Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 23 for “"Metal Machining"”.

  1. Sustainable recycling of metal machining swarf via spark plasma sintering

    In general, extracting virgin metals from natural resources exerts a significant environmental and economic impact on our earth and society. Production of virgin stainless steels and titanium (Ti) alloys have particularly caused concerns because of the high demands of these two classes of metals …

    colostate Repository record for Sustainable recycling of metal machining swarf via spark plasma sintering (opens in a new tab)

  2. Assessment of metal machining process parameters and the development of adaptive control

    … and uncoated and coated carbide inserts when machining engineering steels with different carbon contents and microstructures. Particular attention has been paid to behavioural patterns with a near-eutectoid steel of variable microstructures. After cutting, the surface roughnesses of these …

    adelaide Repository record for Assessment of metal machining process parameters and the development of adaptive control (opens in a new tab)

  3. Thermodynamics of Transiently Pumped CO2 Gas Laser Plasmas

    … which restricts performance, especially in metal machining. Design requirements include: simplicity of construction, reliability, high efficiency, low operating voltage, uniformity of the output beam, and the ability to vary the output parameters over a wide range. A major aim of this …

    glasgow Download PDF for Thermodynamics of Transiently Pumped CO2 Gas Laser Plasmas (opens in a new tab)

  4. Quantitative methods for inferring process-structure-property relations in machining

    Metal machining subjects material to large strains (e > 1) at extremely high rates (rate > 1000 s-1) while simultaneously imposing heating due to dissipated plastic work. This complex thermomechanical loading drives microstructure evolution and consequently property evolution. Oxygen Free High …

    gatech Repository record for Quantitative methods for inferring process-structure-property relations in machining (opens in a new tab)

  5. Molecular Dynamics Simulations of Grain Boundaries in Cemented Carbides

    Cemented carbide is a tool material used in metal machining in industry. It is a composite material based on a mixture of a hard carbide phase and a more though metal binder phase. When used in cutting applications, the productivity is often limited by high temperature plastic deformation. A …

    chalmers Repository record for Molecular Dynamics Simulations of Grain Boundaries in Cemented Carbides (opens in a new tab)

  6. Feature Engineering and End-to-End Deep Learning in Tool Wear Monitoring

    … in the context of tool wear monitoring during metal machining. Feature engineering was used as a practical approach to predict when CNC machine tools were worn. A robust data-pipeline was developed, and multiple features and models were tested. The best model achieved a precision-recall …

    queens Repository record for Feature Engineering and End-to-End Deep Learning in Tool Wear Monitoring (opens in a new tab)

  7. Parametric Modeling Program of Fillet End Mill

    … cutter is the most commonly used cutting tool in metal machining industry, especially flat end-mill and fillet end-mill, which provide significant influence on machining efficiency and quality. Nickel-based high temperature alloy is widely used in aerospace industry due to its excellent …

    concordia Download PDF for Parametric Modeling Program of Fillet End Mill (opens in a new tab)

  8. Anaerobic treatment of a metalworking fluid and overcoming the toxic effects on the biodegradation process

    <p>Metalworking fluids (MWFs) are petroleum emulsions employed for metal machining processes as coolants and lubricants. To date, they have been irreplaceable in modern heavy and manufacturing industries, with annual usage exceeding two billion litres worldwide. However, the large amount of MWFs, …

    oxford Repository record for Anaerobic treatment of a metalworking fluid and overcoming the toxic effects on the biodegradation process (opens in a new tab)

  9. Hybrid technologies for remediation of recalcitrant industrial wastewater

    In metal machining processes, the regulation of heat generation and lubrication at the contact point are achieved by application of a fluid referred to as metalworking fluid (MWF). This has the combined features of the cooling properties of water and lubricity of oil. MWFs inevitably become …

    oxford Repository record for Hybrid technologies for remediation of recalcitrant industrial wastewater (opens in a new tab)

  10. Physical sectioning in 3D biological microscopy

    … in the sectioning process, drawn from the metal machining literature, are introduced and compared with observed measurements of chatter in the tissue cutting process. To understand the effects of the embedding polymer on tissue sectioning, we discuss methods to characterize the polymer …

    tamu Repository record for Physical sectioning in 3D biological microscopy (opens in a new tab)

  11. Novel waveguide filters in communication systems

    … computer numerically controlled (CNC) metal machining. This filter is used as a prototype to find the tolerance of commercial CNC milling machine. The sensitivity analysis and yield analysis are presented to help estimate the real production and improve the fabrication tolerance. …

    birmingham Download PDF for Novel waveguide filters in communication systems (opens in a new tab)

  12. Process modelling and adaptive control of a metal milling process

    … are milled entirely from single solid billets of metal. Current practice is to machine at conservative and constant feed-rates. This avoids damage to the workpiece and therefore reduces costly scrap. On-board monitoring systems on milling machines within the aerospace industry have introduced the …

    bristol Repository record for Process modelling and adaptive control of a metal milling process (opens in a new tab) Download PDF for Process modelling and adaptive control of a metal milling process (opens in a new tab)

  13. A unified constitutive material model with application to machining

    Finite element simulation of metal cutting processes offers a cost-effective method to optimize the cutting conditions and to select the right tool material and geometry. A key input to such simulations is a constitutive model that describes material behavior during severe plastic deformation. …

    gatech Repository record for A unified constitutive material model with application to machining (opens in a new tab)

  14. A FEATURE AND KNOWLEDGE-BASED OBJECT-ORIENTED PROCESS PLANNING METHODOLOGY FOR THE MANUFACTURE OF PROGRESSIVE DIE PLATES

    … formed, complex and interchangeable sheet metal components economically and rapidly. The degree of precision and complexity of the die components will vary considerably in relation to the dimensional tolerances of the sheet metal components. Many computer-aided design (CAD) and …

    nus Repository record for A FEATURE AND KNOWLEDGE-BASED OBJECT-ORIENTED PROCESS PLANNING METHODOLOGY FOR THE MANUFACTURE OF PROGRESSIVE DIE PLATES (opens in a new tab) Download file for A FEATURE AND KNOWLEDGE-BASED OBJECT-ORIENTED PROCESS PLANNING METHODOLOGY FOR THE MANUFACTURE OF PROGRESSIVE DIE PLATES (opens in a new tab)

  15. A study of tool wear in turning of pure aluminum and drilling of CFRP/titanium stacks

    … Although pure aluminum is a ductile metal while CFRP contains brittle carbon fibers, there exist also few important similarities which impact tool wear. For instance, neither work material contains inclusions harder than the tool material. Thus, in both cases, the abrasive wear …

    msu Repository record for A study of tool wear in turning of pure aluminum and drilling of CFRP/titanium stacks (opens in a new tab)

  16. LIGA cavity resonators and filters for microwave and millimetre-wave applications

    … been built with rectangular or cylindrical metallic waveguides, which typically have low loss, high quality (Q) factor, and higher power handling capability. However such waveguide cavity based circuits made by traditional metal machining techniques tend to be costly, particularly for …

    sask Repository record for LIGA cavity resonators and filters for microwave and millimetre-wave applications (opens in a new tab)

  17. Tool Wear Modeling for Application to Gear Shaping

    … productivity, economics, and sustainability of metal machining operations. While the topic of tool wear has been studied extensively for conventional metal cutting processes, like milling, turning, and drilling, there is a scarcity of studies in literature on modeling and predicting tool wear in …

    waterloo Repository record for Tool Wear Modeling for Application to Gear Shaping (opens in a new tab)

Page 1 of 2