Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 19 of 19 for “"Metallic plates"”.

  1. An Approach to Model Plastic Deformation of Metallic Plates in Hypervelocity Impact Experiments

    … an approach for studying plastic deformation of metallic plates under HVI conditions. A two-stage light gas gun can be used to simulate these conditions under controlled experimental conditions. In all gas gun experiments, projectiles are driven by light gas propellants (typically Hydrogen or …

    unlv Repository record for An Approach to Model Plastic Deformation of Metallic Plates in Hypervelocity Impact Experiments (opens in a new tab) Download PDF for An Approach to Model Plastic Deformation of Metallic Plates in Hypervelocity Impact Experiments (opens in a new tab)

  2. Laser-Induced Acoustic Signal Generation, Resonance Characterization, and Optical Sensing in Metallic Plates

    … characterization, and optical sensing in metallic plates as a foundational study for damage-sensitive inspection. Rather than presenting a complete defect-detection system, the work focuses on how measurable acoustic responses can be generated, amplified, and interpreted in a controlled …

    clemson Repository record for Laser-Induced Acoustic Signal Generation, Resonance Characterization, and Optical Sensing in Metallic Plates (opens in a new tab)

  3. Damage Detection of Submerged Structures Using Linear and Nonlinear Guided Waves

    Metallic plates are one of the major components of liquid containment structures and are widely used in petrochemical and civil engineering. In many cases, the metallic plates have one side exposed to liquid and are subjected to different types of loads with varying amplitudes. Corrosion damage and …

    adelaide Repository record for Damage Detection of Submerged Structures Using Linear and Nonlinear Guided Waves (opens in a new tab)

  4. Response and failure mechanisms of structural member under high velocity impact

    … emphasis on strain rate effect are proposed for metallic plates and concrete slabs. Both models are implemented as a used defined material model in the LS-DYNA and verified against several HVI problems. The numerical simulations using the proposed models show a good agreement with the …

    nus Repository record for Response and failure mechanisms of structural member under high velocity impact (opens in a new tab) Download file for Response and failure mechanisms of structural member under high velocity impact (opens in a new tab)

  5. A theory of local photons with applications in quantum field theory

    … attractive force between two highly-reflecting metallic plates without having to invoke regularisation procedures.

    whiterose Download PDF for A theory of local photons with applications in quantum field theory (opens in a new tab)

  6. Quantitative Structural Diagnosis of Plate-like Structures using Multi-frequency Lamb Wave Diffraction Tomography

    … can be used in plate-like structures, such as metallic plates and composite laminates. One of the main areas of research in LWDT is investigating the effects of multiple non-central frequency components of data on the image quality and utilizing information from these multiple frequencies to …

    adelaide Repository record for Quantitative Structural Diagnosis of Plate-like Structures using Multi-frequency Lamb Wave Diffraction Tomography (opens in a new tab)

  7. Processing and evaluation of long fiber thermoplastic composite plates for internal fixation

    The metallic plates used in internal fracture fixation may have up to ten times the elastic modulus of normal bone tissue, causing stress shielding-induced osteopenia in healed bone that can lead to re-fracture after plate removal and prolonged and painful recovery. Thermoplastic polymer matrix …

    uab Repository record for Processing and evaluation of long fiber thermoplastic composite plates for internal fixation (opens in a new tab)

  8. DEVELOPMENT AND PERFORMANCE EVALUATION OF BONE ADHESIVE FOR METAPHYSEAL FRACTURE FIXATION

    … internal fixation procedures that involve use of metallic plates for providing mechanical support to the fracture site. However, these methods involve complex surgical procedures and have a high complication rate of 36% and 24% for upper and lower extremities respectively(3,4). Furthermore, these …

    jhu Repository record for DEVELOPMENT AND PERFORMANCE EVALUATION OF BONE ADHESIVE FOR METAPHYSEAL FRACTURE FIXATION (opens in a new tab)

  9. Design of robust scalable anti-icing metallic surfaces

    … an alternative, here I suspend sparsely confined metallic sheets and tailor the surface buckling instability, resulting in ice adhesion strengths on par with these prior strategies but without the use of any coatings. These Buckling Elastomer-like Anti-icing Metallic Surfaces, or BEAMS, exhibit …

    ubc Repository record for Design of robust scalable anti-icing metallic surfaces (opens in a new tab) Download PDF for Design of robust scalable anti-icing metallic surfaces (opens in a new tab)

  10. Acoustic Emission Beamforming for Detection and Localization of Damage

    … and materials. These materials include advanced metallics and composite systems. The exploration and implementation of new materials and structures has prompted the development of numerous structural health monitoring and nondestructive evaluation techniques for quality assurance purposes and …

    washington Repository record for Acoustic Emission Beamforming for Detection and Localization of Damage (opens in a new tab)

