Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 42 for “"Micro ElectroMechanical System"”.

  1. Measurement of the Quality Factor for the Micro Electromechanical System Cantilever Devices by Using Non-Destructive Test Methodology

    … of the reliability and the performance of Micro Electro Mechanical System (MEMS) devices are the most challenging tasks of scientists and engineers. At the same time, there is a need for advance and more complex testing methods determining functional, performance of the MEMS device and to …

    waterloo Repository record for Measurement of the Quality Factor for the Micro Electromechanical System Cantilever Devices by Using Non-Destructive Test Methodology (opens in a new tab)

  2. TWO CANTED MEMS ACOUSTIC SENSORS FOR FINDING DIRECTION IN UNDERWATER

    Micro electromechanical system (MEMS)-based acoustic sensors can be operated in the pressure gradient mode to obtained direction of underwater sound. A single MEMS sensor is unable to resolve left and right ambiguity due to cosine directional response. However, recent measurements carried out in …

    nps Repository record for TWO CANTED MEMS ACOUSTIC SENSORS FOR FINDING DIRECTION IN UNDERWATER (opens in a new tab)

  3. MEMS polymumps-based miniature microphone for directional sound sensing

    … directional sound sensor was fabricated using micro-electromechanical system (MEMS) technology based on the operational principle of Ormia ochracea fly's hearing organ. The fly uses coupled bars hinged at the center to achieve the directional sound sensing by monitoring the difference in …

    nps Repository record for MEMS polymumps-based miniature microphone for directional sound sensing (opens in a new tab)

  4. Experimental and numerical study on flow control using obliquely aligned elements.

    The use of micro-electromechanical system devices (MEMS) have been studied extensively in literature for control of flow separation and transitioning to turbulent flow. However, there is limited information about how obliquely aligned roughness elements affect the boundary layer development and …

    baylor Repository record for Experimental and numerical study on flow control using obliquely aligned elements. (opens in a new tab)

  5. Quantitative Fracture Strength of Lithiated Tin Oxide Nanowires by In-Situ SEM Tensile Experiments

    … was gathered from in situ scanning electron microscope (SEM) mechanical tests using a micro electromechanical system (MEMS) uniaxial tensile testing device. Stress values were calculated from load and displacement data from an inSEM nanoindenter tip while strain values were obtained using …

    rice Repository record for Quantitative Fracture Strength of Lithiated Tin Oxide Nanowires by In-Situ SEM Tensile Experiments (opens in a new tab)

  6. The Pressure Distribution Of Rotating Cylinders Using An Onboard Wireless Data Acquisition System

    … Utilizing commercial-off-the-shelf (COTS) micro-electromechanical system (MEMS) pressure sensors, a high-resolution data acquisition system was developed and integrated into a rotating cylinder model. Compared to traditional approaches, such as slip rings or one-off designs, this method …

    calpoly Repository record for The Pressure Distribution Of Rotating Cylinders Using An Onboard Wireless Data Acquisition System (opens in a new tab)

  7. Gain scheduling of an extended Kalman Filter for use in an attitude/heading estimation system.

    … utilized process dynamics driven by a low-cost Micro-Electromechanical System (MEMS) based Inertial Measurement Unit (IMU). Measurement updates are provided by an external machine-vision infrared tracking system. The gain scheduling approach should be applicable to other sensor types such as …

    umn Repository record for Gain scheduling of an extended Kalman Filter for use in an attitude/heading estimation system. (opens in a new tab)

  8. Piezoelectric bistable buckled beam energy harvester.

    … device design is presented to be created via microfabrication techniques. Such devices have countless applications for powering low-current electrical devices, especially wireless sensors or transmitters. This micro-electromechanical system (MEMS) design utilizes the piezoelectric response of …

    louisville Repository record for Piezoelectric bistable buckled beam energy harvester. (opens in a new tab)

  9. Characterization of the MEMS directional sound sensor in the high frequency (15 - 20 kHz) range

    … Naval Postgraduate School (NPS) has developed a micro-electromechanical system (MEMS) based directional sound sensors that mimics the aural system of the Ormia Ochracea Fly. The goal of this research is to characterize a set of directional sound sensors with varying configurations that operate in …

    nps Repository record for Characterization of the MEMS directional sound sensor in the high frequency (15 - 20 kHz) range (opens in a new tab)

