Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 21 for “"Microfluidic cooling"”.

  1. Microfluidic cooling for densely integrated microelectronic systems

    … microfabrication, and characterization of microfluidic cooling technologies. In addition to thermally characterizing microfluidic heat sink designs in passive silicon, a microfluidic heat sink has been attached to a 2.5D 14 nm FPGA and integrated into the backside of a 28 nm FPGA, where …

    gatech Repository record for Microfluidic cooling for densely integrated microelectronic systems (opens in a new tab)

  2. Hybrid microfluidic cooling and thermal isolation technologies for 3D ICs

    … with multiple high-power tiers, an effective cooling solution that scales with the number of dice in the stack is needed. Second, in the heterogeneous integration, an effective thermal isolation solution is needed to ‘protect’ the low-power tier from the high-power tier. This research focuses …

    gatech Repository record for Hybrid microfluidic cooling and thermal isolation technologies for 3D ICs (opens in a new tab)

  3. 3D and 2.5D heterogeneous integration platforms with interconnect stitching and microfluidic cooling

    … To address the thermal challenges, embedded microfluidic cooling was proposed and two testbeds were fabricated and characterized with two-phase cooling. The maximum heat transfer coefficient was up to 60 kW/m2K. To avoid the shortcomings of conventional heterogeneous integration technologies, …

    gatech Repository record for 3D and 2.5D heterogeneous integration platforms with interconnect stitching and microfluidic cooling (opens in a new tab)

  4. Power distribution network modeling and microfluidic cooling for high-performance computing systems

    A silicon interposer platform with microfluidic cooling is proposed for high-performance computing systems. The key components and technologies for the proposed platform, including electrical and fluidic microbumps, microfluidic vias and heat sinks, and simultaneous flip-chip bonding of the …

    gatech Repository record for Power distribution network modeling and microfluidic cooling for high-performance computing systems (opens in a new tab)

  5. Modelling and characterisation of cryogenic coolants in additively manufactured microfluidic cooling channels

    … present Thesis, computational investigations of microfluidic channel flows for various high-relevance engineering applications are performed. Initially, a numerical framework is implemented to overcome the limitations of the pseudo-compressibility method in strongly viscous, microfluidic channel …

    greece Repository record for Modelling and characterisation of cryogenic coolants in additively manufactured microfluidic cooling channels (opens in a new tab)

  6. Silicon microsystem platform with integrated microfluidic cooling and low-loss through-silicon vias

    Microfluidic cooling technology is a promising thermal solution for high-performance three-dimensional (3-D) microsystems. However, the integration of microfluidic cooling into 3-D microsystems inevitably impacts tier-to-tier through-silicon vias (TSVs) by increasing their length and diameter (for …

    gatech Repository record for Silicon microsystem platform with integrated microfluidic cooling and low-loss through-silicon vias (opens in a new tab)

  7. Three-dimensional microfabrication technologies for electronic and lab-on-chip applications

    … limited by through-silicon-via (TSV) density and cooling challenges. To enable fine-grain 3D-ICs, high aspect-ratio sub-micron diameter (~920 nm) TSV technology is demonstrated. To address cooling challenges and pronounced thermal wall limits in 3D-IC technology, a monolithic microfluidic cooling …

    gatech Repository record for Three-dimensional microfabrication technologies for electronic and lab-on-chip applications (opens in a new tab)

  8. Thermal Isolation of High Power Devices in Heterogeneous Integration

    … is in contrast to the alternative scenario of cooling the entire package to the maximum reliable temperature of the most sensitive devices. This isolation strategy must be implemented without a significant increase in device interconnect distances. A counter-intuitive approach is to seek …

    maryland Repository record for Thermal Isolation of High Power Devices in Heterogeneous Integration (opens in a new tab)

  9. DENSE INTERCONNECTION AND ADVANCED COOLING TECHNOLOGIES FOR 2.5D AND 3D HETEROGENEOUS INTEGRATED CIRCUITS

    … Cu-Cu direct bonding. Secondly, the compute and cooling efficiency benefits of silicon-integrated monolithic microfluidic cooling were investigated on a high-power functional CPU running real-world benchmarks. Next, the technology was scaled to 2.5D architectures and was evaluated on an Intel …

    gatech Repository record for DENSE INTERCONNECTION AND ADVANCED COOLING TECHNOLOGIES FOR 2.5D AND 3D HETEROGENEOUS INTEGRATED CIRCUITS (opens in a new tab)

