Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 22 for “"Method of Weighted Residuals"”.

  1. Time integration of unsteady transonic flow to a steady state solution by the finite element method.

    A finite element method was applied to the unsteady transonic small disturbance equation and integrated until the solution converged to the steady state for a thin nonlifting airfoil. The method of weighted residuals was used to formulate the finite element equations, and Houbolt's method of …

    nps Repository record for Time integration of unsteady transonic flow to a steady state solution by the finite element method. (opens in a new tab)

  2. EFFECT OF AXIAL DEFORMATION ON BEHAVIOUR OF FRAME-CORE WALL BUILDINGS

    The Galerkin method of weighted residuals is employed for the analysis of' coupled frame-core wall buildings under lateral loads. The governing equations are formulated through the continuum approach idealizing the structure as a shear-flexure cantilever. The effect of axial deformation is …

    nus Repository record for EFFECT OF AXIAL DEFORMATION ON BEHAVIOUR OF FRAME-CORE WALL BUILDINGS (opens in a new tab) Download file for EFFECT OF AXIAL DEFORMATION ON BEHAVIOUR OF FRAME-CORE WALL BUILDINGS (opens in a new tab)

  3. A nonlinear diffusion theory model for xenon-induced flux oscillations

    … power plants. The model is based on Galerkins' method of weighted residuals applied to multigroup diffusion theory. A similar linear model is developed by the same methods in order to consider the effects of the nonlinearities of the system. The effects of multi- and single-energy group …

    vt Repository record for A nonlinear diffusion theory model for xenon-induced flux oscillations (opens in a new tab)

  4. First steps in development of a translational non equilibrium model using maximum entropy principle

    … elaborates the steps taken in the development of a model for flows that are in translational non-equilibrium. The backbone of the model relies on Boltzmann equation for gases as a starting point. Three mathematical tools - domain decomposition, moment methods similar to method of weighted …

    uiuc Repository record for First steps in development of a translational non equilibrium model using maximum entropy principle (opens in a new tab)

  5. The application of feedforward artificial neural networks to function approximation and the solution of differential equations

    The increasing use of artificial neural networks and other connectionist systems in engineering, and the advantages obtained from that use, motivated the development of an approach wherein a single or multiple input feedforward artificial neural network with piecewise linear hard limit transfer …

    rice Repository record for The application of feedforward artificial neural networks to function approximation and the solution of differential equations (opens in a new tab)

  6. Two-dimensional modeling of flow and sedimentation

    … Free surface movement is handled with the help of Arbitrary Lagrangian Eulerian Method. $k - \epsilon$ closure is employed to determine the turbulent eddy viscosity. Spatial discretization is done using linear 3-noded triangular elements. Galerkin method of weighted residuals is used to obtain …

    rice Repository record for Two-dimensional modeling of flow and sedimentation (opens in a new tab)

  7. Analysis of unsteady-state heat conduction in a cylinder with the finite element method

    <p>Unsteady-state heat conduction in a cylinder of finite dimensions with constant physical and thermal properties was analyzed with the finite element method. Symmetry of the cylinder and application of Newman's method reduced the problem to two independent one-dimensional problems. Finite element …

    njit Repository record for Analysis of unsteady-state heat conduction in a cylinder with the finite element method (opens in a new tab)

  8. Solution of non-linear partial differential equations with the Chebyshev Spectral method

    The Spectral method is a powerful numerical technique for solving engineering differential equations. The method is a specialization of the method of weighted residuals. Trial functions that are easily and exactly differentiable are used. Often the functions used also satisfy an orthogonality …

    vt Repository record for Solution of non-linear partial differential equations with the Chebyshev Spectral method (opens in a new tab)

  9. Aspects of simulation for distributed parameter process : the autothermal tubular reactor with internal countercurrent heat exchange

    <p>A detail simulation of a complex nonlinear distributed parameter industrial process implemented with CSMP(Continuous System modeling Program) is presented. The ARICHE (Autothermal Reactor with Internal Countercurrent Heat Exchange) carrying out the catalyzed water-gas shift reaction is the …

    ut-knoxville Repository record for Aspects of simulation for distributed parameter process : the autothermal tubular reactor with internal countercurrent heat exchange (opens in a new tab)

