Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 18 of 18 for “"Microcomputers -- Buses"”.
-
A gate array chip set as a fault-tolerant bus interface unit based on nubus protocols
… concept, and the 32-bit multimaster buses thus come into play since these high-performance systems need to communicate with each other. During communication, commands and large blocks of data are transmitted across the bus. Along with the multiprocessor system, the single-CPU system …
-
Centralized optical backplane bus using holographic optical elements for high performance computing
Optical communication is distinguished for its enormous interconnect capacity over long distance. As the cost of optical components drops, high bandwidth optical systems were successfully employed into local area network and computer racks because electrical counterparts are not able to deal with …
-
Modular, Configurable Bus Architecture for Ease of IP Reuse on System on Chip and ASIC Devices
Integrated Circuit (IC) designs are increasingly moving towards Intellectual Property (IP) reuse for various targeted products and market segments. Therefore, there is a need to share and synergize internal bus architectures to enable the reuse of IP blocks for various ASIC and SoC applications. …
-
Parallel processing testbed using the NuBus
In this thesis the Nu Machine is evaluated as a parallel processing testbed. The system consists of MC6801 0 microprocessor boards, half megabyte memory boards and a system diagnostic unit. The NuBus is used as its shared backplane bus. The suitability and the problems encountered in implementing …
-
An interactive display using IEEE STD 488-1978 interface
Not Available.
-
Data compression application to the MIL-STD 1553 avionics data bus.
… approaching message capacity on its MIL-STD-1553 buses. To slow this assent to capacity limits, one possible solution implements data compression techniques to increase bandwidth. In these efforts, this thesis examines different lossless compression schemes to find ideal options to consider for …
-
Activity-aware modeling and design optimization of on-chip signal interconnects
Thesis (Ph. D.)--Michigan State University. Department of Electrical and Computer Engineering, 2006
-
Implementation of lossless compression algorithms for the MIL-STD-1553.
This thesis focuses on the bandwidth limitations faced by the legacy MIL-STD-1553 data bus. In order to improve bandwidth performance, lossless implementations of data compression routines have been proposed. Using data bus captures from the F/A-18 C/D simulator it has been possible to determine …
-
Interfacing the IBM PC with the STD bus for multiprocessing
The advent of the Personal Computer into the technical world has, at an extremely reasonable expense and trouble, made available to us, considerable computational power. But, as it was with computers, the next logical step is to have multiple units running in concert, or, in other words, sharing …
-
Network performance simulation involving bus traffic
Master of Science (M.S.)
-
Integrated Floorplanning and Buffer Insertion for Bus-Based Microprocessor Designs
… to be a set of blocks connected through buses. Each bus consists of a large number of wires. Our floorplanner allocates the exact location and shape of the interconnect (both above and between the circuit blocks) and ensures routability as well as optimizes the timing goals. Our …
-
Applying Internet of Things principles to spacecraft
This thesis proposes the adaptation of the IEEE 1451 Transducer Electronic Data Sheet (TEDS) for usage in spacecraft subsystems. In the 1990s, TEDS initially were developed as a standardized method to provide metadata required for the operation of a transducer by a microcontroller or data …
-
The General Purpose Interface Bus
The General Purpose Interface Bus, as defined by the IEEE Standard, deals with systems that require digital data to be transferred between a group of instruments. An overview of this standard is presented which summarizes the interface's capabilities, functions and versatility by explaining the …
-
An Evaluation of the 8051 Microcontroller
With the increasing availability and use of 16-bit microprocessors, the 16-bit data bus and is becoming more prevalent. However, many peripheral devices such as printers and tape/disk drives still require an 8-bit data bus for their interface. This paper will explain how an Intel 8051 …
-
Multi-Computer Communication with Crossbar Switches
This thesis describes the design and implementation of a MC6809 multi-computer communication system, which includes a hardware communication controller, with emphasis on the system's software development. A communication program written in 6809 assembly language has been developed to interface each …
-
A Peripheral Subsystem Optimized for Computer Image Generation Applications
… these requirements. Industry standard peripheral buses and protocols are evaluated. A peripheral subsystem, compatible with this new front-end processor architecture, is proposed. The Intelligent Peripheral Interface is selected as the optimum peripheral subsystem for computer image generation …