Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 62 for “"Micro-mechanics"”.

  1. Micro-mechanics modelling of smart materials.

    … composites. The simulation models using various micro scale modelling techniques to the aluminum alloy matrix composite, strengthenedwith varying amounts of silicon carbide particulate were done to predict the material state at critical points with properties of Al-SiC which had been heat …

    sheffield-hallam Download PDF for Micro-mechanics modelling of smart materials. (opens in a new tab)

  2. A study of the micro-mechanics of granular media

    … ingredients which take into account the internal micro-mechanical response to deformation. Unfortunately, at present, very little is known about these mechanisms and therefore it is instructive to find out more about the internal nature of granular samples by conducting suitable tests. In contrast …

    aston Download PDF for A study of the micro-mechanics of granular media (opens in a new tab)

  3. Micro-mechanics of irradiated Fe-Cr alloys for fusion reactors

    … a cube corner, Berkovich and spherical tip, and micro-cantilever testing with two different geometries, highlighted that the measurement of irradiation hardening was largely dependent on the type of test used. Selected methods were used for the comparison of Fe6%Cr irradiated by ions and neutrons …

    oxford Repository record for Micro-mechanics of irradiated Fe-Cr alloys for fusion reactors (opens in a new tab)

  4. Micro-Mechanics Based Representative Volume Element Modeling Of Heterogeneous Cementitious Materials

    … of various constituent phases from digital microstructures. The microstructure is modeled as a micro-scale representative volume element (RVE) in ABAQUS to generate cubes several tens of microns in dimension and subjected to various prescribed deformation modes to generate the effective …

    mississippi Repository record for Micro-Mechanics Based Representative Volume Element Modeling Of Heterogeneous Cementitious Materials (opens in a new tab)

  5. Critical state behaviour of granular materials and associated micro-mechanics : a DEM study

    … been investigated within the critical state soil mechanics (CSSM) framework without much observation of micro-mechanics. Thus, the discrete element method (DEM) is adopted in this study. Despite of its own numerical demands, DEM not only provides the insight of micro-mechanics, but is also free …

    adelaide Repository record for Critical state behaviour of granular materials and associated micro-mechanics : a DEM study (opens in a new tab)

  6. Continuous characterization of stiffness of cement-based materials: experimental analysis and micro-mechanics modelling

    … suggested. The thesis ends with a foray into the microstructural simulation of the stiffness evolution of cementitious materials by taking advantage of the unprecedented quantitative experimental information obtained with EMM-ARM. The stiffness evolution of cement pastes, simulated by μic/AMIE, …

    minho-thes Repository record for Continuous characterization of stiffness of cement-based materials: experimental analysis and micro-mechanics modelling (opens in a new tab)

  7. A novel Monte Carlo - Discrete Element Method approach for the micro-mechanics of colloidal suspensions

    This thesis is focused on the development of a novel computational tool capable of predicting the behaviour of dilute colloidal suspensions. The work has been focused in particular on the investigation of the aggregation and breakup phenomena occurring under the effect of a spatially uniform shear …

    poli-torino Repository record for A novel Monte Carlo - Discrete Element Method approach for the micro-mechanics of colloidal suspensions (opens in a new tab)

  8. Progressive damage and failure of unidirectional fiber reinforced laminates under impact loading with composite properties derived from a micro-mechanics approach

    Micromechanics theories have been used to develop macro-level constitutive relations for infinitesimal elastoplastic deformations of unidirectional fiber reinforced laminates. The matrix is assumed to be isotropic and deform elasto-plastically and the fibers transversely isotropic and linear …

    vt Repository record for Progressive damage and failure of unidirectional fiber reinforced laminates under impact loading with composite properties derived from a micro-mechanics approach (opens in a new tab)

  9. A damage plastic approach for modelling strain hardening cementitious composites

    … relies on the fibre/matrix properties at the micro-scale. A micro-mechanics based constitutive model for fibre reinforced strain hardening cementitious composites for finite element simulations of structural components is required. Steel reinforced strain hardening cementitious composites …

    glasgow Repository record for A damage plastic approach for modelling strain hardening cementitious composites (opens in a new tab) Download PDF for A damage plastic approach for modelling strain hardening cementitious composites (opens in a new tab)