  11. Characterization and Control of Electrostatically Assisted Two-Fluid Coaxial Atomization

    … coaxial nozzle enclosed between two large metallic plates held at a high electric potential. Atomization of an electrolyte solution revealed a combination of aerodynamic and electrostatic breakup mechanisms. For momentum ratios much lower than the electric Euler number, electrostatic …

    washington Repository record for Characterization and Control of Electrostatically Assisted Two-Fluid Coaxial Atomization (opens in a new tab)

  12. Advanced Composites for Design and Rehabilitation of Hydraulic Structures

    … materials/systems were applied on sand blasted metallic plates in order to perform comparative abrasion tests using TABER reciprocating abrader. Among six different coating systems, ceramic composite based coatings provided better performance (up to twice or better) over the conventional …

    wvu Repository record for Advanced Composites for Design and Rehabilitation of Hydraulic Structures (opens in a new tab)

  13. Experimental and Analytical Estimation of Damping in Beams and Plates with Damping Treatments

    … in engineering structures, especially beams and plates with passive damping treatments. In structural design and/or optimization, knowledge about damping is essential. However, due to the complexity of the dynamic interaction of system components, the determination of damping, by either analysis …

    ku Repository record for Experimental and Analytical Estimation of Damping in Beams and Plates with Damping Treatments (opens in a new tab)

  14. Damage Detection with an Integrated Smart Composite using a Magnetostriction-based Nondestructive Evaluation Method: Integrating Machine Learning for Prediction

    … polymers (CFRPs) are lightweight alternatives to metallic plates; thus, their usage has increased in performance industries such as aerospace and automotive. Additive manufacturing (AM) has experienced a similar growth as composite material inclusion because of its advantages over traditional …

    clemson Repository record for Damage Detection with an Integrated Smart Composite using a Magnetostriction-based Nondestructive Evaluation Method: Integrating Machine Learning for Prediction (opens in a new tab)

  15. Nonlinear resonant piezoelectric actuators for turbulence manipulation

    … to create resonant oscillations of fully clamped metallic plates which later-on built a moving-wall aligning smoothly to an airfoil surface for wind tunnel investigations. Resonant operation offers an energy efficient route while the induced geometric nonlinearity maximizes the operational …

    freiburg-diss Repository record for Nonlinear resonant piezoelectric actuators for turbulence manipulation (opens in a new tab)

  16. Guided Wave Based Integrated Structural Health Monitoring and Nondestructive Evaluation

    … of detecting damage in simple structures such as metallic plates and pipes. However, there remain many challenging tasks for quantifying damage, especially for damage quantification in complex structures such as laminated composites and honeycomb sandwich structures. Moreover, guided wave …

    south-carolina Repository record for Guided Wave Based Integrated Structural Health Monitoring and Nondestructive Evaluation (opens in a new tab)

  17. Seismic Performance Design Criteria of Existing Bridge Bent Plastic Hinge Region and Rapid Repair Measures of Earthquake Damaged Bridges Considering Future Resilience

    … The adopted concept is to utilize U-shaped metallic plates as externally attached ductile fuses to be anchored to the non-damaged part of the column, hence bypassing the damaged zone to restore the lateral capacity. The damaged zone can then be repaired with strips of fiber-reinforced …

    portland-state Repository record for Seismic Performance Design Criteria of Existing Bridge Bent Plastic Hinge Region and Rapid Repair Measures of Earthquake Damaged Bridges Considering Future Resilience (opens in a new tab)

  18. Reconfigurable Low Profile Antennas Using Tunable High Impedance Surfaces

    … from 2.42 GHz to 2.66 GHz using overlapping metallic plates instead of a continuous ground plane. The bending test results demonstrated that, by placing cuts on the ground plane or using overlapping metallic layers that resemble fish scales, it was possible to create highly conductive …

    usf Repository record for Reconfigurable Low Profile Antennas Using Tunable High Impedance Surfaces (opens in a new tab)

  19. Μελέτη των μορφολογικών και χημικών αλλοιώσεων των μικροπλακών οστεοσύνθεσης τιτανίου και συσχέτισή τους με τα ιστολογικά ευρήματα των πέριξ ιστών

    … and evaluate findings on titanium osteosynthesis plates and adjacent tissues retrieved from the maxillofacial area. 65 patients with an age of 2-55 years (mean 18.2 years, SD: 12.4), who had undergone maxillofacial surgery participated in the study. From these patients 123 commercially pure …

    greece Repository record for Μελέτη των μορφολογικών και χημικών αλλοιώσεων των μικροπλακών οστεοσύνθεσης τιτανίου και συσχέτισή τους με τα ιστολογικά ευρήματα των πέριξ ιστών (opens in a new tab)