Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 23 for “"Micromechanical Testing"”.
-
Micromechanical testing of oxidized grain boundaries
… for lifting-out whole cantilevers after testing and for performing 3D focussed ion beam sequencing (3D FIB-SEM) while preserving a thin central region of the cantilever for further TEM sample preparation was developed and is presented.</p> <p>In lieu with recent efforts of the main …
-
Micromechanical testing of irradiated tungsten for fusion
… of strain rate (SR) and radiation damage through micromechanical testing of [001]-orientated unirradiated single crystal W and single crystal W irradiated to 1.67 dpa at 900 °C.</p> <p>Constant strain rate spherical nanoindentation experiments using 5 μm and 10 μm radius tips were executed at …
-
Micromechanical testing of two-dimensional aggregated suspensions of colloidal particles
Includes bibliographical references (pages 119-123).
-
Development of a micromechanical testing method for single wood fibres
Natural fibre-based materials are widely used in everyday life in the form of pa-per, paperboard, films, textiles and biocomposites. Environmental awareness andthe growing concern regarding the large energy consumption coupled to the pro-duction of traditional synthetic fibres have prompted several …
-
Micromechanical testing for the evaluation of chemo-mechanical alteration of CO₂ storage rocks
… two weeks. I designed and constructed a scratch testing apparatus to conduct scratches on the laboratory altered rock samples. Scratch toughness and hardness show decreases of up to 60% in the case of Entrada sandstone and 92% in the case of Summerville siltstone after CO2-induced alteration in …
-
INVESTIGATING THE FATIGUE BEHAVIOR OF INCONEL 939 AND INCONEL 718 THROUGH MICROMECHANICAL TESTING
A detailed evaluation of fatigue crack growth (FCG) in a silicon-modified Inconel 939 alloy, fabricated via laser powder bed fusion additive manufacturing (L-PBF AM), was performed using cyclic bending tests on pre-notched microscale cantilevers with a cross-sectional dimension of 25 µm × 25 µm. To …
-
Micromechanical Testing of Pristine and Delithiated Single Carbon Fibres for Structural Battery Composite
Reduction of mass of the battery system in electric vehicles (EV) is one of the major requirements of the use of EV in place of internal combustion (IC) engines. A novel solution to reduce the mass of the system is by replacing the present battery material with multifunctional material. These are …
-
Development of Micromechanical Testing Methods for Spent AGR Cladding to Examine Effects of Sensitisation and Stress Corrosion Cracking
Spent Advanced Gas-Cooled Reactor (AGR) fuel is interim stored in cooling ponds, and the fuel cladding may suffer from Stress Corrosion Cracking (SCC) due to the combination of the Radiation-Induced Segregation (RIS) and the corrosive environment in the pond. This thesis presents a better …
-
Experimental Investigation of Micro and Macro Mechanics of Carbon Fiber Composites and Their Relationship
… conventional tensile, compressive and shear testing of specimens as per relevant standards, whereas the micromechanics part involves indentation of fibers and matrix to estimate the bonding strength of the fiber/matrix, which is a very important parameter for the behavior of composite, and …
-
High resolution characterisation of H on stress corrosion cracking in nuclear materials
… in SCC. Localised and high-resolution testing has been employed successfully to characterise key processes in SCC crack propagation. For this reason, nanoindenta- tion, transmission Kikuchi diffraction (TKD), NanoSIMS and Thermal desorption spectrscopy (TDS) have been used to …
-
Particle Friction, Breakage, and Damage: Deformation Mechanisms of Brittle Granular Materials
… a granular material was examined using a new micromechanical testing apparatus to study smooth and rough soda lime glass particles in carefully controlled dry, humid, and lubricated environments during normal compression and shearing. The breakage of granular particles was studied across …
-
Radiation Response, Mechanical Property Changes, and Corrosion Behavior of Molten Salt Reactor Materials
… N was exposed to light ion irradiation, micromechanical testing, and immersion corrosion using FLiNaK molten salt after either irradiation or static strain mounting using the three-point bending technique. 316SS, either coated using a modified cathodic cage plasma nitriding technique or …
-
Investigating Fuel Cladding Coating Materials for Accident Tolerant Fuels
… via cold spraying. This study utilized various testing methods, including accelerator irradiation, SEM imaging, TEM imaging, micropillar compression, nanoindentation, and cantilever bending. The research performed is necessary for confirming phase diagram predictions, creating kinetic data to …
-
Investigation of key challenges facing aerogel composites development through multiscale approach
… composite mechanical response. Additionally, micromechanical testing of the interface between aerogel and fibre reinforcement has been performed for the first time to understand their bonding ability. By designing a method to deposit an aerogel droplet surrounding the fibre, the microbond …
-
Microscale evaluation of epoxy matrix composites containing thermoplastic healing agent
… (3) study the potential for self-healing through micromechanical testing. The effect of a 10 wt.% EMAA modified epoxy was investigated through infrared spectroscopy and differential scanning calorimetry (DSC) experiments. The results suggested that EMAA addition may cause changes during the epoxy …
-
Characterizing Structure, Properties, and Deformation in Metallic Glasses and Olivine Using Instrumented Nanoindentation
Micro- and nanomechanical testing can provide significant insight about the structure, properties, and behavior of materials. These techniques are nondestructive, require only limited amounts of material, and have been known to detect a brittle-to-ductile transition in mechanical behavior due to a …
-
REAL-TIME MONITORING OF DISLOCATION AVALANCHES IN METALS: AN INTEGRATED IN SITU MICROCOMPRESSION AND ACOUSTIC EMISSION STUDY
… the integration of in situ microcompression testing and acoustic emission (AE) techniques. The primary objective was to develop a deeper understanding of the underlying dynamics of dislocation motion by studying strain burst behavior. This novel approach allowed for capturing a wider spectrum …
-
An exploration of the link between vertebral endplate fracture, velocity, and health of the intervertebral disc.
… of relatively few participants. In-vitro tissue testing has demonstrated that pressurization of the intervertebral disc’s nucleus pulposus significantly contributes to the generation of growth plate fractures. However, a comprehensive biomechanical investigation of the mechanical consequences for …
-
On the relationship between microstructure mechanical properties and weld metal hydrogen assisted cold cracking
… advanced characterisation and micro-mechanical testing techniques to evaluate the fundamental link between microstructure, mechanical properties and HACC susceptibility for individual weld metal microstructural constituents. This first part of the work examined the microstructure and mechanical …
-
Mechanical and Histological Characterization of Porcine Aortic Valves under Normal and Hypercholesterolemic Conditions
Calcific aortic valve disease (CAVD) is associated with significant cardiovascular morbidity. While late-stage valve disease is well-described, there remains an unmet scientific need to elucidate early pathobiological processes. In CAVD, pathological differentiation of valvular interstitial cells …
Page 1 of 2