Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 99 for “"Metastable phase"”.
-
METASTABLE PHASE FORMATION AND MATERIALS DISCOVERY IN COMPLEX OXIDE THIN FILMS VIA LASER SPIKE ANNEALING
… and stabilize ambient quenched non-equilibrium metastable phases. These phases often have distinct structures and properties, dramatically expanding the materials space available for applications. One such technique is Laser Spike Annealing (LSA), where a scanned laser over a thin-film material …
-
A crystallization study of Zr-Ni metallic glass in the range 55-71 atomic percent zirconium
… for the occurrence of a previously unreported metastable phase between 57 and 63.5 at. % Zr. Micrographs of the first crystals which form as a function of composition within the range of this study show different morphologies corresponding to the two equilibrium phases (ZrNi and Zr2Ni) and the …
-
Thermal Properties of Indium Nanoparticles and Gold Silicide Formation by Scanning Nanocalorimetry
The silicide study focuses on phase formation in Au-Si thin films. The unique finding is to determine the melting temperature of metastable phase using calorimetry, which is ∼60°C below the eutectic melting point (363°C). The heat of fusion (26.4 kJ/mol) of the metastable phase has also …
-
Fractional Recovery of Minerals from Waste Brines by Utilizing Metastable Solution Kinetic Behaviours
… be possible by investigating the non-equilibrium phase behaviour and phase changing kinetics in multi-ion saline systems which cannot be predicted from widely reported phase boundaries. The overall objective of this thesis was therefore to further the knowledge of the linkage between precipitation …
-
The fatigue properties of pressure diecast zinc-aluminium based alloys
… was also found to influence and maintain the metastable Zn-Al (αm) phase. The copper free Mazak3 upon ageing lost this metastable phase. The 1.0% copper ZA8 alloy had lost almost 50% of its metastable phase. Finally the 2.0% copper ZA27 had merely lost 10% of its metastable phase. The cph zinc …
-
Calcium Carbonate Scale Formation under Multiphase Turbulent Conditions
Crystallization in multiphase systems is one of the major problems that is encountered during oil processing and oil transporting processes. In the petroleum industry oil and water are produced and transported together and this causes mixing of oil and water which may result in different flow …
-
Light scattering on the high-temperature superconductors
… scattering in several limits: the insulating phase, the normal and superconducting state of the superconducting phase, and an optically induced metastable phase. In all cases, the analysis and proposed phenomenological models involved either an examination of the inelastic background …
-
HIGH THROUGHPUT SCREENING OF STRUCTURAL EFFECTS OF MILLISECOND TIME SCALE THERMAL ANEALING
The equilibrium phase of a material is only one of many structures that can potentially form. As structure plays the critical role in determining many material properties, accessing these non-equilibrium metastable phases can dramatically expand the design space of materials. While metastable …
-
Gamma Phase MgH2 Induced by Ultra-high Pressure For Low Temperature Dehydrogenation
A metastable phase of magnesium hydride was prepared and investigated for solid state hydrogen storage. The magnesium hydride has a high theoretical hydrogen storage capacity (7.6 wt.%) but also a high dehydrogenation temperature of more than 300˚C due to its high enthalpy. Its metastable phase …
-
A supercooled study of nucleation and symmetries
Nucleation is the process by which a metastable phase decays into a stable phase. It is widely observed in nature, and is responsible for many phenomena such as the formation clouds and domains in crystalline solids. The classical theory of nucleation predicts that the objects that initiate the …
-
On the formation and decomposition of zinc ferrite under sintering conditions
… than zinc ferrite but, for kinetic reasons a metastable phase of zinc ferrite was formed more readily.
-
Rapid solidification of Ni-Si-Fe intermetallics in drop tube
… DTA and XRD. For the Ni-25.3 at.% Si alloys, the metastable phase Ni25Si9 formed as the dominant phase in all size ranges of the particles, with γ-Ni31Si12 and β1-Ni3Si also being present. Three typical microstructures were observed: (1) regular lamellar and (2) anomalous eutectic structures …
-
Synthesis diamond films from low pressure chemical vapor deposition
… plasmas to assist the deposition of the diamond metastable phase of carbon were used. Discussed in the following thesis are the plasma configurations used together with experimental parameters such as gas composition, flow rate, chamber pressure, and power. The crystallinity of the films, which …
-
Aluminum Beryllium Composites Produced by Rapid Solidification (Metastable Equilibrium, Modulus Hardening, Liquid Immiscibility)
… solidified microstructures; equilibrium cph and metastable bcc. A cubic lattice parameter of 0.25 (+OR-) 0.02 nm was experimentally determined by electron diffraction for the metastable bcc Be. A mechanism for the formation of the microstructure was described by a metastable phase diagram …
-
Understanding formation of metals and alloys in solution with in situ characterizations
Phase diagrams are the maps for the design and synthesis of functional materials. However, the bulk phase diagrams oftentimes become not predictive in the synthesis of nanoparticles owing to the significant contribution of surface energy to the total energy. Synchrotron X-ray diffraction (XRD) is a …
-
Al-Ce-Mn Solidification Phase Selection and Solid-State Phase Transformations
… at high temperatures, where the silicon phase coarsens readily. Therefore, efforts have been made to design new Al alloys that can take advantage of the AM processing. The goal of new alloys is to optimize based on rapid solidification conditions, while being less prone to processing …
-
Equilibrium and metastable solidification in Ti-Al-Nb and Al-Ni systems
… observations of equilibrium liquid-solid phase transformations, as well as non-equilibrium solidification from the undercooled melt, are performed by combination of in situ structural studies using high-energy X-rays at a synchrotron source and the electromagnetic levitation technique. …
-
The Role of Misfit Strain and Oxygen Content on Formation and Evolution of Omega Precipitate in Metastable Beta-titanium Alloys
… high hardenability, and low elastic modulus. The phase transformations in β-Ti alloys are rather complex due to formation of metastable phases during various thermo-mechanical treatments. One such critical metastable phase, the hexagonal omega (ω) phase, can form in β-Ti alloys under quenching …
-
The effect of rapid solidification upon eutectic formation of Sn-Ag and Ag-Cu alloys
… was identified as the primary solidification phase at all cooling rates, rather than proeutectic Ag₃Sn as predicted by the equilibrium phase diagram. The volume fraction of the interdendritic eutectic decreased with increasing cooling rate, while the Ag concentration in the residual liquid was …
-
One-Dimensional Gas Dynamics in Nitrous Oxide Rocket Systems
… picture of BLEVE will be described here as a metastable phase transition between liquid and vapor phases, using Clausius II thermodynamics (statics) to describe the retrograde behavior of the fluid. The dynamics of a hypothetical BLEVE process inside nitrous rocket-propellant tanks will also …
Page 1 of 5