Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 16 of 16 for “"Microbridge"”.
-
Ultra-low power microbridge gas sensor
A miniature, ultra-low power, sensitive, microbridge gas sensor has been developed.The heat loss from the bridge is a function of the thermal conductivity of thegas ambient. Miniature thermal conductivity sensors have been developed for gaschromatography systems [1] and microhotplates have been …
-
Microbridge resonators with embedded nanochannels for attogram resolution in liquid
L'abstract è presente nell'allegato / the abstract is in the attachment
-
Microbridge Formation for Low Resistance Interline Connection Using Pulsed Laser Techniques
… In this work, four new structures, called microbridge, were designed to form all types of link. Laser processing experiments were performed to verify the designs. The results show that two-lower-level-metal-line design has higher performance (low link resistance), higher productivity (broad …
-
Micro-electro-thermo-magnetic Actuators for MEMS Applications
… the introduced techniques. Either buckling of a microbridge by thermal stress, lateral deflection of a microbridge by electro- magnetic force, or combined effects of both can be employed for microactuation. The proposed method here is MicroElectroThermoMagnetic Actuation (METMA), which uses the …
-
Applications of Radiometric Measurements in Non-Contact Thermometry and Mesopic Photometry
… temperature measurement was a silicon microbridge emitter. The temperature of the microbridge was determined from its radiance spectrum in the visible and near-infrared regions. In contrast to previous studies, a grey body assumption was not used, and the determination of temperature …
-
Regenerated spider silk as a new biomaterial for microelectro-mechanical systems ((MEMS) applications
… was then developed to create a free standing microbridge structure. Mechanical properties of the film were obtained by both nanoindenting the film on silicon substrate, and by fracture testing of the microbridge. Once these mechanical properties were obtained, the magnetic properties were …
-
Bulk-micromachined mass airflow sensor fabrication and testing methodology for an undergraduate microfabrication course.
… a thermally-isolated, thin-film, dielectric, microbridge/diaphragm design. In addition, several fabrication methodologies were explored, as well as a means to test and evaluate the sensors for this undergraduate class laboratory. The mass airflow sensor architecture chosen was based upon a …
-
Design and processing of micromechanical sensor devices
<p>A multi-purpose cantilever beam and microbridge accelerometer structure has been designed and fabricated in this work. This same structure with modification can be employed as a capacitive accelerometer, mechanical resonance accelerometer, and a piezoresist accelerometer. Surface …
-
Enhancing microbolometer performance at terahertz frequencies with metamaterial absorbers
… be embedded in the metamaterial to form a thin microbridge. Simulations indicated that if the bolometric layer was resistive enough or close enough to the ground plane, then absorption would be largely unaltered. Metamaterials with a conductive Titanium (Ti) layer embedded into the dielectric …
-
Magnetic flux dynamics in superconducting films studied by scanning Hall probe microscopy
… Superconducting Dripping Faucet, we analyzed, in microbridge geometry, the dynamics of the magnetic flux nucleation in a one-dimensional type-I superconducting channel. For this experiment we have developed a novel high-bandwidth Hall probe to detect in real time the nucleation and subsequent …
-
Applications of thermophysical characterization using the 3-omega technique
… thermoelectric polymers. Finally, a suspended microbridge platform to measure temperature-dependent thermal conductivity in nanowires is explored using a modification of 3ω technique. Data analysis using the modified technique is performed using an equivalent thermal impedance circuit and is …
-
Design and fabrication of surface textured MEMS for infrared gas sensors
… design and fabricate the proposed device onto a microbridge that enable the power efficiency heating the device and enhance its sensitivity to gas concentration. This fabrication process (MicraGEM) provided by CMC (Canadian Microelectronics Corporation) and Micralyne Incorporation. Unfortunately, …
-
Design and implementation of out-of-plane thermal actuators
… of using thermal expansion buckle up effect of a microbridge structure to develop a vertical motion, large-force, large-displacement electrical thermal actuator device for micro systems application. Initial results on a prototype system are described in this thesis. The focus of this investigation …
-
Computational and experimental development of ultra-low power and sensitive micro-electro-thermal gas sensor
… grown silicon dioxide sacrificial layer. The microbridge is covered by 200 nm silicon nitride layer to provide more life time. Analytical models were developed that describe the relationship between the sensor response and ambient gas material properties. To obtain local temperature …
-
MEMS micro-bridge actuator for potential application in optical switching
… actuator could not have been achieved. This microbridge actuator is designed, simulated using ANSYS, fabricated and tested. The results from the testing have shown a good agreement with analytical prediction and ANSYS simulation. The actuator demonstrated bi-stability, two-way actuation and …
-
Pokročilé techniky mikroobrábění
Výroba mikro-elektro-mechanických systémů (MEMS) vyžaduje pokročilý stupeň miniaturizace, kterého nelze dosáhnout klasickými mikroelektronickými technologiemi. Tzv. mikroobrábění zahrnuje celou řadu specifických technik, kterými lze zpracovat materiál, nejčastěji křemík, do podoby mikrostruktury, …