Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 34 for “"Metallizing."”.

  1. Repair/strengthening of steel angles using thermal spray metallizing

    … have been conducted on the use of thermal spray metallizing coatings on metallic substrates. This technique is widely used for corrosion and wearing protection. In this research program, the effectiveness of the thermal spray metallizing technique was examined as a means of repairing corroded …

    manitoba Repository record for Repair/strengthening of steel angles using thermal spray metallizing (opens in a new tab)

  2. Closed-Loop Control of Surface Preparation for Metallizing Fiber-Reinforced Polymer Composite

    To improve the surface properties of fiber-reinforced polymer composites, one method is to employ thermal spray to apply a coating on the composite. For this purpose, it uses a metal mesh serving as an anchor between the composite and the coating to increase adhesion. However, the metal mesh is …

    concordia Download PDF for Closed-Loop Control of Surface Preparation for Metallizing Fiber-Reinforced Polymer Composite (opens in a new tab)

  3. Electrochemical Investigation of Corrosion Resistance of Weldments in Steel Bridges

    … systems (3-coat, Calcium sulfonate alkyd, and metallizing coating) in steel bridges were deposited on the bridge steels. Test results revealed that the bridge steel welds exhibit higher corrosion initiation over base metals, regardless the types of steel or coating. The protective coating …

    ndsu Repository record for Electrochemical Investigation of Corrosion Resistance of Weldments in Steel Bridges (opens in a new tab)

  4. Effects of Geometric Variations on the Performance of Fused Filament Fabricated S- and C- Band Horn Antennas

    … with polymer materials and subsequently metallizing the surface, antennas can be made more cost effectively and lighter weight. Horn designs can be readily modified with AM techniques to include appropriate mounting features which are typically not included in most off-the-shelf horn …

    ku Repository record for Effects of Geometric Variations on the Performance of Fused Filament Fabricated S- and C- Band Horn Antennas (opens in a new tab)

  5. Three-dimensional Micron-scale Metal Photonic Crystals Via Multi-photon Direct Laser Writing And Electroless Metal Deposition

    … structure and form. MPCs were then created by metallizing the polymeric PCs via wet-chemical electroless deposition. The electromagnetic properties of the polymeric PCs and the metallized structures were characterized using Fourier transform infrared spectroscopy. It is shown that metallization …

    ucf Repository record for Three-dimensional Micron-scale Metal Photonic Crystals Via Multi-photon Direct Laser Writing And Electroless Metal Deposition (opens in a new tab)

  6. MULTILAYER ELECTRONIC STRUCTURES PRODUCED BY ADDITIVE CODEPOSITION OF METAL AND CERAMIC

    … Direct ink writing has received attention for metallizing electronic substrates because the printing can be performed on low-cost equipment. The biggest challenge in direct ink writing is in the ink itself. Printing on electronic substrates typically requires pressure less sintering, and many …

    maryland Repository record for MULTILAYER ELECTRONIC STRUCTURES PRODUCED BY ADDITIVE CODEPOSITION OF METAL AND CERAMIC (opens in a new tab)

  7. Interfacial reduction phenomena in self-reducing reactive silver ink systems

    … these insights was demonstrated with a study on metallizing thermally-sensitive silicon heterojunction (SHJ) solar cells with reactive silver inks. Printing directly onto heated cells and utilizing low vapor pressure complexing agents achieved silver fingers with resistances only 1.9× higher than …

    colo-mines Repository record for Interfacial reduction phenomena in self-reducing reactive silver ink systems (opens in a new tab)

  8. Predicting and Prolonging the Service Life of Weathering Steel Highway Structures

    … been assessed in a cyclic corrosion test: a zinc metallizing, an aluminum-zinc-indium alloy metallizing, and a zinc tape with a PVC topcoat. All these coatings are designed to act not just as barriers, but also as sacrificial anodes. The test was run for 212 24-hr cycles, over the course of which …

    waterloo Repository record for Predicting and Prolonging the Service Life of Weathering Steel Highway Structures (opens in a new tab)

  9. The creative exploitation of electrodepositing metals onto glass

    … of rendering the glass conductive known as metallizing are examined and evaluated in order to assess the feasibility of obtaining true adhesion (defined as an independent and tenacious bonding between the metal and the glass, although it is a conclusion of this research that …

    wlv Repository record for The creative exploitation of electrodepositing metals onto glass (opens in a new tab) Download file for The creative exploitation of electrodepositing metals onto glass (opens in a new tab)

  10. Nanocomposite and Soluble Energetic Additives for Burning Enhancement of Hydrocarbon Fuels

    Metallizing liquid fuels and propellants to improve performance of energy conversion and propulsion systems has been of interest for decades but past attempts to do so using micron-sized metal powders demonstrated inefficient combustion and low burning rates of modified hydrocarbons. “Nanofuels” …

    maryland Repository record for Nanocomposite and Soluble Energetic Additives for Burning Enhancement of Hydrocarbon Fuels (opens in a new tab)

