Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 19 of 19 for “"Metal Injection Molding"”.

  1. Study of rheological and sintering behavior of iron-based feedstock used in low-pressure metal injection molding

    … the possibility of producing low-cost petal injection molding (PIM) parts from irregular iron-based powders produced by Rio Tinto Metal Powders Company. Mainly water-atomized iron powders with different post-processing conditions (milling, sieving, and annealing), chemical compositions, and …

    ets-quebec Download PDF for Study of rheological and sintering behavior of iron-based feedstock used in low-pressure metal injection molding (opens in a new tab)

  2. Microstructural and Mechanical Properties of Co and Ti Alloys for Biomedical Applications produced by Metal Injection Molding (MIM)

    The present work was carried out in the frame of a scientific cooperation between the Department of Materials Engineering and Industrial Technologies of Trento University and MIMEST spa (Pergine Valsugana, Trento). The cooperation was established to develop the applications of MIM products in the …

    trento Repository record for Microstructural and Mechanical Properties of Co and Ti Alloys for Biomedical Applications produced by Metal Injection Molding (MIM) (opens in a new tab)

  3. The structure-property relationships of powder processed Fe-Al-Si alloys

    … by net shape PN processing techniques such as metal injection molding. The alloy compositions of iron-aluminum alloys have been optimized for room temperature ductility, but have limited high temperature strength. Hot extruded powder alloys in the Fe-Al-Si system have developed impressive …

    iastate Repository record for The structure-property relationships of powder processed Fe-Al-Si alloys (opens in a new tab)

  4. Reduction expansion synthesis for magnetic alloy powders

    … Expansion Synthesis (RES), a technique in which metal particles are the product of the rapid heating to approximately 800 degrees Celsius, in inert atmosphere, of physical mixtures of urea, or similar molecules, and metal oxide, hydroxide or nitrates. As shown by scanning electron microscopy and …

    nps Repository record for Reduction expansion synthesis for magnetic alloy powders (opens in a new tab)

  5. Produção de implantes de titânio, via moldagem por injeção de pós de hidretos de titânio

    … de Moldagem de Pós por Injeção ( MPI ), ou “Metal Injection Molding” ( MIM ) na língua inglesa. Para a produção dos componentes de titânio, utilizou-se de pós de hidreto de titânio produzidos pelo processo de Hidretação-Dehidretação ( HDH ), no Laboratório de Transformação Mecânica - UFRGS. …

    brazil-ufrgs Repository record for Produção de implantes de titânio, via moldagem por injeção de pós de hidretos de titânio (opens in a new tab)

  6. MICRO FEATURE ENHANCED SINTER BONDING OF METAL INJECTION MOLDED (MIM) PARTS TO A SOLID SUBSTRATE

    In metal injection molding (MIM), fine metal powders are mixed with a binder and injected into molds, similar to plastic injection molding. After molding, the binder is removed from the part, and the compact is sintered to almost full density. The obstacle to sinter bonding a MIM part to a …

    clemson Repository record for MICRO FEATURE ENHANCED SINTER BONDING OF METAL INJECTION MOLDED (MIM) PARTS TO A SOLID SUBSTRATE (opens in a new tab)

  7. Process-property-microstructure relationships in laser-powder bed fusion of 420 stainless steel.

    … additive manufacturing technique for fabricating metal components with complex design and customized features. However, only a limited number of materials have been widely studied using L-PBF. AISI 420 stainless steel, an alloy with a useful combination of high strength, hardness, and corrosion …

    louisville Repository record for Process-property-microstructure relationships in laser-powder bed fusion of 420 stainless steel. (opens in a new tab)

  8. Effect of Pad Design and Bracket Manufacturing Method on Bracket Bond Strength

    … and debonding characteristics between one-piece metal brackets made by metal injection molding (MIM) and multi-piece metal brackets made by machining then soldering/brazing with differing pad designs. Methods: A total of thirteen metal orthodontic brackets manufactured by 8 different companies …

    wvu Repository record for Effect of Pad Design and Bracket Manufacturing Method on Bracket Bond Strength (opens in a new tab)

  9. Development and evaluation of P/M processing techniques to improve and control the mechanical properties of metal injection molded parts

    "Metal Injection Molding (MIM) is one of the most rapidly growing areas of powder metallurgy (P/M) but the growth ofMIM into new markets and more demanding applications is limited by two fundamental barriers, the availability of low cost metal powders and a lack of knowledge and understanding of …

    must-thes Repository record for Development and evaluation of P/M processing techniques to improve and control the mechanical properties of metal injection molded parts (opens in a new tab)

