Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 712 for “"Micromechanical"”.
-
Micromechanical Modelling of Polyethylene
… numerical implementation of a three-dimensional micromechanical model for crystalline polyethylene. Based on the theory of shear slip on crystallographic planes, the proposed model is expressed in the framework of viscoplasticity coupled with degradation at large deformations. Earlier models aid …
-
Performance Parameters of Micromechanical Resonators
… of various flexural-mode and bulk-acoustic-mode micromechanical resonators are presented. Investigated parameters are quality factor (Q), pressure stability, power handling, nonlinearity, and temperature stability. Resonators studied in this work are electrostatically driven-and-sensed, and they …
-
Piezoelectrically-Transduced Silicon Micromechanical Resonators
This thesis reports on the design and fabrication of micro-electro-mechanical (MEM) resonators on silicon that are piezoelectrically-transduced for operation in the very high frequency (VHF) range. These devices have a block-type or beam-type design, and are designed to resonate in their in-plane …
-
Fabrication of SOI micromechanical devices
… and the fabrication process development of micromechanical silicon-on-insulator (SOI) devices. SOI is a promising starting material for fabrication of single crystal silicon micromechanical devices and basis for monolithic integration of sensors and integrated circuits. The buried oxide …
-
Micromechanical Modeling of Heterogeneous Dispersions
In this thesis, we present a theoretical study of the micromechanics of heterogeneous dispersions. Heterogeneous dispersions are distinguished by their statistical non-uniformity and the presence of one (or more) internal length scale over which the statistical properties of the dispersion vary. At …
-
Magnetic Transduction for RF Micromechanical Filters
… The use of Lorentz-force transduction for RF micromechanical filters proposed in this work is pursued by experimentally evaluating the transduction technique implemented for microfabricated designs. By fabricating single and coupled microresonators in a few different fabrication technologies, …
-
Micromechanical testing of oxidized grain boundaries
<p>Primary water stress corrosion cracking (SCC) of metals in pressurized water reactors (PWRs) is known to be one of the most challenging and cost intensive modes of failure in the nuclear industry. Even though it is known that cracking in Ni-base alloys proceeds mainly intergranular (IG), the …
-
Micromechanical Simulation for Fatigue Damage Incubation
Micromechanical simulations are conducted to quantify the influence of microstructure attributes to the formation of small fatigue cracks. Three wrought aluminum alloys (7075-T651, 2024-T3, virtual material) with fractured particle are studied to quantify the influence of material’s yield strength …
-
Micromechanical modeling of rough interface behavior
… surfaces was studied systematically based upon micromechanical modeling. Firstly, asperity contact mechanics was further developed. It was found that tangential tractions, displacement and compliance are path dependent in both in-plane and out-of-plane shear loading, which lead to energy …
-
Micromechanical characterization of ALD thin films
Atomic layer deposited (ALD) films have become essential for various microelectromechanical systems (MEMS) due to their excellent properties: ALD films are conformal, uniform, dense, and pin-hole free. The main requirement for any film to be applied in MEMS is to exhibit good mechanical properties. …
-
Micromechanical modeling of Dual-Phase steels
… is studied with regard to microstructure. A micromechanical modeling framework utilizing an axisymmetric representative volume element (RVE) is implemented in Abaqus. The RVE consists of a sphere representing the martensite, in a cylinder of ferrite. A single-phase material model describing …
-
Micromechanical resonator based bandpass sigma-delta modulator
… 2nd-order bandpass I#I? modulator based on micromechanical resonator is presented. The micromechanical resonator is used to replace its electronic counterpart for its high Q value. The design is based on pulse-invariant transform and multi-feedback technique. The proposed modulator is …
-
Modelling micromechanical damage of fusion reactor materials
Nuclear Fusion presents a promising long-term solution to global energy demands. However, the successful operation of a fusion reactor depends on developing advanced materials capable of withstanding extreme operational conditions. This thesis employs Finite Element Models (FEM) to study the …
-
Micromechanical testing of irradiated tungsten for fusion
… of strain rate (SR) and radiation damage through micromechanical testing of [001]-orientated unirradiated single crystal W and single crystal W irradiated to 1.67 dpa at 900 °C.</p> <p>Constant strain rate spherical nanoindentation experiments using 5 μm and 10 μm radius tips were executed at …
-
Micromechanical Modelling of Wood and Fibre Properties
… also studied in a preliminary way by means of micromechanical modelling. Three-dimensional finite element models of straight fibres of undeformed and of collapsed cross-sectional shape were involved. Both the force-displacement relationship and the moisture-induced deformations needed for …
-
Design and processing of micromechanical sensor devices
<p>A multi-purpose cantilever beam and microbridge accelerometer structure has been designed and fabricated in this work. This same structure with modification can be employed as a capacitive accelerometer, mechanical resonance accelerometer, and a piezoresist accelerometer. Surface …
-
Micromechanical modeling of concrete at early age
The focus of this research is a micromechanical characterization of Portland cement concrete at early age (less than 28 days). Concrete’s viscoelastic properties change significantly at early age due to solidification of its matrix component. Bažant’s solidification theory models concrete as a …
-
Micromechanical Modeling of Concrete at Early Age
The focus of this research is a micromechanical characterization of Portland cement concrete at early age (less than 28 days). Concrete's viscoelastic properties change significantly at early age due to solidification of its matrix component. Bazant's solidification theory models concrete as a …
-
Design and characterization of silicon micromechanical resonators
… that silicon is an excellent material for micromechanical resonators. The aim of this research is to explore the fundamental limitations, provide a foundation for future work, and also paint a clearer picture on how micromechanical resonators can complement alternative technologies.
Page 1 of 36