Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 12 of 12 for “"Microelectronics Research"”.

  1. Design, development and fabrication of circuits using the CMOS-70 process

    … capabilities at the Iowa State University's Microelectronics Research Center have recently been expanded significantly to include CMOS processing. Intended for academic lab use as well as to provide the flexibility of fabrication using more modern processing, the CMOS-70 process will be a …

    iastate Repository record for Design, development and fabrication of circuits using the CMOS-70 process (opens in a new tab)

  2. Improving the light-induced degradation of hydrogenated amorphous silicon solar cells using fabrication at elevated temperatures and low pressure

    … samples were fabricated and measured at the Microelectronics Research Center at Iowa State University. Devices were made using a single chamber plasma-enhanced chemical vapor deposition (PECVD) reactor operating at 45MHz. Standard measurements included current versus voltage, external quantum …

    iastate Repository record for Improving the light-induced degradation of hydrogenated amorphous silicon solar cells using fabrication at elevated temperatures and low pressure (opens in a new tab)

  3. Design of an optical microelectromechanical-system microphone with sub 15-dBA noise floor

    This research work presents the modeling, fabrication, and characterization of the optical microphone. The optical microphone detects diaphragm displacement due to input sound pressure, using an interferometric-based displacement detection scheme instead of using capacitive readout technique, which …

    texas Repository record for Design of an optical microelectromechanical-system microphone with sub 15-dBA noise floor (opens in a new tab)

  4. A simple p-well CMOS fabrication process

    <p>This research focused on the development of a p-well CMOS fabrication process that has fast turnaround time, is relatively inexpensive, and is easy to use. Most current CMOS fabrication processes use either n-well or twin-well techniques in order to provide better device isolation and improved …

    iastate Repository record for A simple p-well CMOS fabrication process (opens in a new tab)

  5. In situ monitoring of reactive ion etching using a surface micromachined integrated resonant sensor

    This research explores a novel in-situ technique for monitoring film thickness in the reactive etching process that incorporates a micromachined sensor. The sensor correlates film thickness with changes in resonant frequency that occurs in the micromachined platform during etching. The sensor …

    gatech Repository record for In situ monitoring of reactive ion etching using a surface micromachined integrated resonant sensor (opens in a new tab)

  6. The development of layered photonic band gap structures using a micro-transfer molding technique

    … and technology have become an important area of research because of the numerous possible applications ranging from high-efficiency laser diodes to optical circuitry. This research concentrates on reducing the length scale in the fabrication of layered photonic band gap structures and developing …

    iastate Repository record for The development of layered photonic band gap structures using a micro-transfer molding technique (opens in a new tab)

  7. Ανάπτυξη μικρομετρικών τρανζίστορ εγκάρσιου πεδίου από καρβίδιο του πυριτίου (SiC)

    … similar TCADs. The TSI-VJFET was built in the Microelectronics Research Group (MRG) of FORTH Crete (FORTH). For a proper description of the operation of the transistor, the correct description of its DC operation is of paramount importance. Theoretically, the intrinsic transistor should be …

    greece Repository record for Ανάπτυξη μικρομετρικών τρανζίστορ εγκάρσιου πεδίου από καρβίδιο του πυριτίου (SiC) (opens in a new tab)

  8. Variable Frequency Microwave Reflow of Lead-Free Solder Paste

    … eliminating lead from consumer products, the microelectronics industry has put effort into developing lead-free solder paste. The major drawback of lead-free solder is the problems caused by its high reflow temperature. Variable frequency microwave (VFM) processing has been shown to allow some …

    gatech Repository record for Variable Frequency Microwave Reflow of Lead-Free Solder Paste (opens in a new tab)

  9. Densely integrated photonic structures for on-chip signal processing

    Microelectronics has enjoyed great success in the past century. As the technology node progresses, the complementary metal-oxide-semiconductor scaling has already reached a wall, and serious challenges in high-bandwidth interconnects and fast-speed signal processing arise. The incorporation of …

    gatech Repository record for Densely integrated photonic structures for on-chip signal processing (opens in a new tab)

  10. Silicon-germanium BiCMOS and silicon-on-insulator CMOS analog circuits for extreme environment applications

    Extreme environments pose major obstacles for electronics in the form of extremely wide temperature ranges and hazardous radiation. The most common mitigation procedures involve extensive shielding and temperature control or complete displacement from the environment with high costs in weight, …

    gatech Repository record for Silicon-germanium BiCMOS and silicon-on-insulator CMOS analog circuits for extreme environment applications (opens in a new tab)

  11. Simulation and process development for ion-implanted N-type silicon solar cells

    … This study examines the literature in solar and microelectronics research to identify features of ion implant and anneal processes which are pertinent to solar cell processing. It is found that the Monte Carlo ion implant models used in IC fabrication optimization are applicable to solar cell …

    gatech Repository record for Simulation and process development for ion-implanted N-type silicon solar cells (opens in a new tab)

  12. Cohesive zone modeling for predicting interfacial delamination in microelectronic packaging

    Multi-layered electronic packages increase in complexity with demands for functionality. Interfacial delamination remains a prominent failure mechanism due to mismatch of coefficient of thermal expansion (CTE). Numerous studies have investigated interfacial cracking in microelectronic packages …

    gatech Repository record for Cohesive zone modeling for predicting interfacial delamination in microelectronic packaging (opens in a new tab)