Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 96 for “"Micro-devices"”.

  1. Wearable energy-harvesting micro devices /

    … is wearable energy-harvesting mircro devices. They are designed to harvest energy from the surrounding environment to supply power on the go for small electronic devices and sensors. We used low-cost and scalable fabrication methods that make them appropriate for mass production …

    missouri Repository record for Wearable energy-harvesting micro devices / (opens in a new tab)

  2. Investigation of micro-devices for neurobiological applications

    … cell culture with commercial or in-house built micro-electrode arrays and MEMS devices. The resulting device is intended to support neuronal cell culture on its surface, expose specific portions of a neuronal population to different environments using microfluidic gradients and stimulate/record …

    cork Repository record for Investigation of micro-devices for neurobiological applications (opens in a new tab)

  3. Processing and Fabrication of Polyaniline Micro-Devices Using Photolithography

    … which have opened up new possibilities for microelectronic devices. However, patterning of polymers using the same processing technique as inorganic materials for device fabrication has proved to be a challenge. Overcoming this problem and developing an alternative patterning process for the …

    mo-state Repository record for Processing and Fabrication of Polyaniline Micro-Devices Using Photolithography (opens in a new tab)

  4. Development of thermoelectric materials and micro-devices for cooling and power generation

    … of thermoelectric thin-film materials into micro-device fabrication offers various advantages compared to bulk thermoelectric devices such as miniaturized size, high-density integration and substantial reduction of the material usage that helps in reducing the weight of the system. …

    cork Repository record for Development of thermoelectric materials and micro-devices for cooling and power generation (opens in a new tab)

  5. Three-dimensional micro fabrication of active micro devices using soft functional materials

    Made available in DSpace on 2012-02-01T00:48:26Z (GMT). No. of bitstreams: 3 Lee_HoWon.pdf: 4405248 bytes, checksum: 41d914103a408ca170c48385421652fa (MD5) license.txt: 4054 bytes, checksum: 2175a1ca06310f92256240bfeceb9bbb (MD5) Lee_Ho Won.docx: 54614972 bytes, checksum: …

    uiuc Repository record for Three-dimensional micro fabrication of active micro devices using soft functional materials (opens in a new tab)

  6. SURFACE CHEMISTRY EVALUATION IN THE DESIGN AND FABRICATION OF MICRO-DEVICES FOR PROTEIN ANALYSIS

    … has been investigated with the aim of designing micro-devices and/or microarrays for protein analysis. In the first part of the thesis, the micro-fabrication of a device for isoelectric focusing has been studied. The development of this device has required the covalent attachment of hydrogel …

    milano Repository record for SURFACE CHEMISTRY EVALUATION IN THE DESIGN AND FABRICATION OF MICRO-DEVICES FOR PROTEIN ANALYSIS (opens in a new tab)

  7. Micro-fabrication and characterization of highly doped silicon-germanium based thermoelectric generators

    … In this work, silicon-germanium based micro-devices have been designed, developed and characterized with the aim of addressing the heat recovery needs of the automotive industry. The micro-scale of the fabricated devices, together with the full compatibility with silicon …

    glasgow Download PDF for Micro-fabrication and characterization of highly doped silicon-germanium based thermoelectric generators (opens in a new tab)

  8. 3D Micromachining of Optical Devices on Transparent Material by Ultrafast Laser

    … has been investigated in the field of microstructure processing for the biomedical, optical, and many other laboratory and industrial fields. Ultrafast laser machining has numerous unique advantages, including high precision, a small heat affected area, high peak intensity, 3D …

    clemson Repository record for 3D Micromachining of Optical Devices on Transparent Material by Ultrafast Laser (opens in a new tab)

  9. Development of Automated Robotic Microassembly for Three-dimensional Microsystems

    Robotic microassembly is a process to leverage intelligent micro-robotic technologies to manipulate and assemble three-dimensional complex micro-electromechanical systems (MEMS) from a set of simple-functional microparts or subsystems. As the development of micro and nano-technologies has …

    toronto-retro Repository record for Development of Automated Robotic Microassembly for Three-dimensional Microsystems (opens in a new tab)

