Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 12 of 12 for “"Microelectronics Cooling"”.

  1. DESIGN AND OPTIMIZATION OF PERISTALTIC MICROPUMPS USING EVOLUTIONARY ALGORITHMS

    … Possible applications of these pumps are in microelectronics cooling and drug delivery. Based on the results obtained from the fluid–structure interaction analysis, three optimized geometries result in flow rates which match the predicted flow rates with 95% accuracy. These geometries need …

    vcu Repository record for DESIGN AND OPTIMIZATION OF PERISTALTIC MICROPUMPS USING EVOLUTIONARY ALGORITHMS (opens in a new tab)

  2. Effective Thermal Conductivity of Composite Fluidic Thermal Interface Materials

    … used as a thermal interface material (TIM) in microelectronics cooling applications. A fundamental problem which remains to be addressed is how to predict the effective thermal conductivity of these materials, an important parameter in establishing the bulk resistance to heat flow through the …

    waterloo Repository record for Effective Thermal Conductivity of Composite Fluidic Thermal Interface Materials (opens in a new tab)

  3. Micro/nano scale surface roughness tailoring and its effect on microfluidic flow

    … delivery to the microscale energy harvesting, microelectronics cooling, requires an understanding of microfluidic flow. Surface roughness, even at micro and nano scale, both deterministic and random, is considered an important parameter to affect fluid flow at the microscale. Over the past …

    iastate Repository record for Micro/nano scale surface roughness tailoring and its effect on microfluidic flow (opens in a new tab)

  4. INVESTIGATION OF THERMOPHYSICAL AND DIELECTRIC PROPERTIES IN SEMICONDUCTORS AND POLYMER COMPOSITES

    … management, ranging from power transmission to microelectronics cooling. The third chapter expands on our consideration of electrical insulation to be applied to unconventional environments. The extremely low frequency (ELF) and very low frequency (VLF) ranges are attractive for uses in high …

    cornell Repository record for INVESTIGATION OF THERMOPHYSICAL AND DIELECTRIC PROPERTIES IN SEMICONDUCTORS AND POLYMER COMPOSITES (opens in a new tab) Embargoed until 2027-09-09

  5. Thermal management of 3-D stacked chips using thermoelectric and microfluidic devices

    … and experimental methods to explore hotspot cooling and high heat flux removal from a 3-D stacked chip using thermoelectric and microfluidic devices. Stacked chips are expected to improve microelectronics performance, but present severe thermal management challenges. The thesis provides an …

    gatech Repository record for Thermal management of 3-D stacked chips using thermoelectric and microfluidic devices (opens in a new tab)

  6. Thermal management of three-dimensional integrated circuits using inter-layer liquid cooling

    … test-bed for evaluating a 3D inter-layer liquid cooling platform is developed. Experimental thermal testing results for an air-cooled chip and a liquid-cooled chip are compared. Microchannel heat sink cooling shows a significant junction temperature and heat sink thermal resistance reduction …

    gatech Repository record for Thermal management of three-dimensional integrated circuits using inter-layer liquid cooling (opens in a new tab)

  7. Stacked Microchannel Heat Sinks for Liquid Cooling of Microelectronics Devices

    … heat sink was developed to provide efficient cooling for microelectronics devices at a relatively low pressure drop while maintaining chip temperature uniformity. Microfabrication techniques were employed to fabricate the stacked microchannel structure, and experiments were conducted to study …

    gatech Repository record for Stacked Microchannel Heat Sinks for Liquid Cooling of Microelectronics Devices (opens in a new tab)

  8. A Flexible 3D Architecture for Cooling Future Generation Devices

    … To tackle these challenges, innovative liquid cooling technologies and high-speed thermal diagnostic systems must be developed simultaneously. Active and passive pulsation-liquid-cooling techniques are currently an attractive thermal management solution. In an active cooling mode, the influence …

    ucf Repository record for A Flexible 3D Architecture for Cooling Future Generation Devices (opens in a new tab)

  9. Engineering the Surface Chemistry and Surface Conditions to Optimize the Heat Removal Rate of Various Surfaces

    … smaller electronics rise, the need for creative cooling solutions to prevent burnout becomes increasingly paramount. In response to recent cooling needs, new cooling techniques, such as jet impingement cooling, spray cooling, and heat pipes, have risen in popularity for their simple design and …

    ucf Repository record for Engineering the Surface Chemistry and Surface Conditions to Optimize the Heat Removal Rate of Various Surfaces (opens in a new tab)

  10. Hotspot Cooling Performance for Confined Jet Impingement Cooling

    The current trend in microelectronics is to manufacture devices with increased computational powers and reduced size. These devices with increased power densities are consequently subject to extreme thermal loads. Thermal management of these power loads is extremely challenging. The presence of the …

    ucf Repository record for Hotspot Cooling Performance for Confined Jet Impingement Cooling (opens in a new tab)

  11. Heat Transfer Characterization of Supercritical Carbon Dioxide in Microchannel

    … rise to the need for aggressive and effective cooling systems. The rapid growth of microfabrication technology has led to the development of microelectromechanical system (MEMS) based microchannels, which can be used as miniaturized heat exchangers capable of cooling high power electronic …

    ucf Repository record for Heat Transfer Characterization of Supercritical Carbon Dioxide in Microchannel (opens in a new tab)

  12. Microchannel fluid flow in a silicon chip

    … was determined and ranged from 19 to 25.1. Micro-cooling channels have the potential to enhance heat removal in silicon chips, thus enabling the chips to run cooler and faster than presently possible. Wagner (1992) used the experimental apparatus designed in this study to perform additional …

    ucf Repository record for Microchannel fluid flow in a silicon chip (opens in a new tab)