Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 167 for “"Metal structures"”.

  1. Metal structures for photonics and plasmonics

    The goal of this thesis is to investigate metal structures for photonics and plasmonics and to provide theoretical and experimental bases for their practical applications. Engineered micro- and nanostructures of a metal can efficiently manipulate surface plasmon polaritons (SPPs) - coupled …

    umn Repository record for Metal structures for photonics and plasmonics (opens in a new tab)

  2. Microstructural Characterization of 3D Deposited Metal Structures

    … prepared for EBSD using modification to standard metallography techniques. The average grain size was 5.73 µm with a random texture, suggesting a heat treatment used to remove the polymer template. Secondly, we studied mesoporous nickel samples. A measure of particle size as well as deposition …

    queens Repository record for Microstructural Characterization of 3D Deposited Metal Structures (opens in a new tab)

  3. A Study of Prestressed Metal Structures for Buildings

    Made available in DSpace on 2015-05-12T17:06:21Z (GMT). No. of bitstreams: 2 license.txt: 4848 bytes, checksum: 96035ab3f5e1c23cc7138a224ce498bd (MD5) 0019868.PDF: 3907266 bytes, checksum: 1840c399f93054fc5311be589f882ed7 (MD5) Previous issue date: 1956

    uiuc Repository record for A Study of Prestressed Metal Structures for Buildings (opens in a new tab)

  4. Electroforming and electron emission in metal-borosilicate glass-metal structures

    … (borosilicate) films in the form of sandwich structures of M-SiO B203 –M (diode) and M-SiOx/B2O3-N-SiOx/B2O3-M (triode) have been studied. Diode and triode systems show electroforming effects and subsequently electron emission, voltage-controlled negative resistance, electroluminescence, and …

    brunel Repository record for Electroforming and electron emission in metal-borosilicate glass-metal structures (opens in a new tab)

  5. Thermal residual stresses in bonded composite repairs on cracked metal structures

    … strains in bonded composite repairs on cracked metal structures. This work is an essential contribution to a fatigue damage initiation model for bonded composite repair, where knowledge of the initial stress/strain state after an elevated temperature cure is important. Furthermore, this work is …

    ubc Repository record for Thermal residual stresses in bonded composite repairs on cracked metal structures (opens in a new tab) Download PDF for Thermal residual stresses in bonded composite repairs on cracked metal structures (opens in a new tab)

  6. Characterizing carrier transport in silicon thin film metal semiconductor metal structures

    … operational simplicity and ease of fabrication, metal semiconductor metal thin film structures have been the focus of attention for many researchers, specifically in studies related to the development of optoelectronic devices. In this study, extensive three dimensional simulations and analysis …

    missouri Repository record for Characterizing carrier transport in silicon thin film metal semiconductor metal structures (opens in a new tab)

  7. FABRICATING POROUS METAL STRUCTURES CAPABLE OF CAPILLARY ACTION THROUGH ADDITIVE MANUFACTURING

    … pipes in aerospace applications where heavier metals like copper and steel would be less desirable. This can be used for rapid, compact cooling of heat generating systems. However, traditional methods of manufacturing porous wicks can prove ineffective for complicated geometries, as fine …

    nps Repository record for FABRICATING POROUS METAL STRUCTURES CAPABLE OF CAPILLARY ACTION THROUGH ADDITIVE MANUFACTURING (opens in a new tab)

  8. Modeling Leakage Currents in Metal Insulator Metal Structures with High K Materials

    … Such leakage currents are detrimental in Metal-Insulator-Metal capacitors that are the next generation capacitors for Radio Frequency (RF), DRAM (Dynamic Random Access Memory), and analog/mixed signal ICs applications. Hence, a detailed understanding of transport process is required to …

    odu Repository record for Modeling Leakage Currents in Metal Insulator Metal Structures with High K Materials (opens in a new tab)

