Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 23 for “"Metal cutting process"”.
-
Ale simulation of chip formation in orthogonal metal cutting process
… in simulation of chip formation in orthogonal metal cutting process. A critical review of the literature in this field shows that due to the very complex set of conditions present in a cutting process, the application of conventional Lagrangian and Eulerian methods for this problem is …
-
Modeling and analysis of metal cutting process using self-propelled rotary tools
… the physical aspects and mechanics of this process. Thus, the current work focuses on three main pillars to fully address this research gap. The first pillar of this study presents a novel analytical model to predict the cutting forces and tool rotational speeds during the machining process …
-
Numerical Modeling of the Metal Cutting Process in the Plasma Arc Cutting
The process of cutting metal with a plasma arc cutting tool is investigated and discussed. Focus is on the metal cutting process at the inside surface of the kerf. This is an important region that is not well documented due to the difficulty of experiments and the complexity of computation needed …
-
PREDICTION OF CUTTING COEFFICIENTS DURING ORTHOGONAL METAL CUTTING PROCESS USING FEA APPROACH
… approach in which the complete machining process can be simulated and optimized before resorting to costly and time-consuming experimental trials. In this work, cutting coefficient of AISI 1045 steel will be estimated using finite element modelling using Arbitrary Lagrangian Eulerian …
-
A STUDY OF DIFFERENT FEM TECHNIQUES FOR MODELLING 3D METAL CUTTING PROCESS WITH AN EMPHASIZE ON ALE AND CEL FORMULATIONS
Finite element(FE) method has been used to model cutting process since 1970s. However, it requires special techniques to cope with the difficulties in simulating extremely large strain when compare to static or small deformation problems. With the advancement of FE techniques, researchers can now …
-
CALIBRATION OF THE JOHNSON-COOK FAILURE PARAMETERS AS THE CHIP SEPARATION CRITERION IN THE MODELLING OF THE ORTHOGONAL METAL CUTTING PROCESS
… is a numerical method widely used to predict the metal-cutting performance in both academic and industrial studies, avoiding the high expense and time consumption of experimental methods. The problem is how to calibrate reliable fracture-parameters as chip-separation criterion are implemented into …
-
The use of variable spindle speed for vibration control in face milling process
… is one of the most important issues in the metal cutting process. It has been recognized for several decades that many machining process performance measures are influenced by vibrations: e.g., surface finish, tool wear, and cutting force characteristics. Vibrations result in a poor surface …
-
Dynamic Modeling and Dynamic Analysis of the Boring Machining System
The boring operation is a metal cutting process widely used in industry. The inherent properties of the long, slender boring bar make it susceptible to self-excited chatter during machining. The main focus of this thesis is directed at developing a system model which correctly describes the boring …
-
Development of an in-process tool wear monitoring (ITWM) system using multiple regression (MR) and fuzzy logic (FL)
… versatility has not been optimized in the metal-cutting process due to the inability to control variable factors such as tool wear. The main focus of this research was the development of in-process tool wear monitoring (ITWM) to enable optimization of production and quality in CNC …
-
New Method For Testing The Dynamic Cutting Force Coefficients
<p> The dynamic behaviour of metal cutting process is investigated by measuring the Dynamic Cutting Force Coefficients. Measurements of eight components of the DCFC's are needed to describe completely the dynamics of metal cutting. This requires complex test apparatus and procedures, yet the …
-
Virtual turning system
… opposed to measurement of physical dimensions, cutting forces, torque, and power, they are predicted in virtual environment by integrating the laws of metal cutting process and the geometric and solid modeling of the tool-workpiece engagements along the tool path. The proposed Virtual Turning …
-
Feature-based methodologies for milling process modeling in Virtual Machining
… Machining is used to simulate the machining process prior to actual machining, thereby avoiding costly test trials on the shop floor. To realize Virtual Machining, two major methodologies, Geometric Modeling and Process Modeling, are required. In geometric modeling, Cutter/Workpiece …
-
FEM for the Determination of Temperature Distribution in Orthogonal Cutting Process
The study of metal cutting process is primarily aimed at reducing production cost. One way of reducing the cost of production would be to increase the speed at which metal is cut. However, since operating at high speed is found to decrease the tool life, an economic balance which takes into account …
-
Adaptive control for frictional and impact chatter in metal cutting via piezoelectric actuator
From the very beginning, metal cutting has had one troublesome obstacle in increasing productivity and accuracy, namely chatter. In machining, chatter is perceived as unwanted excessive vibration between the tool and workpiece, resulting in a poor surface finish and accelerated tool wear. It also …
-
A study of tool wear measurement by using image processing system
Cutting tools in a manufacturing system play a significant role in metal cutting process. Cutting tools arc consumable. Tool wear affects the outcomes of machining processes such as machined· surface quality and it is normally used as an indicating parameter for tool life. It is crucial to …
-
MEASUREMENT OF DYNAMIC CUTTING FORCE COEFFICIENTS
<p>The dynamic behaviour of metal cutting process is investigated by measuring the various components of dynamic cutting force. For the complete description of dynamics of metal cutting it is necessary to give eight components belonging to the resultant dynamic cutting force in an orthogonal …
-
IMPACT OF TRIBOSYSTEM COMPATIBILITY ON TOOL WEAR AND SURFACE INTEGRITY
… and TiAlCrN were tested in a hard machining metal cutting process. The impact of these coatings on tool wear, Cutting process (Chips) and Surface Integrity (Quality of machined surface) was assessed. This research involves characterizing the coating to understand how the formation of …
-
Numerical investigation on the formation mechanism of residual stress in metal cutting
… and distributions through all manufacturing processes. These stresses have a significant effect upon the performance of the final component. Understanding the residual stress imparted by machining is an essential aspect of understanding the machining process and overall part quality. Although …
-
Modelling, fault detection and active vibration control of rotor dynamic systems with applications in machine tools
… the dynamic deflection of the carriage during metal cutting process. Experimental verification of the proposed controller has been done to verify its effectiveness. The dynamics of cutting tools is represented in the form of time-delay systems. Different time-domain algorithms are used to …
Page 1 of 2