  10. Mechanism-based modeling of ductile void growth failure in multilayer structures

    … serves to gain a deeper understanding on the micro-mechanics of vapour pressure-assisted ductile fracture. IC packages assembly typically consists of intricate multilayer structures with polymeric matrix composites constituents, e.g. glass fiber and Ag-filled epoxy. Research areas thus …

    nus Repository record for Mechanism-based modeling of ductile void growth failure in multilayer structures (opens in a new tab) Download file for Mechanism-based modeling of ductile void growth failure in multilayer structures (opens in a new tab)

  11. Fracture Initiation and Propagation in Low Porosity Crystalline Rocks: Implications for Excavation Damage Zone (EDZ) Mechanics

    … rock masses have a significant influence on the mechanics and geometry of EDZs, and this research aims to provide a better understanding of these parameters for brittle rocks. This research addresses the short- and long-term in situ behaviour of massive brittle rock masses through …

    queens Repository record for Fracture Initiation and Propagation in Low Porosity Crystalline Rocks: Implications for Excavation Damage Zone (EDZ) Mechanics (opens in a new tab)

  12. Investigations Into the Physical Mechanisms That Facilitate Transformation Hysteresis in Shape Memory Alloys

    … using a theoretical approach which combines micro-mechanics and thermodynamics into a thermo-mechanical framework. Models are formulated for the thermal and stress hysteresis based on a thermo-mechanical framework so as to shed light into differential hysteresis magnitudes. Current …

    uiuc Repository record for Investigations Into the Physical Mechanisms That Facilitate Transformation Hysteresis in Shape Memory Alloys (opens in a new tab)

  13. Nonlinear analysis of laminated composite shells using a micromechanics-based progressive damage model

    A micromechanics-based model for progressive failure analysis of laminated composite shell structures has been developed and implemented. The model couples a finite element model for nonlinear analysis of laminated shells with a micro mechanics elasticity solution for predicting failure and …

    vt Repository record for Nonlinear analysis of laminated composite shells using a micromechanics-based progressive damage model (opens in a new tab)

  14. Numerical determination of elastic and viscoelastic properties of aligned continuous and discontinuous fiber reinforced composites.

    Micro-mechanics analysis using the Representative Volume Element (RVE) approach implemented with the Finite Element Method (FEM) has been extensively exploited for determining material properties of unidirectional fibrous polymer composites. However, prior RVE research has primary focused on …

    baylor Repository record for Numerical determination of elastic and viscoelastic properties of aligned continuous and discontinuous fiber reinforced composites. (opens in a new tab)

  15. The vibro-acoustic modelling and analysis of damage mechanisms in paper

    … associated with its production process. The microscopic structure of paper consists of a random mesh of paper fibres connected by hydrogen bonds. This implies the existence of the two damage mechanisms of interest, the failure of a fibre/fibre bond and the failure of a fibre. The majority of …

    greenwich Download PDF for The vibro-acoustic modelling and analysis of damage mechanisms in paper (opens in a new tab)

  16. Multi-scale mechanism based life prediction of polymer matrix composites for high temperature airframe applications

    … are investigated. A three-dimensional (3-D) micro-mechanics based finite element analysis (FEA) was conducted to investigate the residual stresses due to thermal oxidation using an in-house FEA code (NOVA-3D). In the second part of this dissertation, a novel numerical-experimental methodology …

    alabama Repository record for Multi-scale mechanism based life prediction of polymer matrix composites for high temperature airframe applications (opens in a new tab)

  17. Optimization of optical computed tomography techniques for the synthesis of particle aggregate models

    … mixtures is important for understanding the micro-mechanics of granular materials. Also, numerical synthesis of 3-D particle shapes from their corresponding shape descriptors is required for developing discrete element models (DEMs) that can be used to predict particle contact-forces, and …

    rowan Repository record for Optimization of optical computed tomography techniques for the synthesis of particle aggregate models (opens in a new tab)

  18. Hydro-Mechanical Coupling and Failure Behavior of Argillaceous Sedimentary Rocks: A Multi-Scale Approach

    … framework that encompasses micro-mechanics and a multi-scale approach. The developed model considers argillaceous sedimentary rocks to be comprised of a mixture of clay aggregates and rock-type inclusions. The clay fraction has a dual porosity arising from micropores at the …

    calgary Repository record for Hydro-Mechanical Coupling and Failure Behavior of Argillaceous Sedimentary Rocks: A Multi-Scale Approach (opens in a new tab)

Page 1 of 4