Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 177 for “"Micro-cracks"”.

  1. THE INCIDENCE OF ROOT DENTINAL MICRO-CRACKS CAUSED BY RECIPROCATING AND CONTINUOUS ROTARY INSTRUMENTATION

    … to compare the incidence of root canal dentinal micro-cracks after canal instrumentation using reciprocating files (WaveOne Gold® and Twisted Adaptive®) and continuous rotation files (Edge Evolve® and EndoSequence®) in an ex-vivo benchtop study. This project used a novel methodology of finding …

    vcu Repository record for THE INCIDENCE OF ROOT DENTINAL MICRO-CRACKS CAUSED BY RECIPROCATING AND CONTINUOUS ROTARY INSTRUMENTATION (opens in a new tab)

  2. Proposal and analysis of a non-collinear wave mixing technique for the detection of micro-cracks using phased arrays

    … measurement setup for the detection of micro-scale damage in cement based materials is proposed and analyzed. The idea is to use the nonlinear phenomenon of wave mixing to characterize third order elastic behavior of a material. By wave mixing, the nonlinear interaction between two …

    gatech Repository record for Proposal and analysis of a non-collinear wave mixing technique for the detection of micro-cracks using phased arrays (opens in a new tab)

  3. In-situ corrosion health monitoring and prediction in miltary vehicles.

    … models for three modes of coating failures i.e. micro-cracks effects, blistering and edge delamination. These models can be used for the analysis of coating failure initiation and propagation, especially useful for coating life assessment. The models follow multidisciplinary approach coupling the …

    bournemouth Download PDF for In-situ corrosion health monitoring and prediction in miltary vehicles. (opens in a new tab) Embargoed until 2099-12-31

  4. Crack propagation in CBN insert in hybrid machining of RBSN ceramic

    … stresses in the cutting insert, especially when micro-cracks are present in the insert exhibits. It is found that a decrease in cutting temperature from 1740°C to 597°C led to approximately 660 stress reduction at the tip of the micro-cracks on the flank face of the cutting tool, thus …

    unlv Repository record for Crack propagation in CBN insert in hybrid machining of RBSN ceramic (opens in a new tab) Download PDF for Crack propagation in CBN insert in hybrid machining of RBSN ceramic (opens in a new tab)

  5. Pore Network Modeling of Gas Transport in Source Rocks

    … including pores down to a few nanometers, micro-cracks and fractures, which influences the fluid storage and transport in the formation. In this dissertation, initially I present an upscaling study to gas transport in nano-scale within the organic material of the source rock via pore …

    tamu Repository record for Pore Network Modeling of Gas Transport in Source Rocks (opens in a new tab)

  6. The Effect Of Focused Extracorporeal Shock Wave (ESW) On Calvaria Bone Ex Vivo

    … stone. Recent evidence shows that ESW produces micro-cracks in the bones of horse legs. As micro-cracks in bone can lead to an increased rate of bone turnover (remodeling), we hypothesize that proper application of ESW will increase bone turnover rate through generating micro-cracks in bone. …

    marquette Repository record for The Effect Of Focused Extracorporeal Shock Wave (ESW) On Calvaria Bone Ex Vivo (opens in a new tab)

  7. Μη γραμμικές ακουστικές τεχνικές διάγνωσης: θεωρία και εφαρμογές

    … of systems like beams, rods, plates as well as micro-cracks in human bone. Particularly, the nonlinear intermodulation phenomena of waves propagating into a material was studied and their generation mechanisms, such as nonlinear elasticity, nonlinear losses and hysteresis.

    greece Repository record for Μη γραμμικές ακουστικές τεχνικές διάγνωσης: θεωρία και εφαρμογές (opens in a new tab)

  8. Effects of surface finish on the fatigue life of "cold-rolled" mild steel specimens

    … the electro-polished speci­mens. Also, fatigue cracks could be observed sooner on the electro-­polished specimens than on the hand-polished specimens. The ratio of cycles to crack to total life ranged from 0.69 for electro-polished specimens to 0.83 for hand-polished specimens. In the second …

    sask Repository record for Effects of surface finish on the fatigue life of "cold-rolled" mild steel specimens (opens in a new tab)

  9. Thermal Cycle Effects on Laminated Composite Plates Containing Voids

    … In this work, the influence of voids on the micro-crack formation, under thermal cycles and environmental conditions, were investigated and analyzed. Thermal cycle experiments were performed using liquid nitrogen and oven followed by microscopic observation of the polished cross-section of …

    concordia Download PDF for Thermal Cycle Effects on Laminated Composite Plates Containing Voids (opens in a new tab)

