Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 86 for “"Metal coating."”.

  1. Metal coating of optical fibres

    … thesis is concerned with the production of metal-coated optical fibres, the fibres being drawn within a vacuum. Most common methods for producing optical fibres employ an oxy-gas ring burner or an inert gas resistance furnace to reach the high temperatures necessary to melt silica. These …

    oxford Repository record for Metal coating of optical fibres (opens in a new tab)

  2. Industrial application of metal coating for improved corrosion resistance

    Gradual degradation of metal surfaces also known as corrosion is a well-known phenomenon found in most industries. This destructing mechanism can lead to reduced utility and efficiency, or in the worst case, total failure of plants, equipment, and components which is extremely costly and also serve …

    chalmers Repository record for Industrial application of metal coating for improved corrosion resistance (opens in a new tab)

  3. Metal coating and embedding fibre optical sensors for industrial applications

    … development of two monitoring systems based on metal-coated Fibre Bragg Grating sensors, which are to be validated in two distinct industrial applications within harsh environments. One is intended for the naval sector as part of the NEXT-BEARINGS project, while the other is designed for the …

    city-london Download PDF for Metal coating and embedding fibre optical sensors for industrial applications (opens in a new tab)

  4. A novel nonelectrolytic process for chromium and nickel coating

    The use of hexavalent chromium in metal coating operations, as per electrolytic processing, is subject to increasingly restrictive regulations due to its carcinogenic and toxic properties. Yet, these coatings are critical for corrosion resistance in aircraft parts such as hydraulic systems. This …

    nps Repository record for A novel nonelectrolytic process for chromium and nickel coating (opens in a new tab)

  5. Improved System for Fabrication and Characterization of Nanophotonic Devices by Multi-photon Lithography

    … developed for non-destructively removing Au/Pd coatings that must be deposited onto structures to image them by scanning electron microscopy. The structural and optical integrity of the samples was found to be maintained despite etching. The sputter-coated sample sustained no structural damage …

    ucf Repository record for Improved System for Fabrication and Characterization of Nanophotonic Devices by Multi-photon Lithography (opens in a new tab)

  6. Carbon Nanotube (CNT) Metallic Composite with Focus on Processing and the Resultant Properties

    Metal-carbon nanotubes (CNTs) composites are the promising advanced materials that are being developed to take the advantage of the exceptional properties of CNTs. Because of the intrinsically strong in-plane atomic SP2 bonding CNTs offer high young's modulus (1.0–1.8 TPa), high tensile strength …

    ucf Repository record for Carbon Nanotube (CNT) Metallic Composite with Focus on Processing and the Resultant Properties (opens in a new tab)

  7. Investigation of peculiarities of electroless copper plating systems using hydroxycarboxylic acids as Cu(II) ligands /

    Electroless metal coating technique is one of the elegant ways of metal coating by controlling the temperature and pH of the plating bath in which there is no usage of electric current. The industrial electroless copper plating solution containing formaldehyde as reducing agent are known from the …

    vilnius Repository record for Investigation of peculiarities of electroless copper plating systems using hydroxycarboxylic acids as Cu(II) ligands / (opens in a new tab)

  8. Cheminio variavimo sistemų, Cu(II) ligandais naudojant hidroksikarboksirūgštis, ypatumų tyrimas /

    Electroless metal coating technique is one of the elegant ways of metal coating by controlling the temperature and pH of the plating bath in which there is no usage of electric current. The industrial electroless copper plating solution containing formaldehyde as reducing agent are known from the …

    vilnius Repository record for Cheminio variavimo sistemų, Cu(II) ligandais naudojant hidroksikarboksirūgštis, ypatumų tyrimas / (opens in a new tab)

  9. Investigation of a micromachined electric field mill to maximize the electrostatic field sensitivity

    … modifications are studied and put forward. Metal coating of the sensor surface could lead to a good electrical grounding that addresses the charging problem. Non-resonant working design was established with a shutter displacement around 5μm. Finite element simulations were set up to look …

    manitoba Repository record for Investigation of a micromachined electric field mill to maximize the electrostatic field sensitivity (opens in a new tab)

