Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 295 for “"Micro Electro Mechanical Systems"”.
-
Coupled Dynamics Of Thin Micro Electro Mechanical Systems
Microelectromechanical systems (MEMS) combine high levels sensitivity and multifunctionality with small size and low power consumption. The major prime mover for MEMS industry in the past has been automobiles whereas consumer electronics (E.g. iPhones and Nintendo Wii) is the most important sector …
-
Micro electro mechanical systems microphone-design and process development
… thesis is a quest to design and fabricate a MEMS microphone. The investigations done as part of the thesis not only include the design of the microphone, but the manufacturability challenges and test issues as well. The motive behind covering the breath of issues in this thesis has been driven by …
-
Micro-Electro-Mechanical Systems (MEMS) Integrated Frequency Reconfigurable Antenna
… antenna (PIFA), by the use of radio frequency micro-electro-mechanical system (RF MEMS) switches. This research work has been conducted at the Micro/Nano Electro Mechanical Systems (µN _eMS) Laboratory at Utah State University. In this thesis, two electrically small frequency reconfigurable …
-
Wireless Applications of Radio Frequency Micro-Electro-Mechanical Systems
… frequency spectrum. As a result, reconfigurable systems are of significant importance and research is being conducted in numerous universities. The purpose of this research is to develop novel RF MEMS based reconfigurable wireless systems. By utilizing the RF MEMS switches as a basic building …
-
Remote experimentation testing and characterization of micro electro mechanical systems
… accessible testing and characterization lab for Microelectromechanical Systems. The system is split into three different modes of operation depending on purpose: 1. Remote Full Device Access Lab, 2. Remote Experiments Lab, and 3. MEMS Characterization Lab. In the first two modes of operation, a …
-
Lubrication and Tribological Performance Optimizations for Micro-Electro-Mechanical Systems
Two approaches to solving MEMS tribology problems have been pursued. In the first approach, a direct lubrication method using well-known lubricants such as perfluoropolyether (PFPE) and multiply alkylated cyclopentane (MAC) was developed. Extensive tribological tests using reciprocating sliding and …
-
Investigation and development of ferrofluid enabled micro-electro-mechanical systems
… been limited success in their applications in micro- devices and microactuators in specific. Literature review shows various efforts to develop ferrofluid-based microactuators however, most of them have utilized non-integrated means (e.g. external magnets or solenoids) to provide the necessary …
-
DELAY DIFFERENTIAL EQUATIONS AND THEIR APPLICATION TO MICRO ELECTRO MECHANICAL SYSTEMS
… a crucial role in modeling performance on demand Micro Electro Mechanical Systems (MEMS). We start with the stability analysis of a linear delay model. We also show that in certain cases the delay model can be efficiently approximated with a much simpler model without delay. We proceed with the …
-
Micro Electro Mechanical Systems Integrated Frequency Reconfigurable Antennas for Public Safety Applications
… radiation pattern) using Radio Frequency (RF) Micro Electro Mechanical Systems (MEMS). This is a part of the overall research performed at the RF Micro/Nano Electro Mechanical Systems (μN∈MS) Laboratory at Utah State University, which includes design, microfabrication, test, and …
-
Optical Micro-Electro-Mechanical Systems for Add/Drop Multiplexing and Infrared Spectroscopy
Wide ranging efforts in development of various Micro-Electro-Mechanical (MEM) devices over the past twenty years have created a vast collection of novel devices that can be fabricated in numerous ways. As the MEMS field matures it is important to remember the systems aspect the name implies and …
-
Implementation of a Low Cost Micro Electro Mechanical Systems Inertial Navigation Solution
The purpose of this study is to develop a low cost navigation solution for General Aviation (GA) aircraft and flight testing aircraft. This low cost solution uses a Global Positioning System (GPS) coupled with an Inertial Navigation Solution (INS) to provide a more accurate, stable navigation …
-
Nanoscale Mapping of In-Situ Micro Electro Mechanical Systems with Atomic Force Microscopy
Micro-electro-mechanical-systems (MEMS) are increasingly at our fingertips. To understand and thereby improve their performance, especially given their ever-decreasing sizes, it is crucial to measure their functionality in-situ. Atomic Force Microscopy (AFM) is well suited for such studies, …
-
Use of Instabilities in Electrostatic Micro-Electro-Mechanical Systems for Actuation and Sensing
… to exploit static and dynamic instabilities in electrostatic MEMS to develop new MEMS devices, namely dynamically actuated micro switches and binary micro gas sensors. Models are developed for the devices under consideration where the structures are treated as elastic continua. The electrostatic …
-
Mode I and Mode II Measurements For Stiction Failed Micro-Electro-Mechanical Systems
Among MicroElectroMechanical Systems (MEMS), the most common type of failure is stiction. Stiction is the unintended adhesion between two surfaces when they are in close proximity to each other. Various studies have been conducted in recent years to study stiction. Our research group has shown the …
-
Tribology of self-lubricating SU-8 composites for micro-electro mechanical systems (MEMS) applications
… makes it a potential structural material for micro-fabrication of MEMS devices using the photo-lithography process. However, its poor tribological and mechanical properties are major concerns, if SU-8 has to replace Si, which is the mainstay structural material for making MEMS. Low modulii and …
-
Micro-electro-mechanical Systems (mems) And Agile Lensing-based Modules For Communications, Sensing And Signal Processing.
… dissertation proposes the use of the emerging Micro-Electro-Mechanical Systems (MEMS) and agile lensing optical device technologies to design novel and powerful signal conditioning and sensing modules for advanced applications in optical communications, physical parameter sensing and RF/optical …
-
A conceptual framework for the assessment of the criticality of key failure modes in micro-electro mechanical systems (MEMS) accelerometers
Micro-Electro Mechanical Systems (MEMS) are a fast growing field in microelectronics. MEMS are commonly used as actuators, and sensors with a wide variety of applications in health care, automotives, and the military. The MEMS production cycle can be classified as three basic steps: 1. design …
-
Design, Fabrication, and Characterization of a Thin-Film Nickel-Titanium Shape Memory Alloy Diaphragm for Use in Micro-Electro-Mechanical Systems
Previous work done at Cal Poly has shown that thin-film nickel-titanium (NiTi) can be easily sputtered onto silicon wafers and annealed to create a crystallized shape memory alloy (SMA) film. Initial work on creating devices yielded cantilevers that were highly warped due to thin-film stress …
-
Optimisation topologique de micropoutres en vue de maximiser la tension de pull-in
… of Coupled Problems - Application to Micro Electro-Mechanical Systems"
-
Applications of New Materials Systems and Machine Learning Techniques for compensation and Calibration of MEMS
… stability and calibration accuracy of MEMS (Micro-Electro-Mechanical Systems) devices, particularly focusing on the application of high-performance 4H-SiC (silicon carbide) and AlN (aluminum nitride) in MEMS resonators and gyroscopes. Moreover, the research provides a high-level exploration …
Page 1 of 15