  10. Investigation of hot cracking in additive manufactured nickel-base superalloys

    … is to reduce the amount of defects, primarily micro-cracks, in a laser powder bed fusion (LPBF) processed γ’ precipitation strengthened Ni-base superalloy. LPBF process parameter optimization, by using a design of experiment approach lead to reduction of defect density to very low levels. This …

    chalmers Repository record for Investigation of hot cracking in additive manufactured nickel-base superalloys (opens in a new tab)

  11. Influence of Low Temperature Degradation on Microstructural Integrity of Zirconia Dental Implants

    … and its influence on phase stability and micro-structural integrity in terms of increased micro-crack formation. In the case of dental implants, this could possibly result in delamination and interference with bone to implant contact and eventually lead to loss of integration and failure. …

    loma-linda Repository record for Influence of Low Temperature Degradation on Microstructural Integrity of Zirconia Dental Implants (opens in a new tab)

  12. In situ investigation of defects in semiconductors

    Dislocations and slip bands which originate from micro-cracks and other defects in silicon wafers during rapid thermal processing have a detrimental influence on the properties of electronic devices. Many of these defects originate at the edges of wafers. The characterization of these defects can …

    freiburg-diss Repository record for In situ investigation of defects in semiconductors (opens in a new tab)

  13. Osteocyte Signalling in Response to Mechanical Loading after Physical Cellular Damage and Hyperglycemia

    … In the bone, mechanical loading causes micro-cracks, which cause physical damage to osteocytes and initiate bone remodeling. However, the role of subsequent mechanical loading on osteocyte is unclear. In this study, we have developed an in vitro cell model to study the impact of …

    toronto-retro Repository record for Osteocyte Signalling in Response to Mechanical Loading after Physical Cellular Damage and Hyperglycemia (opens in a new tab)

  14. Tomographic imaging of rock defects and rock failure process

    … the rock mass. Ability to track development of cracks when a rock structure is subjected to stress is an important goal in rock mechanics and engineering. This research project focused on detecting fracture and rock joints (defects) and visualizing the failure process of rocks using tomography …

    unsw Repository record for Tomographic imaging of rock defects and rock failure process (opens in a new tab)

  15. A study of the abrasive waterjet micro-machining process for quartz crystals and impact erosion by high velocity micro-particles

    … possesses distinct advantages in performing micro-machining tasks over many other technologies, but further effort is required to enhance its cutting performance and understand the associated impact erosion process. An experimental study using a pre-mixing AWJ, or abrasive slurry jet, to …

    unsw Repository record for A study of the abrasive waterjet micro-machining process for quartz crystals and impact erosion by high velocity micro-particles (opens in a new tab)

  16. Embrittlement of CU-17Al Alloy By Liquid Mercury

    … deformation in the initiation and propagation of cracks in Cu-17Al alloy embrittled by liquid mercury has been studied. It is proposed that extensive plastic deformation and work hardening must occur at the crack-tip during propagation in order to raise the local flow stress to a critical level at …

    mcmaster Repository record for Embrittlement of CU-17Al Alloy By Liquid Mercury (opens in a new tab)

  17. The Effects of Using Alkali-Silica Reaction Affected Recycled Concrete Aggregate in Hot Mix Asphalt

    … of existing gel. The Lottman test and micro-calorimeter were used to determine the moisture susceptibility of HMA made with ASR-RCA. A differential scanning calorimeter (DSC) with thermogravimetric analysis (TGA) was used to evaluate the drying of an artificial gel and x-ray diffraction …

    tamu Repository record for The Effects of Using Alkali-Silica Reaction Affected Recycled Concrete Aggregate in Hot Mix Asphalt (opens in a new tab)

  18. Friction Bit Joining of Dissimilar Combinations of DP 980 Steel and AA 7075

    … Welds were also created and examined under a microscope in order to validate a simulation model of the FBJ process. The simulation model predicted a similar weld shape and bond length with 5 percent accuracy. Joints made with external bits demonstrated comparable joint strength to internal …

    byu Repository record for Friction Bit Joining of Dissimilar Combinations of DP 980 Steel and AA 7075 (opens in a new tab) Download PDF for Friction Bit Joining of Dissimilar Combinations of DP 980 Steel and AA 7075 (opens in a new tab)

  19. Development of constitutive models for thin thermoelastic interphase in composite materials

    … overall thermo-mechanical performance. At the micro-mechanical scale, a distinct interphase forms between the constituent materials, characterized by its own unique set of properties. The thermo-mechanical behavior across this interphase is of critical importance, as gradients or …

    trento Repository record for Development of constitutive models for thin thermoelastic interphase in composite materials (opens in a new tab)

Page 1 of 9