Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 28 for “"Microgap"”.
-
LIMITS OF THIN FILM COOLING IN MICROGAP CHANNELS
… a chip and a non-silicon polymer cover in a microgap cooler. These microgap configurations provide direct contact - and hence cooling - between a chemically-inert, dielectric liquid and the back surface of an active electronic component, thus eliminating the significant thermal resistance …
-
LOCAL AND GLOBAL DRYOUT IN TWO-PHASE MICROGAP COOLING
… immersion cooling, micro heat pipes, and microgap cooler. Unlike many current thermal management devices, microgap cooler eliminate the high and problematic thermal contact resistance, by allowing direct cooling of an electronic component by the flow of dielectric liquid across the back …
-
Flow boiling of water in pin-fin enhanced microgap
… mass fluxes, and inlet fluid temperatures. Two microgaps with the same height of 200 μm, one with sparse pin fins, and the other with dense pin fins, were studied and compared. The transverse and longitudinal pitches were both 400 μm for the microgap with sparse pin fins, and were both 200 μm …
-
Microgap Structured Optical Sensor for Fast Label-free DNA Detection
… resulting from hybridization event. First, a microgap structure based IFPI sensor is fabricated with simple etching and splicing technology. Subsequently, considering the sugar phosphate backbone of DNA, layer-by-layer electrostatic self-assembly technique is adopted to attach the single …
-
TWO-PHASE FLOW REGIMES AND HEAT TRANSFER IN A MANIFOLDED-MICROGAP
… at relatively high velocities through U-shaped microgap channels, producing centripetal acceleration forces on the fluid that can be several orders of magnitude larger than gravity. Furthermore, the manifolded microchannels consist of high aspect ratio rectangular channels, short length to …
-
Extreme microgap based hotspot thermal management with convective boiling of refrigerant
… “hotspots”. Convective boiling heat transfer in microgap heat sinks has the potential to dissipate ultra-high heat fluxes. This thesis presents an experimental investigation of heat transfer performance of three dedicated microgap coolers for hotspot thermal management. In this study, a …
-
Analysis of lubricant flows within the microgap of rotary lip seals.
The study of a thin, incompressible Newtonian fluid layer trapped between two almost parallel, sliding surfaces has been actively pursued in the last decades. This subject includes lubrication applications such as slider bearings or the sealing of non-pressurized fluids with rotary lip seals. When …
-
CHARACTERISTICS INVESTIGATION AND PARAMETRIC STUDY OF FLOW BOILING IN MICROGAP HEAT SINK
Flow boiling in microgap offers several advantages, such as extremely high heat transfer rate in compact space with a smaller coolant flow rate, greater temperature uniformity across the heat sink and ease of fabrication and implementation. The objectives of this investigation on flow boiling in …
-
Controlled electrochemical synthesis of single one-dimensional metal nanochains across microgap electrodes.
This study mainly focuses on the fabrication of single one dimensional (1D) NP chains across the 5-micron gap of Au two electrode devices (TED). This has been achieved by electrochemical deposition of Ag onto the two electrodes, soaking the TED in 0.1 M Cetyltrimethyl ammonium bromide for 2-3 …
-
Experimental Simulation of Nucleating Bubble Behavior in a Microgap with Air Injected Bubbles
… bubbles created by air injection under a tapered microgap. It is a continuation of previous work from the Thermal Analysis and Microfluidics Lab at RIT which showed that placing a tapered gap manifold over a heated surface in a pool boiling setup could direct the flow of vapor created by two-phase …
-
Study of Dual-Tapered Manifold Microgap Spacing and Taper Angle on Pool Boiling Characteristics
The miniaturization of electronic components has resulted in higher heat generation on a smaller surface area, creating a desire for better heat removal techniques and systems. To improve the performance of the pool boiling system, high critical heat flux and low surface temperatures are desired …
-
Enhancing Single and Two-Phase Heat Transfer of Microgap Heat Sinks Using Nano-Structure Coatings
… Among them, flow boiling in microchannels or a microgap has been one of the most efficient ways to remove high heat flux, which requires less coolant compared with single-phase cooling techniques. However, the flow boiling instability is the one of the most challenging issues, which lead to the …
-
Computational modeling and experimental validation of single phase and boiling flows in microgap cooling layers
The microelectronics industry has been driven by the trends of miniaturization and increased functionality; however, the complexities of processing as the physical limits of silicon are being reached have prompted the research of alternatives. The three-dimensional stacking of integrated circuits …
-
Characterization and Modeling of Two-Phase Heat Transfer in Chip-Scale Non-Uniformly Heated Microgap Channels
A chip-scale, non-uniformly heated microgap channel, 100 micron to 500 micron in height with dielectric fluid HFE-7100 providing direct single- and two-phase liquid cooling for a thermal test chip with localized heat flux reaching 100 W/cm2, is experimentally characterized and numerically modeled. …
-
High Heat Flux Dissipation Using Innovative Dual Tapered Manifold in Pool Boiling, and Thermosiphon Loop for CPU Cooling in Data Centers
… approach is adopted by using a dual tapered microgap over the heated boiling surface for enhanced heat transfer. The theoretical work has identified the role of two-phase pressure recovery effect induced by the expanding bubbles in the tapered microgap configuration that leads to a …
-
Convection and Flow Boiling in Microgaps and Porous Foam Coolers
An open and foam-filled microgap cooler, providing direct liquid cooling for a simulated electronic/photonic component and which eliminates the problematic thermal resistance of the commonly-used thermal interface material (TIM), is examined. The single phase heat transfer and pressure drop results …
-
Lab-On-Chip for Ex-Vivo Study of Bio-Mechanical-Chemical Behavior of Tip Growing Plant Cells
… pollen tube, microstructural elements such as microgaps and microcantilevers to provide Ex-Vivo environment for characterizing static and dynamic responses of pollen tubes. A Lab-On-Chip (LOC), called, TipChip was developed as a flexible platform that can simplify sophisticated functions such …
-
Analyzing Heat Transfer Mechanisms in Tapered Microgaps and Film Boiling With Computational Modeling Incorporating Nucleation Sites and Subcooled Fluids
… boiling, and confined boiling in tapered microgaps using customized Ansys Fluent with user-defined functions (UDFs) for sharp interface tracking and temperature-gradient-driven mass transfer. In film evaporation, the peak local heat transfer coefficient (HTC) reached 2170 W/(m²·K) at 0.5 …
-
The effect of wetting transparency on the interfacial phenomena between water and solid surfaces: An atomistic modeling investigation
… flow delivery systems, low friction nano- and microgap bearings, etc., by means of tailoring the properties of the interfaces in order to achieve low friction flows or highly conductive solid-liquid interfaces.
-
Miniature fiber-optic multicavity Fabry-Perot interferometric biosensor
… sensing. Both the tubing-based MFPI sensor and microgap MFPI sensor provide simple, yet high performance solutions for thin-film sensing. The temperature dependence of the sensing cavity is compensated by extracting the temperature information from a second multiplexed cavity. This provides the …
Page 1 of 2