  11. The design and testing of dielectric-loaded linear electron accelerator structures

    … by grinding the rims to a fine finish and metallizing them with copper. Surface breakdown can be inhibited by coating the discs with a thin protective layer of lead borate glaze or P.T.F.F. Electron multipactor resonances between discs are largely avoided by excluding oil from the evacuated …

    oxford Repository record for The design and testing of dielectric-loaded linear electron accelerator structures (opens in a new tab)

  12. Pyrolysis of 3D Printed Photopolymers: Characterization and Process Development

    … of pyrolyzed SLA and 2PP 3D printed parts. Metallizing these pyrolyzed samples showed to increase both the electrical conductivity and ultimate strength of both pyrolyzed photopolymers. Lastly, I looked at increasing the stiffness of the pyrolyzed photopolymers through the addition of hBN …

    maryland Repository record for Pyrolysis of 3D Printed Photopolymers: Characterization and Process Development (opens in a new tab)

  13. Chemical Templating by AFM Tip-Directed Nano-Electrochemical Patterning

    … circuit elements on the surface by selectively metallizing the templates to form local wiring. AFM tip-directed nano-oxidation was selected as the method for patterning to create chemical templates. This project demonstrates new techniques for creating, continuous metallization of, and DNA …

    byu Repository record for Chemical Templating by AFM Tip-Directed Nano-Electrochemical Patterning (opens in a new tab) Download PDF for Chemical Templating by AFM Tip-Directed Nano-Electrochemical Patterning (opens in a new tab)

  14. Metallization of Carbon Fibre Reinforced Composites by Lay-up on Cold Sprayed Coatings and by GRIP Metal™ as Bond Coat for Cold Spray

    … two potential alternative methods for metallizing, thus protecting CFRC against erosion and lightning strikes. The first approach features the use of a lay-up technique referred to as “Reverse Lay-up Method”. The objectives of this approach were, first, to develop a reliable demoulding …

    ottawa-retro Repository record for Metallization of Carbon Fibre Reinforced Composites by Lay-up on Cold Sprayed Coatings and by GRIP Metal™ as Bond Coat for Cold Spray (opens in a new tab)

  15. Synthesis and fabrication of nanostructured materials and surfaces

    … method consists of a seeding step and a metallizing step. In the seeding step, the glutaraldehyde is shown to direct the growth of the gold seeds, which are formed on the glutaraldehyde polymer. Within our knowledge, this is the first report on the synthesis of gold nanowires using this …

    iastate Repository record for Synthesis and fabrication of nanostructured materials and surfaces (opens in a new tab)

  16. MEMS based voltage references

    … AC reference. The capacitor electrodes required metallizing which could not be manufactured using the existing processes. Hence a new silicon-on-insulator (SOI) manufacturing process utilising low temperature fusion bonding was developed. The stability of the AC voltage reference presented in …

    aalto Repository record for MEMS based voltage references (opens in a new tab)

  17. The electrochemical deposition of mercury on glassy carbon electrodes : a thesis in partial fulfilment of the requirements for the degree of Masters in Science in Chemistry at Massey University, Palmerston North, New Zealand

    The mechanism for the reduction of Hg2+ on glassy carbon in aqueous acetate and nitrate electrolyte was studied. This deposition process is of interest due to the wide electroanalytical applications of mercury thin film electrodes. It was found in the early stages of this work that even though the …

    massey Repository record for The electrochemical deposition of mercury on glassy carbon electrodes : a thesis in partial fulfilment of the requirements for the degree of Masters in Science in Chemistry at Massey University, Palmerston North, New Zealand (opens in a new tab)

  18. Electroplating approach based on self-passivated aluminium masking for metallization of silicon heterojunction solar cells

    … of a new electroplating approach applied for metallizing copper contacts on bifacial silicon heterojunction (SHJ) solar cells. SHJ solar cells present one popular cell design that enables the highest conversion efficiency, to date for silicon-based photovoltaic (PV). Contact metallization is …

    freiburg-diss Repository record for Electroplating approach based on self-passivated aluminium masking for metallization of silicon heterojunction solar cells (opens in a new tab)

  19. Fabrication and Evaluation of Boron-Doped CVD Diamond Microelectrodes

    The electrochemical behavior of boron-doped diamond microelectrodes has been studied in acetonitrile solutions containing two redox couples using cyclic voltammetry. One test system is 1-2.5 mM ferrocene, containing 0.1 M Tetrabutyl ammonium hexafluorophosphate (TBAH). This well-known reversible …

    odu Repository record for Fabrication and Evaluation of Boron-Doped CVD Diamond Microelectrodes (opens in a new tab)

Page 1 of 2