  10. Femtosecond laser micromachining of microstructures for sensing and detection

    … fabrication and analysis of miniature functional devices that can be used for different sensing and detection applications. As the first step, the surface characteristics and morphology of the micro/nano structures on substrates (fused silica and silicon) fabricated in water and in air by …

    must-thes Repository record for Femtosecond laser micromachining of microstructures for sensing and detection (opens in a new tab)

  11. Fabricating of Stable Thin Film Microdevices with UV Laser

    … a limiting factor in the practical deployment of micro-scale sensors and actuators, where small structural, thermal, or material changes can produce disproportionate performance drift over time. This thesis investigates drift mitigation strategies in two ultraviolet (UV) laser–fabricated …

    waterloo Repository record for Fabricating of Stable Thin Film Microdevices with UV Laser (opens in a new tab)

  12. Basal plane thermal conductivity of thin germanane layers

    … (GeH) layers was measured using suspended micro-devices with integrated heaters and thermometers. The thermal contact resistance of the GeH samples suspended on the measurement devices was determined from the measured thermal resistance values of samples with different suspended lengths. …

    texas Repository record for Basal plane thermal conductivity of thin germanane layers (opens in a new tab)

  13. Multiphoton Absorption Polymerization: Issues and Solutions

    … importance as a means for fabricating 3-D micro-devices. By focusing an ultrafast laser inside a prepolymer resin, radical polymerization can be initiated by two-photon absorption of a photoinitiator. The result is a highly cross-linked solid polymer point, or voxel, which is extended to …

    maryland Repository record for Multiphoton Absorption Polymerization: Issues and Solutions (opens in a new tab)

  14. Micro & nano scale mechanical testing and assembly with applications to metal based microsystems

    Metal-based high-aspect-ratio microscale structures (HARMS) are fundamental building blocks for functional metallic micro devices. This dissertation focuses on addressing several problems in fabrication and assembly of metal based microchannel devices. First, the materials’ responses to mechanical …

    lsu-thes Repository record for Micro & nano scale mechanical testing and assembly with applications to metal based microsystems (opens in a new tab)

  15. A new method of temporal phase shifting using principle of stroboscopy for characterizing microstructures

    … surface, profile and displacement properties of micro devices. Common methods of phase shifting require PZT based devices that have inherent errors due to non-linearity. To avoid these errors during phase shifting, a new phase shifting technique is presented in this work. A detailed analysis of …

    concordia Download PDF for A new method of temporal phase shifting using principle of stroboscopy for characterizing microstructures (opens in a new tab)

  16. MEMS-based Mechanical Characterization of Micrometer-sized Biomaterials

    … biological cells. For example, many polymeric microcapsules for drug delivery use are spherical particles of micrometers size. In order to mechanically characterize individual micrometer-sized biomaterials, the capability of capturing high-resolution and low-magnitude force feedback is …

    toronto-retro Repository record for MEMS-based Mechanical Characterization of Micrometer-sized Biomaterials (opens in a new tab)

  17. Control design and genetic algorithm optimization for electrostatic MEMS

    … and control design for electrostatic micro devices. First, an alternative modeling technique, the interpolated force model, for electrostatic micro devices is discussed. The method provides improved computational efficiency relative to a benchmark model, as well as improved accuracy …

    mtu Repository record for Control design and genetic algorithm optimization for electrostatic MEMS (opens in a new tab)

  18. Experimental investigations on thermal and hydrodynamic entrance regionis in microchannels using oPIV and TLC techniques

    Micro-systems are expected to have abundant applicability in the biomedical industry, where operations such as medical diagnostics or DNA synthesis and sequencing, could potentially be carried out on a hand-held device. Fully integrated micro-systems consist of several processes needed to carry out …

    concordia Download PDF for Experimental investigations on thermal and hydrodynamic entrance regionis in microchannels using oPIV and TLC techniques (opens in a new tab)

  19. Flow of complex biofluids in microfluidic devices

    … and analyzes the flow of complex fluids in microfluidic devices under various conditions for the purpose to optimize the design of BioMEMS or Lab-on-a-chip devices. A series of experiments are designed and carried out to test the hypothesis of a??nodal shifta?? when two flowing miscible …

    nus Repository record for Flow of complex biofluids in microfluidic devices (opens in a new tab) Download file for Flow of complex biofluids in microfluidic devices (opens in a new tab)

Page 1 of 5