  9. FABRICATION AND STUDY OF MOLECULAR DEVICES AND PHOTOVOLTAIC DEVICES BY METAL/DIELECTRIC/METAL STRUCTURES

    … spacing can be produced at the edge of patterned metal/insulator/metal this film structures. A key challenge is to produce insulator layers with low leakage current and have pristine metal contacts for controlled molecular contacts. Atomic layer deposition of high quality Al2O3 thin films onto Au …

    uky-thes Repository record for FABRICATION AND STUDY OF MOLECULAR DEVICES AND PHOTOVOLTAIC DEVICES BY METAL/DIELECTRIC/METAL STRUCTURES (opens in a new tab)

  10. Refinement of TI-6%AL-4%V weld metal structures during gas-tungsten arc welding

    the-open-u

  11. Inherently Porous Metal Structures with Sufficient Mechanical Properties Through Direct Writing of Bio-based Inks

    … a burgeoning interest in developing 3D printed metal structures with inherent porosity and sufficient mechanical properties for mass customization in the biomedical field. Current approaches for 3D printing of biocompatible metals rely on powder-bed fusion methods which are energy intensive and …

    wvu Repository record for Inherently Porous Metal Structures with Sufficient Mechanical Properties Through Direct Writing of Bio-based Inks (opens in a new tab)

  12. Design and Characterization of Additively Manufactured Lightweight Metal Structures with Equivalent Compliance and Fatigue Resistance

    … starting at the atomistic level, to realize structures with lighter weights. However, it is still begin used primarily as a rapid prototyping tool due to challenges arising from various issues that need to be addressed before commercial parts can be deployed. Three of those issues are: (1) …

    maryland Repository record for Design and Characterization of Additively Manufactured Lightweight Metal Structures with Equivalent Compliance and Fatigue Resistance (opens in a new tab)

  13. Evaluation of machine-learning models for load-carrying capacity assessment of components of light metal structures

    … load carrying capacity of components in light metal structures. The study includes investigations on cold formed steel channel sections with and without openings, subjected to axial compression and web crippling, as well as a separate study on aluminium roof sheeting under wind uplift. To …

    auckland-ms Repository record for Evaluation of machine-learning models for load-carrying capacity assessment of components of light metal structures (opens in a new tab)

  14. Growing ZnO nanowires through electrochemical deposition for spintronic applications with metal-insulator-metal structures as tunnel junctions

    … deposition method of synthesizing zinc oxide nanostructures on inorganic substrates. By following up with microscopic analysis, we imaged the morphology and hypothesized the growing mechanism. Presenting a systematic study of the effect of the experimental parameters (concentration, growing …

    missouri Repository record for Growing ZnO nanowires through electrochemical deposition for spintronic applications with metal-insulator-metal structures as tunnel junctions (opens in a new tab)

  15. Probability of Detection for Corrosion-induced Mass Loss and Yield Strain in Metal Structures Using Fe-C Coated Long Period Fiber Gratings Sensors and Electroresistive Strain Gauges

    "Graphene-based, Fe-C coated long-period fiber grating (LPFG) sensors individually reveal a causal relation between LPFG wavelength change and Fe-C mass loss. Their correlation parameters vary significantly between the sensors mainly because hydrophobic multilayer graphene and graphene oxide make …

    must-thes Repository record for Probability of Detection for Corrosion-induced Mass Loss and Yield Strain in Metal Structures Using Fe-C Coated Long Period Fiber Gratings Sensors and Electroresistive Strain Gauges (opens in a new tab)

  16. A new architecture as transparent electrodes for solar and IR applications based on photonic structures via soft lithography

    … has been research on a variety of electrode structures involving carbon nanotube networks, graphene films, nanowire and nanopatterned meshes and grids. Due to their novel characteristics in light manipulation and collection, photonic crystal structures show promise for further improvement. …

    iastate Repository record for A new architecture as transparent electrodes for solar and IR applications based on photonic structures via soft lithography (opens in a new tab)

Page 1 of 9