Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 35 for “"Micro features"”.
-
INJECTION MOLDING OF MICRO-FEATURES
A method for creating regular arrays of surface features in the 10µm to 200µm range over large areas in metallic materials enables the use of treated surfaces on injection molds. This surface control is used for manufacturing products with controllable optical, tribological, heat transfer, and …
-
Process development for the production of optically transparent micro-features
… the low cost production of optically transparent micro-features. The goal of the study was to develop a process to fabricate optically transparent microfeatures. Two biofluidics chips were used as a case study to explore possible production pathways. The process developed was used for low unit …
-
Scalable machining of micro-features for orthopedic and tribological applications
Micro-scale surface textures have found profound application in various industrial sectors, including the biomedical and tribological communities. While numerous manufacturing methods are available for the fabrication of these micro-features, advancements in high-precision machinery and …
-
Development of a rapid tooling injection moulding process for the production of pharmaceutical oral solid dosage forms with surface micro-features
… dosage forms with accurate and precise surfacemicro-features.A novel method for the manufacture of oral solid dosage forms was developed bycoupling stereolithography additive manufacture with injection moulding in a processknown as Rapid Tooling Injection Moulding (RTIM). An assessment of a …
-
A Study on the Micro Electro-Discharge Machining of Aerospace Materials
… and complex cuts in thin, fragile parts. Micro-EDM is a growing form of manufacturing and will continue to expand within various production fields. Micro-EDM is especially attractive for the applications where the cutting time is minimal, but precision and accuracy are maximized. Micro- …
-
MICRO FEATURE ENHANCED SINTER BONDING OF METAL INJECTION MOLDED (MIM) PARTS TO A SOLID SUBSTRATE
… research exists. By applying a structure of micro features to the surface of the MIM part, this allows for shrinkage while bonding to the substrate. The micro features tolerate certain plastic deformation to permit the shrinkage and thermal expansion/contraction without causing cracks after …
-
Bacterial Adhesion and Biofilm Formation in Response to Dynamic Fluidics in a Novel Microfluidic Device
Biofilms are the primary mode of microbial life, and understanding their development is important for controlling their growth in industrial and medical settings. However, it remains challenging due to limitations in visualizing microbial processes and replicating environmental conditions. Here, a …
-
Grain Coalescence and Modeling of Nanosized Zirconia in Solid-state Sintering
… demonstrate the potential of injection molding micro features. The produced 3mm micro gear was visually defect-free with well defined gear teeth and achieving high hardness of 3Y-TZP. Sintering behavior of the nanosized powder was characterized and compared with the conventional coarse …
-
Material properties design using simulations and experiments for powder injection molding of lead zirconate titanate (PZT).
… % solids loading. PIM experiments on designed micro-pillar array geometry were performed using 52 vol. % PZT. Using PIM experiments results as basis, PIM simulations were performed on designed micro-pillar array geometries to understand the effectiveness of PIM simulations with the use of …
-
Study of Micro-grinding of Glass using On-machine Fabricated Polycrystalline Diamond (PCD) by Micro-EDM
… glass using a PCD tool. A combined block-EDM and micro-grinding process is proposed where the micro-grinding process is applied to the glass following the block-EDM operation on PCD tool. The intregrated block-EDM and micro-grinding process is conducted in a single setup, which does not involve …
-
An Experimental Investigation on Surface Characteristics of Tool Steel using Powder Mixed Micro-EDM
… Machining (EDM) focused in the fabrication of micro tools, micro components and parts with micro features. For the fabrication of complex 3-D molds using tough die materials, micro-EDM is one of the successfully applied machining processes. Since the surface finish of the micro mold cavity …
-
A study on the cleaning and modification of metal surfaces by direct current cathodic electrolytic plasma process
… the morphology and its thermodynamic background, microstructural change and its physical process. Selection of operation parameters in direct current EPP was addressed with experimental results. The major component of this work covers the corrosion improvement on widely used structural materials …
-
The Design and Integration of an Airborne Imager and Flight Campaign to Study the Time Evolution and Vertical Structures of Polar Mesospheric Clouds
… into the time evolution of PMCs, and into the micro-features of these clouds, from which gravity waves and other details of the clouds vertical structures may be obtained. These data may help us better understand the driving mechanisms of these clouds and ultimately those elements of global …
-
DEVELOPING WAX-ON-PLASTIC PLATFORMS FOR BIOANALYTICAL AND BIOMEDICAL APPLICATIONS
Developing microdevices on flexible material attracts scientific community to explore applications in different aspects of health and point of care diagnostics. Flexible substrates offer unique characteristics such as flexibility, stretchability, portability, low-cost, and simple fabrication. …
-
Probabilistic modeling of microgrinding wheel topography
… modeling of the stochastic nature of microgrinding in the machining of high-aspect ratio, ceramic micro-features. The heightened sensitivity of such high-fidelity workpieces to excessive grit cutting force drives a need for improved stochastic modeling. Statistical propagation is used …
-
Elimination of flash: a novel microembossing technique
<p>Micro-electro-mechanical systems with fluidic functions rely on micro features typically ranging from 10 to 200 Em in size. To produce these features on polymer substrates with high quality and fidelity, existing techniques typically have long cycle times and are expensive. It has been shown …
-
Micro-crack interactions and shape design optimization problems: A boundary element approach.
Most materials contain micro-scale features e.g., cracks, inclusions, secondary phases and their interfaces. The strength and life of macro-scale components fabricated from these materials essentially depend on the interactions and evolutions of associated micro-features. In the first part of this …
-
Lithofacies and Microfacies of a Fossil Hot Spring System: McGinness Hills, Nevada
Ertel, Bonnie, M.S., Spring 2009 Geology Microfacies and Morphology of a Fossil Hot Spring System, McGinness Hills, Nevada Chairperson or Co-Chairperson: Dr. Nancy Hinman The Miocene McGinness Hills sinters are a well-preserved, fossil hot spring system in Nevada. The sinter in McGinness Hills is …
-
Lithofacies and Microfacies of a Fossil Hot Spring System: McGinness Hills, Nevada
Ertel, Bonnie, M.S., Spring 2009 Geology Microfacies and Morphology of a Fossil Hot Spring System, McGinness Hills, Nevada Chairperson or Co-Chairperson: Dr. Nancy Hinman The Miocene McGinness Hills sinters are a well-preserved, fossil hot spring system in Nevada. The sinter in McGinness Hills is …
-
Surface texture generation using high-feed milling with spindle speed modulation
… are analyzed. The relationship between the micro features of the surface texture and the process parameters are determined. Surface texturing experiments are conducted based on the proposed technique, and tribology tests are performed on the textured surfaces. It is shown that the textured …
Page 1 of 2