Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 34 for “"Metallic Fuel"”.

  1. Development of a New Tool for Metallic Fuel Performance Evaluations

    Accurate evaluations of fuel behavior is a crucial part in the determination of fuel operation limits and in the verification of burnup capabilities and reliability characteristics. In-pile behaviors of metallic fuels are closely connected with one another under a wide variety of irradiation …

    tamu Repository record for Development of a New Tool for Metallic Fuel Performance Evaluations (opens in a new tab)

  2. Design and Analysis for Melt Casting Metallic Fuel Pins Incorporating Volatile Actinides

    Fundamental issues related to the selection of a metallic fuel casting furnace design are presented and discussed including heating mechanisms, casting issues, crucible design, and issues related to the mass transport of americium. The process of evaluating all of these different criteria is …

    unlv Repository record for Design and Analysis for Melt Casting Metallic Fuel Pins Incorporating Volatile Actinides (opens in a new tab) Download PDF for Design and Analysis for Melt Casting Metallic Fuel Pins Incorporating Volatile Actinides (opens in a new tab)

  3. Development of Metallic Fuel Additives and Alloys for Sodium-cooled Fast Reactors

    … to develop effective additives for U-10Zr (wt.%) metallic fuel to mitigate the fuel-cladding chemical interactions (FCCIs) due to fission product lanthanides and to optimize the fuel phase mainly by lowering the gamma-onset temperature. The additives Sb, Mo, Nb, and Ti have been investigated. …

    vt Repository record for Development of Metallic Fuel Additives and Alloys for Sodium-cooled Fast Reactors (opens in a new tab)

  4. As-cast uranium-molybdenum based metallic fuel candidates and the effects of carbon addition

    … of this research was to develop and recommend a metallic nuclear fuel candidate that lowered the onset temperature of [gamma] phase formation comparable or better than the uranium-10 wt. pct. molybdenum alloy, offered a solidus temperature as high or higher than uranium-10 wt. pct. zirconium …

    colo-mines Repository record for As-cast uranium-molybdenum based metallic fuel candidates and the effects of carbon addition (opens in a new tab)

  5. Preparation and Evaluation of Uranium Alloys Based on Burnup

    Next generation fast reactor designs utilizing metallic fuel are being developed as an alternative fuel cycle option in an effort to reduce carbon emissions. Historically, oxide fuels have been the industry standard, but interest in metallic fuel systems has grown considerably due to their thermal …

    unlv Repository record for Preparation and Evaluation of Uranium Alloys Based on Burnup (opens in a new tab) Download PDF for Preparation and Evaluation of Uranium Alloys Based on Burnup (opens in a new tab)

  6. MESOSCALE MODELING OF GRAIN REFINEMENT IN SOLIDS

    … of the sub-grains. For polycrystalline ceramic fuel UOv2 and the metallic fuel U-Mo, the model simulated the high burn-up structure (HBS) formation and evolution. In the case of UOv2, the model predicts the average size of the recrystallized grains within the range of 0.3 to 0.5 microns …

    tamu Repository record for MESOSCALE MODELING OF GRAIN REFINEMENT IN SOLIDS (opens in a new tab)

  7. Innovative Fuel Design to Improve Proliferation Management

    This research uses an existing innovative fuel design (IFD) that has intrinsic safety features and enhanced economics over the current uranium dioxide (UO2) light water fuel design and evaluates promising methods to improve the waste management and proliferation resistance of the IFD by doping the …

    vcu Repository record for Innovative Fuel Design to Improve Proliferation Management (opens in a new tab)

  8. An apparatus for measurement of ignition and burning characteristics of metallic particles

    … ignition and combustion characteristics of metallic fuel particles and liquid fuel droplets. The design was tailored around the available data acquisition systems and diagnostic instruments. The apparatus consisted of a small windowed combustion bomb, a C02 laser for particle ignition, a …

    nps Repository record for An apparatus for measurement of ignition and burning characteristics of metallic particles (opens in a new tab)

  9. A conceptual design of a propulsion system for an autonomous underwater vehicle

    … plant using a chemical energy heat source with a metallic fuel. A thruster system using electric propulsion motors and screw propellers is selected. Evaluation factors include reliability, depth independent operation, weight, endurance, quietness and efficiency. Reliability of the proposed system …

    unh-thes Repository record for A conceptual design of a propulsion system for an autonomous underwater vehicle (opens in a new tab)

  10. Design and Simulation of an Induction Skull Melting System

    … volatile actinides, mainly americium into a metallic fuel pin (MFP) has been a serious problem due to americium’s high vapor pressure. An Induction Skull Melting (ISM) system was identified by Argonne National Laboratory (ANL) as a potential furnace design to cast MFPs. Through the …

    unlv Repository record for Design and Simulation of an Induction Skull Melting System (opens in a new tab) Download PDF for Design and Simulation of an Induction Skull Melting System (opens in a new tab)

