Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 27 for “"Microcomposites"”.
-
Injection Molding of Pregenerated Microcomposites
… concerned with injection molding pregenerated microcomposites composed primarily of poly(ethylene terephthalate) (PET) as the matrix and HX1000 as the thermotropic liquid crystalline polymer (TLCP). Several factors were examined to maximize the mechanical properties of these composites, …
-
Carbon nanotube - Polymer nanocomposites & Activated charcoal - Polymer microcomposites
… and characterisation of five novel polymer nano/microcomposites. Separate sets of single wall carbon nanotubes (SWCNT)-poly (vinyl alcohol) (PVA) and COOH functionalised multi wall carbon nanotubes (MWCNT)-PVA nanocomposite films of 50–80 μm were fabricated through solution-cast; similarly, …
-
Synthesis of Functionalized Polysiloxanes and Investigation of Highly Filled Thermally Conductive Microcomposites
… were dispersed throughout the resins and the microcomposites were investigated as thermally conductive adhesives. Random polysiloxane copolymers containing controlled number average molecular weights (Mns) and compositions with systematically varied concentrations of hydridomethylsiloxy- or …
-
The processing of microcomposites based on polypropylene and two thermotropic liquid crystalline polymers in injection molding, sheet extrusion, and extrusion blow molding
… liquid crystal polymers (TLCPs), referred to as microcomposites. The processing methods used are injection molding, sheet extrusion, and extrusion blow molding. The TLCPs used are HX6000 and Vectra A950. The microcomposites are produced by drawing strands of PP and TLCPs generated by means of a …
-
Multi-Functional Composite Materials for Catalysis and Chemical Mechanical Planarization
… This first objective involved the fabrication of microcomposites consisting of titanium dioxide (TiO2) nanoparticles confined within porous, microgels of a thermo-responsive polymer for use in the photocatalytic treatment of wastewater. TiO2 has been shown to be an excellent photocatalyst with …
-
Processing and properties of composites based on high density polyethylene and thermotropic liquid crystalline polymers
… melting point, but below the TLCP melting point, microcomposites were obtained. Microcomposites generated at the lowest temperatures had higher tensile properties than found for in situ composites and similar to glass reinforced HDPE. At 170°C the pregenerated fibers were no longer deformed during …
-
Design, Manufacturing, and Characterization of a Novel Ceramic Matrix Composite
… Al2O3/SiC, BN/PSZ, ZrC/ZTA, and SiC/Si3N4/SiC. Microcomposites were evaluated for tensile properties using a standard displacement controlled tensile test program. Microcomposites were tested at room temperature immediately following fabrication and following exposure to a standard atmosphere at …
-
Micro and nano composites composed of a polymer matrix and a metal disperse phase.
… to form agglomerates. Generally the presence of microcomposites affects negatively the mechanical properties. For the nanoparticles, composites with a higher elastic modulus than that of the neat materials are achievable. For both micro- and nanocomposites it is feasible to lower the friction …
-
Characteristics and modeling of the fracture properties of polymer-silica microparticulate composites via macroscopic scratch tests
… on the material properties of polymer-silica microcomposites, both experimentally and theoretically. A wax mixture with spherical glass bead inclusions is developed as a model material. The hardness and fracture toughness of composites containing 0%, 5%, 10%, and 20% spherical glass bead …
-
Micro- and Nanostructured Polymeric Materials for art protection and Restoration
… melt-compounded Paraloid and Aquazol based microcomposites with various amounts (5÷30 wt%) of CMC and thin films of Aquazol 500 micro- and nanocomposites produced by the solution mixing method with a CMC and CNC content of 5-10-30 wt% were investigated. Several characterization techniques …
-
Understanding the effect of nanofillers on the properties of polypropylene and glass fiber/polypropylene multiscale composites
… have also been used for the preparation of microcomposites reinforced with short glass fibers (GF). Interfacial shear strength (ISS) was measured by means of the single fiber fragmentation test on various PP/GF microcomposites. Results show that the strength at the fiber/matrix interface can …
-
Kompozitų, sudarytų iš polimerų ir organinių bei neorganinių nanodalelių, ultragarsinė ir dielektrinė spektroskopija /
… to understand, how properties of nano- and microcomposites depend on the ratio and type of its constituents. Moreover, it is important to determine the reliability and durability of a material prior to the massive production on the market. Therefore, conducted repetitive experiments under …
-
Ultrasonic and dielectric spectroscopy of composites based on polymers and organic or inorganic nanoparticles /
… to understand, how properties of nano- and microcomposites depend on the ratio and type of its constituents. Moreover, it is important to determine the reliability and durability of a material prior to the massive production on the market. Therefore, conducted repetitive experiments under …
-
Cure and Conductivity: Investigation of Thermal Processing of Silver Nanobelt - Epoxy Composites
… 1) reduced total filler content compared to microcomposites, resulting in reduced cost; 2) improved final conductivity; 3) improved longevity due to high nanobelt stability. The current work is focused on several studies of electrically conductive composites, and of silver nanobelts: 1) …
-
Processing and characterization of unidirectional thermoplastic nanocomposites
… were performed and compared with traditional microcomposites. Compressive as well as shear strength of nanocomposites was improved by improving the yield strength of the surrounding matrix through the dispersion of nanoclay. Significant improvements were achieved in compressive strength and …
-
Nanodielectrics for machine insulation
… of nano-silica particles into conventional microcomposites has suggested the possible synergetic effects due to the presence of both nano and micro fillers.<br/>Furthermore, the long-term performance of the unfilled epoxy and its nanocomposites has been explored. Open branch trees with the …
-
The effect of nano size fillers on electrical performance of epoxy resin
… examined. In addition, traditional epoxy resin microcomposites were also prepared and tested and the results were compared with those obtained from epoxy resin/nanocomposites. The present results indicate that the presence of nano-sized fillers enhances the insulation properties of the epoxy …
-
Novel composite materials synthesized by the high-temperature interaction of pyrrole with layered oxide matrices
… first members of a new class of heterogeneous microcomposites characterized by incomplete occupancy by the metal oxide core of the volume encapsulated by the rigid, amorphous permeable polymeric membrane that reproduces the volume of the initial grain of precursor substrate. The method may be …
-
High Volume Fraction Mg-based Nanocomposites: Processing, Microstructure And Mechanical Behavior
… dynamic response of Mg/SiC nanocomposites and microcomposites, and discussed the underlying mechanisms. Strain softening was noticed in the milled Mg sample under quasi-static compression. Similarly, the strengthening effect leveling off was also observed in the Mg-15 vol.% SiC samples under …
Page 1 of 2