Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 29 for “"Metallurgical analysis"”.
-
Experimental and metallurgical analysis of the friction stir forming process
The automotive industry requires numerous joints in light dissimilar materials. Since the automotive industry, as well as many others, is in need of improvements in this area, this project is focused on developing a new process that joins dissimilar materials with maximum strength conceivable by in …
-
Experimental and metallurgical analysis of friction stir forming (FSF) of steel onto steel by low axial force
Friction Stir Forming (FSF) is a solid-state joining process inspired by Friction Stir Welding (FSW). In FSF, a rotating non-consumable tool generates frictional heat between a workpiece and a backing plate, softening the material below its melting temperature and enabling bonding through severe …
-
Welding simulation of steels welded with low transformation temperature (LTT) filler materials
… heat flux is performed. First a repeated analysis of a single pass weld is performed to validate Abaqus as a good simulation software for welding simulation. Then a heat transfer analysis of a plate with 3 pass of weld is performed. Two different heat source models are used and compared. …
-
Perturbed Angular Correlations - 152Sm and 152Gd
… <p> Samples of the alloys were analysed metallurgically. After chemical treatment and microscopic examination the presence of inclusions was detected. Electron microprobe examinations indicated that the inclusions were europium. The metallurgical analysis confirmed the doubts raised by …
-
The improvement of wear characteristics of aluminum through the addition of silicon via laser processing
… Performance was evaluated and ranked through metallurgical analysis and bench wear testing. Once an optimal precursor was chosen, limited duration testing was conducted on a 13 cubic inch aluminum air-cooled single cylinder to demonstrate performance in an engine environment and compare to …
-
The design, fabrication, and testing of a centrifuge for laser materials processing under enhanced gravity conditions
… at 2g<sub>e</sub> intervals. Post-process metallurgical analysis was performed to determine the shape of the weldment.</p> <p>The results of the experimental data indicate that gravity seems to play a slight role in the size and shape of partial penetration welds; however, differences …
-
Fatigue Behaviour of Forged Ti-6Al-4V Made From Blended Element Powder Metallurgy
A detailed metallurgical analysis was conducted to correlate microstructure to axial strain-controlled high cycle fatigue of Ti-6Al-4V forgings made from cold isostatic pressed and sintered preforms of blended element powder metallurgy (BEPM) incorporating hydrogenated titanium. Analysis included …
-
The Effect of Volatile Fission Products on Fuel Motion in Nuclear Fuel Elements
… nuclear reactor operation require an in-depth analysis of the phenomena associated with postulated reactor core overheating accidents. One aspect of nuclear reactor safety assessment is a prediction of fuel behavior associated with such postulated overheating events, which includes an …
-
The Effects of the Punching Process Upon the Magnetic Properties of Steel Laminations
… test rig and an on-line digital computer. A metallurgical analysis of the material is made so as to obtain the optimum temperature for annealing and also to assist in determining the extent of the plastic deformation. The deformation of the punched edge is also examined in terms of its …
-
Modelo Termo-mecânico-metalúrgico de chapa de aço naval DH36 soldada com MAG/John
… the welded structures. From a thermo-mechanicalmetallurgical numerical model sequentially coupled, developed in a finite element program, the thesis contributes proposing methods that will aid in the study of the influence of metallurgical analysis on residual stresses and deformations in a …
-
How did the iron industry from the Iron Age to the Roman Period in Southern Britain?
… the smelting process. Not just on a purely metallurgical level but also revealing some of the actions of the smelters. The transition from the Iron Age to the Roman period has been a longstanding area of discussion in European archaeology, marking the change from prehistory to protohistory. …
-
A Medieval tale: Saxons, Normans and the telscombe ring
… is twofold: first, complete detailed visual and metallurgical analysis to shed light on its use, composition and construction and to identify the makers design intent and production method; second, a comparative stylistic review within a compendium of medieval rings found in England and an array …
-
Bronze Age tin-bronze metalwork assemblages in Kent: Composition, distribution and context
… corpus of research, followed by Distribution, Analysis, Assemblages in Retrospect and Current Thinking, Discussion and a Conclusion. The Discussion focuses on context of assemblages and metalworking from the subject area and the Bronze Age in northern Europe. The Conclusion draws largely on the …
-
Wear and microstructural integrity of ceramic plasma sprayed coatings
… or splat, dimensions, using techniques of metallurgical analysis and electron microscopy. The coatings were then evaluated using a series of micromechanical techniques, including indentation, controlled scratch testing, abrasion and dry particle erosion, to investigate their response to …
-
The identification and modelling of the dominant failure mode in hot forging tooling
… The investigation made use of finite element analysis, metrology, metallurgical analysis and thermal measurement. The dominant failure mode was associated with the plastic deformation of the tooling. Testing was performed to gather sufficient data to allow for the development of a lifing …
-
Penetration of a shaped charge
… obstacle, such as a membrane or beam. Finally, metallurgical analysis and hydrocode runs are presented. Unresolved issues are discussed and suggestions for further work are presented.
-
The Typology and Use of Staff Weapons in Western Europe c. 1400 – c. 1550
… objects. Non-destructive experimentation and metallurgical analysis are used to analyze technical characteristics of staff weapons that have hardly been considered in previous scholarship. The overall aim of this thesis is to create a typology that can be used as a reference point for future …
-
Monetary expansion in Britain in the late twelfth century
… investigation by die-study to provide the first analysis of the structure and internal chronology of the coinage, which is prerequisite to understanding the extent of the monetary expansion.</p> <p>The thesis provides the first investigation of the alloy of late twelfth-century coins using …
-
StarJet printheads for printing molten solder jets at 320 °C and molten aluminum alloy droplets at 950 °C
… aluminum alloys at up to 950 °C<br>and the metallurgical analysis of printed metal droplets are presented. The StarJet technology is based on an interchangeable nozzle chip that features a star-shaped orifice which confines droplets and jets in the orifice by capillary forces before they are …
-
Investigation of the possible application of certain chemicals to sulfide flotation, An
Includes bibliographical references.
Page 1 of 2