  10. Transport Characteristics of Pin Fin Enhanced Microgaps under Single and Two Phase Cooling

    Microfluidic convection cooling is a promising technique for future high power microprocessors, radio-frequency (RF) transceivers, solid-state lasers, and light emitting diodes (LED). Three-dimensional (3D) stacking of chips is a configuration that allows many performance benefits. A microgap with …

    gatech Repository record for Transport Characteristics of Pin Fin Enhanced Microgaps under Single and Two Phase Cooling (opens in a new tab)

  11. Thermal and power delivery network modeling for emerging microelectronic integration platforms

    … structure is proposed using interposer embedded microfluidic cooling and air gap isolation. To understand the thermal design constraints of 2.5-D integration, thermal exploration is performed for three approaches of 2.5-D integration. Moreover, the impact of several different technology …

    gatech Repository record for Thermal and power delivery network modeling for emerging microelectronic integration platforms (opens in a new tab)

  12. A Silicon and Silicon Carbide Bonding Methodology for Cooling High Heat Flux Electronics

    … silicon and siliconcarbide substrates used in microfluidic cooling devices for high-heat-flux electronics. As power densities in computer chips increase, cooling devices with small, complex structures need to be developed. Silicon and silicon carbide are two of the most popular material choices …

    maryland Repository record for A Silicon and Silicon Carbide Bonding Methodology for Cooling High Heat Flux Electronics (opens in a new tab)

  13. A Multi-physics approach to the co-design of 3D multi-core processors

    … co-design, which co-optimizes advanced microfluidic cooling with processor floorplan and power map and develops two high-performance thermally-adaptive processor designs for a given thermal cap. The second focuses on a power-architecture co-design, which minimizes the voltage guardband …

    gatech Repository record for A Multi-physics approach to the co-design of 3D multi-core processors (opens in a new tab)

  14. Computational modeling and experimental validation of single phase and boiling flows in microgap cooling layers

    … of the available volume for heat dissipation. Microfluidic interlayer cooling is a feasible solution for the thermal management of such devices, but several challenges remain to achieve a comprehensive solution that is compatible with electrical, structural, thermal, and hydraulic …

    gatech Repository record for Computational modeling and experimental validation of single phase and boiling flows in microgap cooling layers (opens in a new tab)

  15. Investigation of Cryo-Cooled Microcoils for MRI

    … the thermal noise generated in the copper. Cryo-cooling is a potential technique to reduce thermal noise in microcoils, thereby recovering SNR. In this research, copper microcoils of two different geometries have been cryo-cooled using liquid nitrogen. Quality-factor (Q) measurements have been …

    tamu Repository record for Investigation of Cryo-Cooled Microcoils for MRI (opens in a new tab)

  16. Modeling Two-Phase Flow and Heat Transfer in Polygonal Microchannels

    Microfluidics is a burgeoning research area with applications ranging from microfluidic cooling to biomolecule synthesis. Here we study two problems to gain an improved understanding of two-phase flow and heat transfer in microfluidic devices. We also study a third problem on boundary layer flow …

    lsu-thes Repository record for Modeling Two-Phase Flow and Heat Transfer in Polygonal Microchannels (opens in a new tab)

  17. Electrical-thermal modeling and simulation for three-dimensional integrated systems

    … behaviors, (c) efficient modeling of microfluidic cooling, and (d) the demand of performing fast thermal simulation with varying design parameters. Addressing these challenges for the electrical/thermal modeling and analysis of 3D systems necessitates the development of novel numerical …

    gatech Repository record for Electrical-thermal modeling and simulation for three-dimensional integrated systems (opens in a new tab)

  18. Titanium Dioxide Based Microtubular Cavities for On-Chip Integration

    … of multiple photonic layers and (ii) to make microfluidic cooling system in the integrated optoelectronic system. Based on this motivation, this PhD research is devoted to the demonstration and the implementation of monolithic integration of VRU-MRRs with photonic waveguides for 3D photonic …

    qucosa-diss

  19. Thermomechanical modeling and brittle interface characterization for on-chip fluidic cooler in microelectronic packages

    … goal of this work is to develop a reliable microfluidic architecture for high heat-flux microelectronic applications by experimentally characterizing glass-silicon interface. This is achieved through an innovative technique and by employing numerical simulations and analytical models to …

    gatech Repository record for Thermomechanical modeling and brittle interface characterization for on-chip fluidic cooler in microelectronic packages (opens in a new tab)

  20. Electrospray and Superlens Effect of Microdroplets for Laser-Assisted Nanomanufacturing

    … by the total internal reflection principle. A microfluidic cooling effect can also contribute to creating subwavelength features. In summary, this work describes a new laser-assisted additive manufacturing process for the fabrication of nanodots and microlayers using nanoparticles of different …

    ucf Repository record for Electrospray and Superlens Effect of Microdroplets for Laser-Assisted Nanomanufacturing (opens in a new tab)

Page 1 of 2