Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 28 for “"Metallic bonding"”.
-
Laser processing of metallic surfaces for controlled micro-texturing and metallic bonding
This study investigated the development of a novel method for designing high-end interference fit fasteners. In this work, a new surface laser treatment process was developed and implemented to enable enhanced usability and bond strength control of interference-fit connections. Stainless steel 316L …
-
Cold Gas Dynamic Spray Impact: Metallic Bonding Pre-Requisites and Experimental Particle In-Flight Temperature Measurements
… particles can bond onto a target surface. This bonding is caused by the resulting interfacial deformation processes occurring at the contact interface. Hence, the process relies heavily on the gas/particle and particle/substrate interactions. Although numerous experimental and/or numerical …
-
Structural health monitoring of onshore wind turbine foundations
… into the effectiveness of epoxy and metallic bonding for FBG attachment demonstrates that purely metallic bonding may provide an improved sensor design. Particularly, a humidity dependence was observed in industry standard epoxies in the form of swelling, with the metallic bonding …
-
Οπτικοηλεκτρονικά κυκλώματα υψηλής πυκνότητας ολοκλήρωσης για υψίρυθμα φωτονικά μικροσυστήματα
… this work a SiO₂/SOG (Spin-On-Glass) based and a metallic bonding technique are proposed which can be used for the bonding of the photonic wafer on the CMOS wafer. Definition of the procedure and identification of critical steps are taking place and finally implementation of an in-plane optical …
-
Relationship between electronic structure, phase stability and mechanical properties in the transition metal carbides, nitrides and carbo-nitrides
… rocksalt (NaCl) crystal structure and covalent-metallic bonding character; furthermore, they all exhibit large rocksalt phase homogeneity ranges, with structural vacancies accommodating off-stoichiometry. Yet they exhibit surprisingly varied hardness behaviors: some, like TiC, are seen to lose …
-
High-Pressure Structural and Bonding Evolution of Superconducting Titanium and Scandium
… alter their electronic, vibrational, and bonding properties. Through systematic analysis of their low- and high-pressure phases—such as α, ω, γ, and δ for Ti, and Sc-I to Sc-V for scandium—we uncover a clear evolution from localized, metallic bonding to delocalized, multi-centered …
-
Study of the anisotropic sintering shrinkage of green iron and stainless steel
… sintered to promote the formation of metallic bonding between the powder particles. The differences in terms of geometrical and dimensional features between the green compact and the final part are related to the dimensional variations occurring during sintering, therefore, to preserve …
-
Phase Transformations in Refractory High Entropy Alloys
… enhance the stability of B2 intermetallic phase which provides the strength when present in a BCC matrix, multicomponent B2 phase compositions stable at 1000°C in some of the above studied alloys, were melted separately. The aim was to establish a single phase B2 at 1000°C and …
-
Elucidating the Mechanical Response of Metallic Glasses Prepared in Different Structural States at Sub-Micron Length Scales
Metallic glasses (MGs) exhibit both high yield stresses and elastic strain limits owing to their metallic bonding character and lack of long-range order. Yet the structural state (i.e. local atomic packing), and the corresponding elastic and plastic mechanical response, of MGs is nuanced and …
-
Diffusion of adatoms on face-centered cubic transition metal surfaces
… state energies differ due to the variation of metallic bonding with coordination for the different types of metal atoms. This variation with coordination is reflected in the surface energies of the two metals, and thus this macroscopic quantity can be used to correlate the amount of energy …
-
Catalytic activation of Rh,Pd nanoclusters supported on Ceria
… present on the surface of CeO2-x are reduced to metallic form under the reducing environment of the ESR reaction. Here we report X-Ray Photoelectron Spectroscopy (XPS), X-Ray Absorption Spectroscopy (XAS) and High Resolution Transmission Electron Microscopy (HRTEM) studies on the catalytic …
-
The Topology and Electronic Stability of Solvent-Rich Metallic Glasses
… which shall ideally introduce predominantly metallic bonding among the atomic constituents by maximising the like-like atomic bonds in the amorphous structure. Potentially leading to extended ductility and increases the likeliness that the resultant material may exhibit many of the …
-
Design and Fabrication of Long -Wavelength Vertical -Cavity Surface -Emitting Lasers Using Wafer Bonding Technologies
… and the fabrication complexity of direct wafer bonding. In this work, a novel VCSEL fabrication method facilitated with new wafer bonding techniques has been developed to overcome these limitations. This process scheme provides more options on the DBR and substrate materials for long-wavelength …
-
Defect-induced local electronic structure modifications within the system SrO - SrTiO3 - TiO2
… oxides span the range of ionic, covalent and metallic bonding. They exhibit a vast diversity of electronic phenomena such as high dielectric, piezoelectric, pyroelectric, ferroelectric, magnetic, multiferroic, catalytic, redox, and superconductive properties. The nature of these properties …
-
Metallurgical Issues in Low-Temperature Joining of Silver Nanowires
… the interfaces and promoted atomic diffusion and metallic bond formation while the bulk component temperature maintaining near room-temperature. The organic layer on the side surfaces of the Ag NWs could be broken down through consumption of the residual PVP by a CuO-PVP reaction and which …
-
Understanding the role of oxidation in bonding of aluminium alloys
<p>The main aim of this work is to study the bonding behaviour of Al alloys as a function of temperature, time and processing conditions from a perspective of oxidation so as to gain a comprehensive knowledge of the oxidation issues during processing and to design better bonding approaches for …
-
Material Behavior During High Velocity Impacts - Novel Numerical Approaches
… a low energy input. In CS, the deformation and bonding processes happen in a very short time (less than 100 ns). With the current technology, in-situ investigation is almost impossible. In this situation, numerical modeling methods are the best alternative to study the deposition process. There …
-
High-throughput Exploration of Glass Formation via Laser Deposition and the Study of Heterogeneous Microstructure in a Bulk Metallic Glass Alloy
Bulk metallic glasses are a relatively novel class of engineering alloys characterized by a "disordered" atomic structure devoid of long-range translational symmetry. Compared to crystalline alloys, the confluence of metallic bonding and amorphous structure imbues bulk metallic glasses with a …
-
Advance Metallic Reinforcement of Vat Photo Polymerized Parts
The metallization or metallic reinforcement of polymer parts has been widely used in industry for several decades. Polymer parts are classically metalized for aesthetics, chemical and thermal resistance, electrical conductivity, and mechanical strength. Metallization has been shown to increase …
-
Experimental and Theoretical Investigations of Magnetic, Electronic Structure, and Hyperfine Interaction Properties of New Fe-Based Superconductors and EuFeAs₂
… for a mixture of ionic and covalent chemical bonding and metallic characteristics. We present a detailed analysis of the calculated energy band structure of ThFeAsN. A quadrupole doublet well describes the shape of the Mössbauer spectra with a small quadrupole splitting that increases with …
Page 1 of 2