Rod-Braced Diaphragms in Metal Building Systems Subjected to Earthquake Ground Motions

    Metal building systems are a common form of construction but the behavior of roof diaphragms in metal buildings that are subjected to earthquake ground motions is not entirely understood. In this study, the strength and ductility of rod-braced diaphragms with hillside washer connections or rod-pad …

    byu Repository record for Strength and Ductility of Rod-Braced Diaphragms in Metal Building Systems Subjected to Earthquake Ground Motions (opens in a new tab) Download PDF for Strength and Ductility of Rod-Braced Diaphragms in Metal Building Systems Subjected to Earthquake Ground Motions (opens in a new tab)

  12. Behavior and design of metal building frames using general prismatic and web-tapered steel I-section members

    Metal building frames are typically designed using welded prismatic and web-tapered members with doubly-symmetric and/or singly-symmetric cross sections. Until recently, the base U.S. provisions for design of frames with web-tapered members were provided in the AISC ASD (1989) and LRFD (1999) …

    gatech Repository record for Behavior and design of metal building frames using general prismatic and web-tapered steel I-section members (opens in a new tab)

  13. Direct Strength Method for the Flexural Design of Through-Fastened Metal Building Roof and Wall Systems under Wind Uplift or Suction

    The design of metal building roof and wall systems under uplift and suction wind loading is complicated because the laterally unbraced purlin and girt's free flange is compressed, and the cross-section rotates due to the shear flow. The objective of this thesis is to introduce a Direct Strength …

    vt Repository record for Direct Strength Method for the Flexural Design of Through-Fastened Metal Building Roof and Wall Systems under Wind Uplift or Suction (opens in a new tab)

  14. Assessment of Analytical Procedures for Designing Metal Buildings for Wind Drift Serviceability

    While designing metal buildings for wind drift, for simplicity of analysis and design, connection at base of column is considered as pinned which provides no rotational restraint. The actual behavior of the connection however, is partially rigid, that provides some rotational stiffness even in case …

    vt Repository record for Assessment of Analytical Procedures for Designing Metal Buildings for Wind Drift Serviceability (opens in a new tab)

  15. Dimensional coordination of industrialized metal buildings

    … be a tool which can help to organize different building components manufactured independently into an integrated whole, and to improve flexibility in the use of these products. Modular coordination is defined as the ultimate goal of dimensional coordination. A review of existing coordination …

    rice Repository record for Dimensional coordination of industrialized metal buildings (opens in a new tab)

  16. MOMENT-ROTATION BEHAVIOR OF BASE-PLATE CONNECTIONS IN LOW-RISE METAL BUILDINGS

    In designing low-rise metal building systems, column-base connections are commonly assumed to be pinned with no rotational stiffness for both serviceability and strength limit states; however, practical experience indicates that even base connections that are designed to be pinned have a …

    houston Repository record for MOMENT-ROTATION BEHAVIOR OF BASE-PLATE CONNECTIONS IN LOW-RISE METAL BUILDINGS (opens in a new tab)

  17. Structural Optimization using the Principle of Virtual Work and an Analytical Study on Metal Buildings

    … was then used to analyze the behavior of metal building frames under various loadings. The focus of this study was to determine the effect modeling the column base connection as partially rigid has on wind drift in metal building frames. Before beginning the study, a literature review was …

    vt Repository record for Structural Optimization using the Principle of Virtual Work and an Analytical Study on Metal Buildings (opens in a new tab)

Page 1 of 3