Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 9 of 9 for “"Metal Modulated Epitaxy"”.
-
Investigation Of Metal Modulated Epitaxy Grown III-Nitride High-Power Electronic And Optoelectronic Devices
The wide-bandgap material GaN (Eg = 3.4 eV) continues to mature due to its achievements in high-power electronic and optoelectronic devices. The fully vertical GaN high-power devices show high performance but are very expensive. Quasi-vertical GaN devices are cost-effective but lack high …
-
Composition Dependence of Strain and Radiation Resistance in AlxGa(1-x)N Heterostructures
… films across a range of compositions grown by metal modulated epitaxy and disordered with 946 MeV swift heavy Au ions. Rutherford backscattering spectrometry in channeling configuration was used to disentangle strain arising from lattice mismatch at the film-substrate interface from the strain …
-
Structural characterization and understanding growth kinetics of modern III-nitride epitaxial methods
… in GaN, AlInN, AlGaN, and ScAlN grown via the Metal Modulated Epitaxy (MME) technique, a modern growth technique in the Molecular Beam Epitaxy (MBE) system, are explained in the present dissertation.
-
Overcoming Longstanding Synthesis Challenges Toward Realizing the Full Device Potential of III-Nitride Semiconductors
… material by traditional growth techniques like metalorganic chemical vapor deposition (MOCVD) and molecular beam epitaxy (MBE). Through control of growth kinetics, metal-modulated epitaxy (MME) has been shown to have success in growing III-nitrides, especially highly doped films and ternary …
-
Surface oxide removal on aluminum nitride substrates
… surfaces on AlN substrates for the purpose of epitaxy. The presence of surface oxides can cause stacking faults to form at the regrowth interface which leads to threading dislocations that propagate into the film. These defects can negatively affect the performance of any semiconductor devices …
-
Molecular beam epitaxy growth of indium nitride and indium gallium nitride materials for photovoltaic applications
… technology for material growth by molecular beam epitaxy (MBE) and fabrication of indium gallium nitride/gallium nitride (InxGa1-xN/GaN) heterojunction solar cells. InxGa1-xN solar cell have the potential to span 90% of the solar spectrum, however there has been no success with high indium (In) …
-
Improved understanding and control of Mg-doped GaN by plasma assisted molecular beam epitaxy
… which suggests preferential buildup of the metal bilayer before growth begins with an unfamiliar cation-anion exchange process initially upon metal shutter opening. Using the new RHEED growth and regime characterization technique, a new growth technique called metal modulated epitaxy (MME) …
-
Understanding the scandium catalytic effect for the improvement of MBE-grown low-temperature scandium aluminum nitride films
… ScAlN has been grown via sputtering,[4] metalorganic chemical vapor deposition (MOCVD),[5] and traditional molecular beam epitaxy (MBE),[6,7] but has seen recent improvements when grown metal-rich and at low temperatures using metal modulated epitaxy (MME), a specialized technique of MBE …
-
Addressing the fundamental obstacles of p-type doping, substrates, and defect densities in group III-nitrides grown by molecular beam epitaxy: Towards a III-nitride on silicon solar cell
… Using a modified form of molecular beam epitaxy (MBE) called metal-modulated epitaxy (MME), hole concentrations as high as 7.9x1019 cm-3 are achieved, nearly 20-40x the previous state of the art. Impurity band conduction, resulting from proper incorporation of Mg at concentrations >1020 …