Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 15 of 15 for “"Micro-Buckling"”.
-
Computational homogenization of cellular materials capturing micro-buckling, macro-localization and size effects
… capture the macroscopic localization due to the micro-buckling of cell walls and the size effect phenomena arising in structures made of cellular materials. Under the compression loading, the buckling phenomenon (so--called micro--buckling) of the slender components (cell walls, cell faces) of …
-
Compressive Failure of Open-Hole Carbon Composite Laminates
… journals. Two methods of modeling, one based on micro-buckling and another based on compressive residual strength, i?? are used, and the two methods compared with experiments done by others to see which one gives better results. Using the i??i? method of analysis and modeling, the author also …
-
Multi-scale analysis of wrinkling during consolidation of thermoset composites
… factors and the wrinkling of plies caused by micro-buckling has not been investigated quantitatively. Furthermore, these effects are not fully captured in current process models. This research aims to develop an efficient strategy for analysing the multi-scale mechanisms of wrinkling due to …
-
Loading Mode Dependent Effective Properties of Octet-truss Lattice Structures Using 3D-Printing
… test. The theoretical value based on the micro-buckling of truss member are used to estimate the failure strength. Modulus value appears a little overestimate compared with the experiment. Finite element (FE) simulations for uniaxial compression and tension of octet-truss lattice materials …
-
The Effectiveness of Damage Arrestment Devices in Delaying Fastener-Hole Interaction Failures in Carbon Fiber Polyurethane Foam Composite Sandwich Panels Subjected to Static and Dynamic Loading Under Increased Temperatures
… techniques to delay skin-core delamination, micro-buckling and bearing stress failures resulting from fastener-hole interactions. Composite sandwich panels, with and without damage arrestment devices (DADs), were subjected to monotonic compression at a rate of 5mm per second, and …
-
Structural Integrity of Polymer Matrix Composites Exposed to Fire Conditions
… and mechanical loading. The Budiansky-Fleck micro-buckling analysis technique was used as the failure function of the [0] surface plies. A finite element analysis (FEA) analysis was also performed and showed good agreement with the experimental data.
-
COUPLING EFFECTS IN MODELING COMPRESSIVE FAILURE IN UNIDIRECTIONAL FIBER COMPOSITES
… embodies the local length scales of both fiber micro-buckling and longitudinal load relaxation near breaks. Basedon the influence function, superposition approach, a computationally efficient scheme is developed to model the evolution of fiber and matrix stresses. Under increasing compressive …
-
Prediction of bearing failure inpin-loaded laminates
… undertaken in this thesis identified that the micro-buckling theory proposed by Professor C.T. Sun from Purdue University, Indiana USA, is the best analysis procedure for initial bearing failure in pin-loaded laminates. This failure theory has therefore been implemented in a Fortran program …
-
Instability-related delamination growth of embedded and edge delaminations
Compressive loads can cause local buckling in composite laminates that have a near-surface delamination. This buckling causes load redistribution and secondary loads, which in turn cause interlaminer stresses and delamination growth. The goal of this research effort was to enhance the understanding …
-
Modeling of chip formation mechanism in machining carbon fiber reinforced polymer
… chip formation is developed to investigate the buckling failure mode, which occurs at 0° fiber orientation, by dividing the chip formation into shearing and buckling processes. The chip length increases owing to the shear failure in the interface layer until the Euler buckling or micro buckling …
-
Compression Creep Rupture of an E-glass/Vinyl Ester Composite Subjected to Combined Mechanical and Fire Loading Conditions
… states such as local compression failures due to micro-buckling, residual strength and times to failure for composite laminates at temperatures in the vicinity of the glass transition where failure is controlled by viscoelastic effects. Given the importance of compression loading to a structure …
-
Carbon nanotube sheet scrolled fiber composite for enhanced interfacial mechanical properties
… tensile strength, as they tend to fail through micro-buckling, under compressive loading. Fiber misalignment and the presence of voids created during the manufacturing processes, add to the further reduction in the compressive strength of the composites. Hence, there is more scope for …
-
Compressive Strength of Continuous Fiber Unidirectional Composites
… Compressive strength was explained in terms of micro-buckling, in which filaments are beams on an elastic foundation. They made simplifying assumptions, with a two dimensional idealization and linearized material properties. This study builds on their model, recognizing that the shear mode of …
-
Effect of nanofillers on thermo-mechanical properties of polymers and composite laminates.
… (better resistance to fibre instability or microbuckling), hence enhancing the compressive properties of the CFRP composites. The aim of this study is to improve the properties of the CFRP composite by carefully selecting and incorporating nanofillers in the epoxy resin. The …
-
Ultrasonic Analysis and Tools for Quantitative Material State Awarness of Engineered Materials
… precursor damages (for example matrix cracking, microcracks, voids, fiber micro-buckling, local fiber breakage, local debonding, etc.) are insensitive to the low-frequency ultrasonic NDE or Structural Health Monitoring (SHM) (~100–~500 kHz) methods. Overcoming this barrier, an online method using …