  11. Atomistic Study of the Structure, Thermodynamics, and Morphological Evolution of Uranium-Zirconium Alloys

    … was conducted, a promising nuclear reactor metallic fuel. A semi-empirical modified embedded atom method (MEAM) potential was developed for application to the high temperature body-centered-cubic uranium-zirconium alloy (γ-U-Zr) phase and checked against numerous first principles and …

    gatech Repository record for Atomistic Study of the Structure, Thermodynamics, and Morphological Evolution of Uranium-Zirconium Alloys (opens in a new tab)

  12. Hydraulic ram effect on composite fuel entry walls.

    … failure of a partially filled aircraft fuel cell due to impact and penetration by a high speed projectile often occurs due to a phenomenon known as hydraulic ram. The structural response of the fuel tank walls to hydraulic ram should be of vital concern to the designers of aircraft fuel …

    nps Repository record for Hydraulic ram effect on composite fuel entry walls. (opens in a new tab)

  13. Modeling and Analysis of Actinide Diffusion Behavior in Irradiated Metal Fuel

    … been numerous attempts to model fast reactor fuel behavior in the last 40 years. The US currently does not have a fully reliable tool to simulate the behavior of metal fuels in fast reactors. The experimental database necessary to validate the codes is also very limited. The DOE-sponsored …

    unm Repository record for Modeling and Analysis of Actinide Diffusion Behavior in Irradiated Metal Fuel (opens in a new tab)

  14. Interdiffusion Study Of Mg-aa6061 System

    … is the development of diffusion barrier for U-Mo metallic fuel in Al-alloy cladding, where Mg, with its complete immiscibility with U and Mo is being considered as the diffusion barrier. While negligible diffusional interaction between Mg and U-Mo alloys have been reported, diffusional interaction …

    ucf Repository record for Interdiffusion Study Of Mg-aa6061 System (opens in a new tab)

  15. A Study of the Morphology of Porosity in Sintered Uranium-Zirconium Alloys as a Function of Sintering Time

    … to evaluate the sintering behavior in U-10Zr metallic fuel for advanced nuclear fuel simulations in the MOOSE/MARMOT simulation environment. Uranium microspheres (180 to 45 micron in diameter) produced in the Rotating Electrode System (RES) were mixed with purchased zirconium microspheres (<44 …

    tamu Repository record for A Study of the Morphology of Porosity in Sintered Uranium-Zirconium Alloys as a Function of Sintering Time (opens in a new tab)

  16. Preparação de óxidos mistos de níquel e zinco nanoparticulados a partir de combustíveis alternativos

    … route using three specific types of organic fuels employing the weight ratios 1:1/2 and 1:1 of cation metallic/fuel, in order to investigate the influence of such proportions to obtain the solids. The new fuels were chosen to replace, for example, urea or glycine that are the fuels most …

    brazil-ufrn Repository record for Preparação de óxidos mistos de níquel e zinco nanoparticulados a partir de combustíveis alternativos (opens in a new tab)

  17. Piezoresistivity Characterization of Polymer Bonded Energetic Nanocomposites under Cyclic Load Cases for Structural Health Monitoring Applications

    … the inert energetic and atomized aluminum as the metallic fuel, both of which were combined to create a representative fuel-oxidizer filler often used for aerospace propulsive applications. MWCNTs were dispersed within an elastomer binder of polydimethylsiloxane (PDMS), and hybrid energetics were …

    vt Repository record for Piezoresistivity Characterization of Polymer Bonded Energetic Nanocomposites under Cyclic Load Cases for Structural Health Monitoring Applications (opens in a new tab)

  18. Interdiffusion Reaction Between Uranium-zirconium And Iron

    U-Zr metallic fuels cladded in Fe-alloys are being considered for application in an advanced Sodium-Cooled Fast Reactor (SFR) that can recycle the U-Zr fuels and minimize the long-lived actinide waste. To understand the complex fuel-cladding chemical interaction of the U-Zr metallic fuel with …

    ucf Repository record for Interdiffusion Reaction Between Uranium-zirconium And Iron (opens in a new tab)

  19. Investigation on Nitric Oxide and Soot of Biodiesel and Conventional Diesel using a Medium Duty Diesel Engine

    Biodiesel has been suggested as an alternative fuel to the petroleum diesel fuel. It beneficially reduces regulated emission gases, but increases NOx (nitric oxide and nitrogen dioxide) Thus, the increase in NOx is the barrier for potential growth of the biodiesel fuel. In general, NOx formation is …

    tamu Repository record for Investigation on Nitric Oxide and Soot of Biodiesel and Conventional Diesel using a Medium Duty Diesel Engine (opens in a new tab)

Page 1 of 2