Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 29 for “"Metal silicides"”.
-
Bonding in transition-metal silicides studied via soft-x-ray-emission spectroscopy
<p>Transitional metal (TM) silicides have been studied extensively due to their potential value as conducting overlayers in devices, and for the insight they provide into interactions at metal-semiconductor interfaces. A fundamental understanding of the electronic structure of the bulk electronic …
-
SOLID SOURCE CHEMICAL VAPOR DEPOSITION OF REFRACTORY METAL SILICIDES FOR VLSI INTERCONNECTS.
… have properties comparable to standard metal-oxide-silicon systems. The substitution of CVD silicides for standard MOS gate metals appears to be transparent in terms of transistor performance, except for work function effects on the threshold voltage. The large wafer throughput and good …
-
GROWTH OF THE TRANSITION METAL SILICIDES FILMS FROM SINGLE SOURCE PRECURSORS BY MOCVD
… Fe(CO)4(SiCl3)2, which lead to the formation of silicides films. UPS studies and DFT calculations of these precursors and CVD reactions are reported as well. The thesis is divided into six chapters. Chapter 1 reviews the MOCVD of various precursors leading to the formation of transition metal …
-
M5Si3 (M=Ti, Nb, Mo) based transition-metal silicides for high temperature applications
<p>Transition metal silicides are being considered for future engine turbine components at temperatures up to 1600ºC. Although significant improvement in high temperature strength, room temperature fracture toughness has been realized in the past decade, further improvement in oxidation resistance …
-
Superconductivity in ternary rare earth transition metal silicides and germanides with the Sc5Co4Si10-type structure
… properties of some ternary rare earth transition metal silicides and germanides of the Sc(,5)Co(,4)Si(,10)-type is reported in this work. Low temperature heat capacity measurements indicate the presence of a complicated phonon density of states in these structurally complex compounds. A better …
-
Doping Effects on Transition-Metal Silicides: Crystal Structures and Physical Properties of Aluminium Doped Rhenium Silicide
Semiconductive transition-metal silicides (e.g., ReSi) express weak thermoelectric properties. These properties can improve through n-type or p-type doping (e.g., Al), resulting in altered crystal structures. Binary rhenium silicide (ReSi1.75) exhibits promising thermoelectric properties and an …
-
STUDIES ON PREPARATION AND MAGNETIC AND ELECTRICAL PROPERTIES OF TERNARY RARE EARTH FIRST-ROW TRANSITION METAL SILICIDES
This is the author's version of a work that was accepted for publication in physica status solidi (a). Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms, may not be reflected in this document. …
-
Metal silicon interactions: the electronic structure of transition metal silicides as a basis for metal silicon interface studies
Contains fulltext : mmubn000001_116775297.pdf (Publisher’s version ) (Open Access)
-
Studies of the local atomic ordering in nanostructured amorphous materials using advanced scanning transmission electron microscopy techniques
… two different classes of materials - amorphous metal silicides (MoSix, NbSix and WSix), and amorphous oxides (TiO2 doped Ta2O5 and SiO2). In each case, short range order in the amorphous metal silicides was found to be A15 like, with atom spacing that varied with atomic number, as expected. …
-
TEM Study of a RTO Oxide-Interfacial Layer on Epitaxial-Cobalt Silicide (CoSi2) Formation
Metal silicides have been used for some time as a contact diffusion barrier. CoSi2 has been attracting a lot of interest due to its low sheet resistance, thermal stability, low stress state and interfacial uniformity with the silicon substrate. Recently, there has been many studies to investigate …
-
Investigation of micromechanical properties of tungsten silicide thin films
… equilibrium of the environment. The refractory silicides are some of the compatible materials used to integrate the micromechanical structures and the interfacing electronic circuits on the same chip. As a result of this, the thermodynamic, electrical and mechanical properties of transition …
-
Synthesis, characterization, and phase stability of high temperature thermoelectric metal borides and silicides
… was made on selected alkaline earth metal borides (CaB6, and SrB6,) and silicides (Mg2Si and CaSi) and transition metal borides and silicides of ABX-type (A = Ti/ Nb/ Mn; B = Co; X = B/Si). Screening of the alloys were done based on the available literature/calculations of energy band …
-
Skyrmion-hosting B20-type MnSi films on Si substrates grown by flash lamp annealing
… route for the fabrication of B20-type transition metal silicides for integrated and/or hybrid spintronic applications on Si(100) wafers, which are more preferable for industry applications. The growth of MnSi films on Si(111) substrates has been widely realized by solid phase epitaxy or molecular …
-
Surface Plasmon Hosts For Infrared Waveguides And Biosensors, And Plasmons In Gold-black Nano-structured Films
… range including doped semiconductors, semimetals, and conducting polymers. One outcome of this work has been the demonstration of a simple analytic formula for calculating the SPP absorption resonances in the angular reflectance spectra of gratings. It is demonstrated for Ag lamellar …
-
Coating of macroporous materials with graphitic carbon nitrides: new materials for visible light photocatalysis
… oxidation or reduction, or are too costly. Some metal silicides have a narrow range of band gap energy, allowing the absorption of visible light and they have been suggested as photocatalysts for hydrogen generation without a sacrificial reductant. A report describes inexpensive commercial TiSi2 …
-
Processing, Stability and High-Temperature Properties of Transition Metal Silicide-Refractory Oxide Composites for Electrical Applications
… by incorporating the 20-90 vol% of transition metal silicides (MoSi2, WSi2, NbSi2, TaSi 2, CrSi2) within refractory oxides (Al2O 3, ZrO2, Cr2O3), followed by sintering at 1370°-1600°C in argon. The densification, microstructural evolution, phase development and thermal stability of the …
-
Three Dimensional Integration (3DI) of semiconductor circuit layers: new devices and fabrication process
… Low temperature ohmic contact and utilization of metal-silicides for the proposed device are considered in this chapter. Finally in Chapter 6 various computer verifications for this work is presented, and in Chapter 7 experimental results to support this work is included.</p>
-
Fundamental Understanding and Functionality of Silicon Oxycarbide
… desired in numerous applications. Transition metal-containing SiOC composites have more functional properties over pure SiOC and receive more attention in different areas. High-temperature resistant TiC/SiOC was successfully synthesized by pyrolysis of polysiloxane (PSO) and titanium …
Page 1 of 2