  10. Design, fabrication, and characterization of a microelectromechanical directional microphone

    A series of micro-electromechanical system (MEMS) based devices for acoustic direction finding have been designed and fabricated which mimic the aural system of the Ormia ochracea fly and its extraordinary directional sensitivity. To overcome the minimal spatial separation between its ears, a …

    nps Repository record for Design, fabrication, and characterization of a microelectromechanical directional microphone (opens in a new tab)

  11. Optimal Point-Spread-Function Engineering with Dynamic Optics and Event Cameras

    Computational imaging systems co-design optics and algorithms to observe phenomena beyond the reach of traditional cameras. Point-spread-function (PSF) engineering is a powerful technique wherein a custom phase mask is integrated into an optical system to encode additional information into captured …

    maryland Repository record for Optimal Point-Spread-Function Engineering with Dynamic Optics and Event Cameras (opens in a new tab)

  12. Detection of Ultrasonic Lamb Waves in Paper Using an Optical MEMS Microphone

    … transducer, more specifically an optical Micro ElectroMechanical System (MEMS) microphone with broadband capability. The MEMS device operates as a non-contact proximity probe placed less than ¼ a millimeter away from the plate. The signals are detected with a capacitive micromachined …

    gatech Repository record for Detection of Ultrasonic Lamb Waves in Paper Using an Optical MEMS Microphone (opens in a new tab)

  13. Development of a single-stage nano indenter

    … of a single degree-of-freedom stage in a MEMS (Micro-Electromechanical system) platform that enables very precise displacement as well as force control. This type of stage finds use in determining fluid properties such as viscosity; to determine the strength and rigidity of carbon nanotubes …

    uiuc Repository record for Development of a single-stage nano indenter (opens in a new tab)

  14. Development of an in-line, noncontact metrology framework for process control in roll-to-roll nanofabrication

    … framework and proof-of-concept prototype system to perform nanometer-scale topography measurements for process control feedback in the roll-to-roll (R2R) nanofabrication of various patterned films, materials, and flexible electronic devices. This work aims to bridge a gap in measurement …

    texas Repository record for Development of an in-line, noncontact metrology framework for process control in roll-to-roll nanofabrication (opens in a new tab)

  15. Improving Circuit Performance in a Trapped-Ion Quantum Computer

    … individual control in a large-scale trapped-ion system have not been achieved. Moreover, coherent gate errors in deep quantum circuits exaggerate the error since they accumulate quadratically. This thesis presents the effort to build a trapped-ion quantum computing system that possesses …

    duke Repository record for Improving Circuit Performance in a Trapped-Ion Quantum Computer (opens in a new tab)

  16. Micro Electrostatic Actuation of a Silicon Diaphragm

    … a number of applications, from hearing aids to microfluidic pumps, which utilize micro-scale actuating diaphragms. These MEMS (micro-electromechanical system) devices can be actuated by electrostatic forces, which utilize an induced electric field to pull two charged plates towards one another. …

    calpoly Repository record for Micro Electrostatic Actuation of a Silicon Diaphragm (opens in a new tab)

  17. Micro-scale characterization of breast cancer using MEMS and robotics

    … in the US. As breast cancer progresses, the microenvironment around cancerous breast tissues undergoes a physical reconfiguration to be tumor-permissive. The capability to monitor the signatures of cancer progression in breast tissue is important for improving the accuracy of diagnosis and …

    gatech Repository record for Micro-scale characterization of breast cancer using MEMS and robotics (opens in a new tab)

  18. Measuring human foot-transmitted vibration exposure in mining: a field study and prototype measurement insole design

    … occupational footwear. The device integrates micro-electromechanical system (MEMS) accelerometers at anatomically relevant locations in the heel and forefoot, coupled to a wired data acquisition system capable of meeting the International Organization for Standardization (ISO) sampling …

    laurentian Repository record for Measuring human foot-transmitted vibration exposure in mining: a field study and prototype measurement insole design (opens in a new tab)

  19. Precise Frequency and Mode Control in High Frequency Silicon and Silicon Carbide Resonant Gyroscopes

    Precision microscale gyroscopes have been gaining much attention for a wide range of applications. Micro-electromechanical System (MEMS) gyroscopes have the inherent advantage of smallsize, weight, power, cost (SWaP-C), and can be easily integrated on chip. However, the performance of commercial …

    gatech Repository record for Precise Frequency and Mode Control in High Frequency Silicon and Silicon Carbide Resonant Gyroscopes (opens in a new tab)

Page 1 of 3