  10. Investigation of Zinc Oxide Nanowires for Impedance Based Structural Health Monitoring

    The goal of this work is to investigate the piezoelectricity of composite laminates embedded with layers of zinc oxide (ZnO) nanowires. ZnO nanowire embedded composites have the potential to sense and actuate giving the potential for these smart composites to serve the function of being load …

    vt Repository record for Investigation of Zinc Oxide Nanowires for Impedance Based Structural Health Monitoring (opens in a new tab)

  11. A weighted residual approach for solving a one-dimensional inverse solidification design problem involving a pure melt

    … a par-ticular solidification process. Knowledge of this motion is important since it is well known that the interfacial motion is directly related to the quality of the casting. This problem involves the determination of an unknown time-dependent boundary condition that produces a prescribed …

    ut-knoxville Repository record for A weighted residual approach for solving a one-dimensional inverse solidification design problem involving a pure melt (opens in a new tab)

  12. Heat flow in the melt and crucible for crystal growth

    … growth to control fluid flow. The influence of an applied magnetic field on heat transfer in a germanium melt has been investigated in this work. In heat-transfer modelling of the Czochralski process, values of thermal conductivity of the crucible material, pyrolytic boron nitride, are …

    ubc Repository record for Heat flow in the melt and crucible for crystal growth (opens in a new tab) Download PDF for Heat flow in the melt and crucible for crystal growth (opens in a new tab)

  13. On Multifunctional Collaborative Methods in Engineering Science

    … and structures. Integrated high-fidelity methods with diverse engineering applications provide the enabling technologies to assimilate these high-fidelity, multi-disciplinary data rapidly at an early stage in the design. These integrated methods must be multifunctional, collaborative and …

    odu Repository record for On Multifunctional Collaborative Methods in Engineering Science (opens in a new tab)

  14. Reduced-order modelling of electrohydrodynamic flows on a circular cylinder

    … concerns the theoretical modelling and analysis of a two-dimensional film of a perfectly conducting Newtonian liquid coating a uniformly rotating horizontal cylindrical electrode. The system is enclosed by a concentric outer electrode, with the electric potential difference between the inner and …

    strathclyde Repository record for Reduced-order modelling of electrohydrodynamic flows on a circular cylinder (opens in a new tab)

  15. Reduced-order modelling of fluid flows using analytical and numerical methods

    Coating the exterior of a cylinder with a layer of fluid is a fundamental problem in fluid mechanics and occurs in numerous natural processes and industrial applications, such as heat and mass transfer and the production of orthopaedic implants. This thesis formulates and analyses novel models for …

    strathclyde Repository record for Reduced-order modelling of fluid flows using analytical and numerical methods (opens in a new tab)

  16. The effect of rib attachment properties on structural acoustics

    <p>Sound Pressure measurements were taken of several 2.44m long thin beams which had 0.635cm wide t-ribs centered on them. The beams were excited by a chirp signal with the frequency range of 500Hz to 1500Hz. Two rib attachment methods were used on the beams. One group of beams were machined out of …

    iastate Repository record for The effect of rib attachment properties on structural acoustics (opens in a new tab)

  17. Determination of Hydraulic Properties With Point Source Experiments

    … a surface point source using the Galerkin method of weighted residuals and the mixed formulation of the Richards' equation. The saturated radius usually formed during a point source test was estimated by the numerical model. Comparisons with published experimental and analytical results …

    arizona-thes Repository record for Determination of Hydraulic Properties With Point Source Experiments (opens in a new tab)

  18. A finite element solution of Pucher's Equation

    <p>The purpose of this investigation was to find an approximate solution to Pucher's Equation (second order, nonhomogeneous partial differential equationwith variable coefficients) by the finite element method and to compare these results withother numerical and exact solutions. It was intended to …

    utk-theses Repository record for A finite element solution of Pucher's Equation (opens in a new tab)

  19. Modeling of Transport Phenomena in Reverse Osmosis Membranes

    … properly design RO units, a good understanding of the fundamentals of the membrane transport is needed; this means that a strong transport model needs to be developed. This research is concerned with the development of such a model. As well, the effects of system pressure, concentration, and …

    mcmaster Repository record for Modeling of Transport Phenomena in Reverse Osmosis Membranes (opens in a new tab)

Page 1 of 2