Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 80 for “"Metals Fatigue"”.
-
Influence of the Biaxiality Ratio on Multiaxial Fatigue of Metallic Materials
The ability to model and predict multiaxial fatigue life without being too aggressive or conservative is of great interest to engineers. The purpose of this study was to examine the influence of the biaxiality ratio (σ2/σ1) on the multiaxial fatigue life of ductile metals. Fatigue models may …
-
Correlation of elevated fatigue data
Electronic Thesis
-
A study of the mode of fatigue fracture in annealed and burnished copper
Thesis (M.S.)--Michigan State University. Dept. of Metallurgy, Mechanics & Materials Science, 1962
-
On couple stress in the mechanics of materials
… be clouded by inhomogeneity and anisotropy of metals at the microstructural level. The results represent the only known experimental data at the time of publication dealing with couple stress in metals and would seem to be the next obvious step in the development of the theory which has …
-
Modeling cycle and time dependent creep/relaxation effects on fatigue lives of notched members
… strain amplitude is a well-known occurrence for metals even at room temperature. Many fatigue analysis procedures ignore these variations. Fatigue analysis which included both time and cycle dependent mechanical material behavior for metals at room temperature had not been previously studied …
-
A criterion of thermal fatigue failure of 304 stainless steel
Electronic Thesis
-
RELIABILITY ANALYSIS OF SERIES STRUCTURAL SYSTEMS (PROBABILITY, DESIGN, FATIGUE).
… with emphasis on problems typical for metal fatigue is addressed. Specific goals include the following: (1) Given the distribution of strength of the components and the distribution of external loads on the system what is the probability of failure of the system? (2) Given the target safety …
-
An experimental determination of the stress-strain rate relations of several metals
Thesis (Ph. D.)--Michigan State University of Agriculture and Applied Science. Department of Applied Mechanics, 1960
-
An experimental study of fatigue crack growth from fastener holes repaired by coldworking
Thesis (M.S.) - Michigan State University. Department of Metallurgy, Mechanics, and Material Science
-
Analysis of friction behavior of coated sheet steel using the bending under tension test
Includes bibliographical references.
-
The Design of a Six Specimen Tensile Fatigue Machine
Although metal fatigue has been recognized for many years and during that time many persons have tried to find the explanation for it, there is still not a complete theory concerning this phenomenon. Metal fatigue is one of the major problems the modem designer must face. If the design techniques …
-
A Literature Review Covering the Effect of Residual Stresses on Fatigue Strength of Steel
Fatigue fracture usually is defined as the failure of a part at a stress below its breaking stress due to repetitive loading conditions. It is now a well known fact that a part, designed for a maximum stress well below the yield point of the material, may be very apt to fail under cyclic loading …
Page 1 of 4