Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 111 for “"Microelectronic packaging"”.
-
Dynamic material characterisation of solder interconnects in microelectronic packaging
An Investigation of quasi-static and dynamic properties of Sn-37Pb solder and two lead-free solder materials, Sn-3.5Ag and Sn-3.8Ag-0.7Cu was carried out using the split Hopkinson pressure bar (SHPB). Each solder was cast at three different cooling rates (slow cooling, moderate cooling and quench …
-
Carbon nanotubes for thermal interface materials in microelectronic packaging
… cooling has become more and more important in microelectronics. To address the thermal dissipation issue, one important solution is to develop thermal interface materials with higher performance. Carbon nanotubes, given their high intrinsic thermal and mechanical properties, and their high …
-
A reliable copper wire bond interface for microelectronic packaging
… of interconnects that are a failure mechanism in microelectronics. However we always must keep in mind that the intermetallic failure mechanism should not be exchanged for a different failure mechanism with a greater failure rate. It is essential to the total copper solution to develop a reliable …
-
Electroplated Compliant High-Density Interconnects For Next-Generation Microelectronic Packaging
Dramatic advances are taking place in the microelectronic industry. The feature size continues to scale down and it is expected that the minimum feature size on the integrated circuit is expected to reach 9 nm by 2016, and there will be more than 8 billion transistors on a 310 cm² chip, according …
-
Cohesive zone modeling for predicting interfacial delamination in microelectronic packaging
… have investigated interfacial cracking in microelectronic packages using fracture mechanics, which requires knowledge of starter crack locations and crack propagation paths. Cohesive zone theory has been identified as an alternative method for modeling crack propagation and delamination …
-
Short time scale thermal mechanical shock wave propagation in high performance microelectronic packaging configuration
… mechanical wave propagation in high performance microelectronic packages. Application of a Gaussian heat source of spectral profile similar to high performance devices was shown to induce rapid thermal and mechanical transient phenomena. The stresses and temporal gradient of stresses (power …
-
Design guidelines and synthesis of a low dielectric constant inorganic composite for high performance microelectronic packaging
This thesis is on theoretical and experimental studies of a controlled porosity inorganic composite using hollow ceramic microspheres. It evaluated the microsphere geometry issues and physical/electrical properties important to achieving a maximum reduction of the dielectric constant of the …
-
Vibration analysis of electroplated copper compliant interconnects
Microelectronic packaging interconnects are subjected to mechanical damage due to thermal and power cycles, drop impact shock, and various vibration loads during application. As traditional microelectronic packaging interconnects are rigid, compliant interconnects are being pursued to facilitate …
-
Synthesis of tin, silver and their alloy nanoparticles for lead-free interconnect applications
… temperature lead-free interconnect materials for microelectronic packaging applications with an emphasis on fundamental studies of nanoparticles synthesis, dispersion and oxidation prevention, and nanocomposites fabrication. Oxide-free tin (Sn), tin/silver (96.5Sn3.5Ag) and tin/silver/copper …
-
Development of a fatigue-compatible cohesive zone method for a copper-epoxy molding compound bimaterial interface
… delamination is a prevalent failure mechanism in microelectronic packages. While much work has been performed towards understanding fracture of bimaterial interfaces under monotonic loading, investigation focused on the impact of fatigue loading on such structures is still evolving. …
-
Electrical Performance Analysis of a Novel Embedded Chip Technology
… limitations to meet the demand for increasing packaging density. The embedded die technology can be successfully utilized to develop flexible printed circuits that will satisfy the demand for reliable and high density packaging. With a tremendous application potential in wearable and disposable …
-
An approach for impression creep of lead-free microelectronic solders
Currently, the microelectronics industry is transitioning from lead-containing to lead-free solders in response to legislation in the EU and Japan. Before an alternative alloy can be designated as a replacement for current Pb-Sn extensive testing must be accomplished. One major characteristic of …
-
Experimental and Numerical Thermal Analysis for Advanced Flip Chip Thermo-Compression Bonding via CMOS Microsensor Arrays and Finite Element Modelling
… relies on uniform thermal distribution during microelectronic packaging processes to ensure reliable interconnects are formed. During any TCB processes, the thermal application must uniformly distribute heat in order to produce robust, thoroughly bonded packages without being damaged due to …
-
Dependence of stress and morphology of sputtered copper films on deposition conditions
… coating) process in chip manufacturing and packaging. Since most sputtered coatings are in a state of stress, understanding the origin of stress is very important. High stress can lead to electrical shorts and mechanical instability in a microelectronic circuit pattern. The purpose of this …
-
Novel Low Temperature Cofired Ceramic Manufacturing Techniques for a Magnetron Field Emission Cathode
… a material system that is ideal for integrated microelectronic packaging technology, because of its rapid prototyping and easy integration of passive components such as resistors, capacitors, and conductors. LTCC’s electrical properties makes it especially suitable for high frequency …
Page 1 of 6