  10. Applications of optical fiber sensors with thick metal coatings

    … fiber optic sensor design which employs a thick metal coating to retain information regarding the strain history of a sensor is demonstrated. Additionally demonstrated is a corrosion sensing technique which exploits the residual strain retention of the post-damage inspection sensor. Finally, the …

    vt Repository record for Applications of optical fiber sensors with thick metal coatings (opens in a new tab)

  11. Surface study of process contamination of plasma spray metal deposition process

    … steps applied to substrate surfaces for the metal coating process known as plasma spray metal deposition. Additionally, the surface effects resulting from different solvent cleaning steps applied to a Ni based alloy were investigated in detail using incident, angle resolved and thermal …

    rice Repository record for Surface study of process contamination of plasma spray metal deposition process (opens in a new tab)

  12. An Investigation of Wear-Resistant Coatings on an A390 Die-Cast Aluminum Substrate

    In this investigation, four coatings were tested for their ability to increase the wear life of A390 aluminum primary clutch sheaves used in continuously variable transmission (CVT). The coatings tested were: hard chrome, electroless nickel metal, hard coat anodizing and composite ceramic coating. …

    byu Repository record for An Investigation of Wear-Resistant Coatings on an A390 Die-Cast Aluminum Substrate (opens in a new tab) Download PDF for An Investigation of Wear-Resistant Coatings on an A390 Die-Cast Aluminum Substrate (opens in a new tab)

  13. Silicon nano-structure fabrication and application for surface-enhanced Raman spectroscopy

    … by severalfold even when using 66% less noble metal coating. We investigated the length gradient dependence and asymmetric properties of SERS effects for slanted nano-pillar with polarized excitation. This versatile and angle-controllable nano-pillar fabrication and monolithic 3D …

    uiuc Repository record for Silicon nano-structure fabrication and application for surface-enhanced Raman spectroscopy (opens in a new tab)

  14. Development of a Low Thermal Expansion Nanocomposite Resin for MSLA 3D Printer

    … (SLA) printed components coated with metals such as nickel often suffer from thermal failure at elevated temperatures. This happens due to a mismatch in coefficients of thermal expansion (CTE) between the base resin and the metal coating. To address this, a nanocomposite resin system …

    texas-state Repository record for Development of a Low Thermal Expansion Nanocomposite Resin for MSLA 3D Printer (opens in a new tab)

  15. Terahertz frequency doubling circuits for communications

    … using a polymer (SU-8) etching, layering and metal coating technology, is designed, constructed and measured. Such a device would be a fundamental component in a future terahertz frequency communication system.

    birmingham Download PDF for Terahertz frequency doubling circuits for communications (opens in a new tab)

  16. Electrochemical Deposition of Metal Organic-Modified-Ceramic Nanoparticles to Improve Corrosion and Mechanical Properties

    … Therefore, the need of developing protective coating to lower the cost of corrosion is very consistent. Among different methods, electrodeposition has been a popular method since it offer many advantages such as low cost, ability to control the surface and thickness of the coating, ability to …

    unt Repository record for Electrochemical Deposition of Metal Organic-Modified-Ceramic Nanoparticles to Improve Corrosion and Mechanical Properties (opens in a new tab)

  17. Desenvolvimento de compósitos cimentícios para cimentação de poços direcionais

    … Where, because of thermal expansion of the metal coating, not accompanied by the same ratio of cement sheath, crack formation occurs in the cementitious material, compromising the mechanical integrity of the void. Cements composite containing polymers has been studied to ensure a better …

    brazil-ufrn Repository record for Desenvolvimento de compósitos cimentícios para cimentação de poços direcionais (opens in a new tab)

  18. Creating Complex Hollow Metal Geometries Using Additive Manufacturing and Metal Plating

    … process to produce complex, hollow, metal geometries. The developed process uses electroless nickel plating on laser sintered parts that then undergo a flash burnout procedure to remove the polymer, leaving a complex, hollow, metal part. The resulting geometries cannot be produced …

    vt Repository record for Creating Complex Hollow Metal Geometries Using Additive Manufacturing and Metal Plating (opens in a new tab)

Page 1 of 5