  10. Desenvolvimento e análise da influência da oxinitrocarbonetação e acabamento intermediário nas propriedades metalúrgicas e mecânicas de aços inoxidáveis MIM

    … um grande desafio científico atual. O processo Metal Injection Molding (MIM) tem representado, nos últimos anos, uma grande alternativa para a produção de aços com estas características e elevada produtividade. Existe uma crescente demanda referente ao estudo e utilização de aços inoxidáveis MIM …

    brazil-ufrgs Repository record for Desenvolvimento e análise da influência da oxinitrocarbonetação e acabamento intermediário nas propriedades metalúrgicas e mecânicas de aços inoxidáveis MIM (opens in a new tab)

  11. Materials-processing relationships for metal fused filament fabrication of Ti-6Al-4V alloy.

    … tooling and small-scale part production. The metal AM of complex geometries is widely accepted and promoted in the industry. While several metal AM technologies exist and are matured to a level where expectation in terms of design and properties are possible to realize. But the metal AM …

    louisville Repository record for Materials-processing relationships for metal fused filament fabrication of Ti-6Al-4V alloy. (opens in a new tab)

  12. Development of a Process for Thermal and Mechanical Modelling of Screw-Driven Pellets Extrusion

    … The proposed extruder is designed for metal 3D printing. The device demonstrates great potential in tackling some of the major issues faced by the metal additive manufacturing community. It eliminates the use of metal powder for workplace and workers safety. It is able to produce …

    bucknell Repository record for Development of a Process for Thermal and Mechanical Modelling of Screw-Driven Pellets Extrusion (opens in a new tab)

  13. Influence of wax-based binder formulations on rheological properties of feedstocks used in low-pressure metal injection

    Low-pressure metal injection molding (LPIM) is a powerful technology used to produce small complex net shape metallic parts from a large variety of metals in a cost-effective way. The advantages of LPIM process include high production volumes, high buy-to-fly ratio, wide variety of materials (both …

    ets-quebec Download PDF for Influence of wax-based binder formulations on rheological properties of feedstocks used in low-pressure metal injection (opens in a new tab)

  14. Ferro puro moldado por injeção para aplicação em Stents biodegradáveis

    Na presente pesquisa, produziu-se amostras de ferro puro poroso como biomaterial degradável visando a aplicação em stents, pelo processo de moldagem por injeção de pós metálicos (MPI). Os efeitos da fração volumétrica de ferro puro na mistura de injeção e da temperatura de sinterização na …

    brazil-ufrgs Repository record for Ferro puro moldado por injeção para aplicação em Stents biodegradáveis (opens in a new tab)

  15. Desenvolvimento de ímãs de Nd-Fe-B pelo processo MPI- aplicados em máquinas elétricas (motores)

    … de fabricação de ímãs de terras raras – TR – é a metalurgia do pó convencional. Este processo inclui etapas de preparação da liga, moagem, compactação sob campo e sinterização. Atualmente, ímãs obtidos pelo processo de injeção tem como resultado os ímãs conhecidos como bonded, que são compósitos …

    brazil-ufrgs Repository record for Desenvolvimento de ímãs de Nd-Fe-B pelo processo MPI- aplicados em máquinas elétricas (motores) (opens in a new tab)

  16. Moldagem por injeção de aço inoxidável 316L utilizando ligante sustentável à base de borracha natural

    A Moldagem de Pós Metálicos por Injeção (MIM) constitui uma tecnologia consolidada para a fabricação de componentes metálicos de geometria complexa, elevada precisão dimensional e bom acabamento superficial. Nesse processo, o sistema ligante desempenha papel fundamental na moldagem, sendo …

    brazil-ufrgs Repository record for Moldagem por injeção de aço inoxidável 316L utilizando ligante sustentável à base de borracha natural (opens in a new tab)

  17. Variantní řešení výroby jezdce

    Projekt vypracovaný v rámci bakalářského studia oboru Strojní inženýrství předkládá návrh technologií použitelných při výrobě jezdce, který je součástí aretačního mechanismu vyráběného firmou TOKOZ a.s., a podává zhodnocení jejich vhodnosti. Zvažovanými technologiemi jsou odlévání, vstřikování …

    brno-tech Repository record for Variantní řešení výroby jezdce (opens in a new tab)