Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 93 for “"Metal foam"”.
-
Nonlinear vibration behavior of metal foam structures
Metal foam structures (MFS) show promising static and dynamic performances with some initial real-life applications. However, the dynamic behavior of MFS is not thoroughly addressed yet, which is one of the reasons that limits their use. This thesis studies their nonlinear vibration behavior for …
-
Investigation of heat transfer in metal-foam tubes
Nowadays metallic foams attract increasing attention in making compact heat exchangers due to its advanced thermal properties. In this project, the performance of forced convection and flow boiling heat transfer in metal-foam tubes has been investigated experimentally and theoretically. Compared to …
-
Thermo-Hydraulic Performance of Partially Blocked Metal-Foam Channels
… proposed to meet these demands, high-porosity metal foams have attracted the attention of many investigators due to their higher surface area densities as well as higher thermal performance due to the turbulence and tortuosity generated in the flow due to their structure. One of the …
-
Heat Transfer in Metal Foam Heat Exchanger at High Temperature
Heat transfer though open-cell metal foam is experimentally studied for heat exchanger and heat shield applications at high temperatures (~750°C). Nickel foam sheets with pore densities of 10 and 40 pores per linear inch (PPI), have been used to make the heat exchangers and heat shields by using …
-
MODELING OF A POROUS METAL FOAM CRYOGENIC COUNTER FLOW HEAT EXCHANGER
… modeling of cryogenic fluids through a porous metal foam counter flow heat exchanger. Although much research has been completed involving light weight high porosity metal foams in recent years, research performed on the subject of mid range porosities in metal foams and their use in heat …
-
Finite element modeling of metal foam structures subject to compressive loading
A unit-cell model was developed for open metallic foams in order to predict their effective elastic moduli and the plastic collapse strengths. The model is based on the metallic ligament frame of tetrakaidecahedral shape. The frame structure of the unit-cell was analyzed using the finite element …
-
Metal Foam Electrodes for the Removal of Mercury from Industrial Waters
… different platinum covered stainless steel metal foam electrodes in a batch reactor. The Hg concentrations used are on the same order as those of a condensate stream from a typical municipal solid waste incineration plant. Hydrogen absorption and double layer capacitance measurements are …
-
Metal foam regenerators; heat transfer and pressure drop in porous metals
Open pore metal foams with moderate porosity (0.6 – 0.7) may be of interest as regenerators due to their high volumetric heat capacity and large specific surface area. Replication process is a low cost and simple foam manufacturing method which provides moderate porosity metal foams. Due to its …
-
Achieving high efficiency thermoelectric heating and cooling with metal foam heat exchangers
… system using thermoelectric (TE) and reticulated metal foam (RMF) technologies to power a vehicle`s battery thermal management system. The focus is split into two areas: first a review of TE’s sourcing or removing heat, second an examination of compact heat exchanger (HX) design. Five TE suppliers …
-
Natural convection in water-saturated metal foam with a superposed fluid layer.
… an enclosure with a horizontal layer of copper foam and an overlying water layer, heated from below. The foam was placed between two parallel plates in a cylindrical enclosure adjacent to either one or both boundaries. The cylindrical copper foam disks were manufactured by ERG Aerospace with 127 …
-
Metal-foam interface stability during the filling of lost foam moulds with aluminium alloys
Aluminium Lost Foam castings were made using gravity and counter-gravity filling techniques. Tensile strength was found to be most uniform in those castings which had been filled slowly from the bottom and where the metal front had remained stable throughout filling sequence. Pores containing …
-
Thermal Hydraulic Performance of Aluminum Metal Foam Heat Exchangers with Varying Cellular Lattice Structures
… density, and high strength structure, aluminum metal foams offer a promising application for heat exchangers. One significant design challenge of aluminum foam heat exchangers is optimizing the trade-off between heat transfer performance and pressure drop (i.e., pumping power). Previous …
-
Development of cost-effective alternatives to conventionally-manufactured metal foam for industrial turbine combustors
The work presented here aims to provide design guidelines to create vortex-damping structures. A design of experiment was developed to investigate the individual and combined effects of the geometrical properties of planar regular grid structures, i.e., the wire diameter, the porosity, and the …
-
Characterization of Thermo-Fluid Transport Properties of Coated and Uncoated Open-Cell Metal Foam Monoliths
… uncoated and catalyst-support coated aluminium foam monoliths. The values of hvol were recovered by parameter fitting its model values to experimental temperature data for steady-state air-cooled monoliths under a known heating flux. The model was built with experimentally recovered values of …
-
Analytical and Numerical Modeling of Fluid Flow and Heat Transfer through Open-cell Metal Foam Heat Exchangers
… fluid flow and heat transfer through open cell metal foam heat exchangers are presented. Primarily, different representative unit cell approximations, i.e, tetrakaidecahedron, dodecahedron and cubic are discussed. By applying the thermal resistance analogy, a novel formulation for evaluation of …
-
Thermal properties of disodium hydrogen phosphate dodecahydrate coated metal foam/sodium acetate trihydrate composite as phase change material
… of fusion. In this study, aluminum and copper foams with pore sizes of 40, 80, and 110 pores per inch (PPI) coated with disodium hydrogen phosphate dodecahydrate were prepared and their effects on the SAT solidification temperature, latent heat of fusion, and thermal conductivity were …
-
Surface Modifications of Graphene Oxide for Enhanced Oil Recovery and Efficient Catalysts on Metal Foam for Water/Seawater Electrolysis
… electrolysis. By the surface modifications of metal foam (Ni and Cu), we successfully synthesized the catalysts whose surface is super hydrophilic, highly corrosion-resist, hierarchical porous, and optimized for adsorption energy of intermediates for water electrolysis. Those surface properties …
-
Heat Transfer Enhancement from a Horizontal Cylinder Wrapped with a Porous Layer of Metal Foam: Experimental and Numerical Studies
… from a horizontal cylinder wrapped with metal foam layer in forced flow. Two configurations are investigated, whole and segmented metal foam layers of two different thicknesses but same porous material properties. For the experimental study, the metal foam configurations are tested at …
-
Analysis of Thermal Management and Dynamic Dimensional Energy Storage Systems incorporating Heterogeneous Metal Foams, Nano-composites, and Thermoelectric Generators
… the effect of the addition of nanoparticles and metal foam on phase change processes inside constant volume and constant thermal capacity thermal energy storage (TES) systems. The dimensions of TES systems are dynamically adjusted upon the addition of nanoparticles and metal foam to maintain the …
Page 1 of 5