Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 40 for “"Micromotor"”.
-
Rotary micromotor design with IC-compatible processing
… rotor and stator configurations. All of these micromotors operate with an electrostatic power source and have rotor diameters varying from 0.2 to 0.4 mm. These micromotors develop torques in the range 8 to 50 picoNewtons with rotors of polysilicon with 2 micron film thickness based on the …
-
Modeling and simulation of magnetic micromotor performance
… optimize geometries for two types of magnetic micromotors: yoke-type (YTMM) and yokeless (YSMM). The two selected micromotor types matched the designs that have been described in the recent research literature. Modeling was accomplished using MAXWELL, an advanced 2-D and 3-D simulator. The …
-
Custom-Designed Biohybrid Micromotor for Potential Disease Treatment
Micromotors are recognized as promising candidates for untethered micromanipulation and targeted cargo transport. Their future application is, however, hindered by the low efficiency of drug encapsulation and their poor adaptability in physiological conditions. To address these challenges, one …
-
A ferrofluid-assisted planar micromotor for endoscopic multimodal imaging
Optical endoscopy is a common technique for diagnosing and treating disease given its ability to analyze tissue in real time and in a non-destructive manner. There are many different imaging modalities used in endoscopes, with common ones being white light endoscopy, optical coherence tomography …
-
A programmable integrated power supply for the electrostatic-drive micromotor
… characteristics of various electrostatic-drive micromotors. In particular the design powers the variable-capacitance side-drive micromotor. This power supply provides variable frequency, variable voltage, and variable duty-cycle control. Simulation has been used extensively in the design and …
-
Design, Fabrication, and Characterization of a Rotary Variable-Capacitance Micromotor Supported on Microball Bearings
… fabrication, and characterization of a rotary micromotor supported on microball bearings are reported in this dissertation. This is the first demonstration of a rotary micromachine with a robust mechanical support provided by microball-bearing technology. One key challenge in the realization of …
-
Novel performance analysis techniques with application to the scaling properties of silicon micromotor structures
… actuated variable capacitance silicon micromotor. A "conventional" finite element technique is used to obtain estimates for the direct axis and quadrature axis synchronous capacitive susceptances. The energy based formulation employed eliminates the need to extract self and mutual phase …
-
Benzocyclobutene-based Electric Micromachines Supported on Microball Bearings: Design, Fabrication, and Characterization
… microball-bearing-supported linear electrostatic micromotor with benzocyclobutene (BCB) low-k polymer insulating layers. The primary application of this device is long-range, high-speed linear micropositioning. The future generations of this device include rotary electrostatic micromotors and …
-
Optimization Of A Non-Contact Single Phase Drive Ultrasonic Micromotor: Via Design And Analysis Of Engineered Stator Curvature And Surface Acoustic Streaming Actuators
… leading to CMOSelectronics compatible ultrasonic micromotors. The MUMPS/PZT motor operates with a drive voltage of 4 - 10 Vpp in the frequency range of 100 kHz - 5 MHz, creating rotation through frictional coupling and acoustic streaming in the rotor-stator gap. Using interferometer measurements, …
-
Closed-Loop Control of a Micropositioner Using Integrated Photodiode Sensors
… microball bearing supported linear electrostatic micromotor to improve accuracy and reliability. The fabrication sequence of the previously developed micromotor was modified to integrate a photodiode-based position sensing mechanism. Proportional control law is used in the control system and …
-
Tantalum silicide variable capacitance rotary micromotors : design and fabrication
… material by fabricating a rotary micromotor utilizing a proven design. This material was used for the rotor, stators, and bearing over a silicon substrate. It has the attraction of potentially reducing the friction which is a major problem with polysilicon-to-polysilicon bearings. …
-
Investigation and development of ferrofluid enabled micro-electro-mechanical systems
… the effectiveness of such microbearing, a linear micromotor is first characterized and demonstrated. Also, frictional force and load carrying capacity of such microbearing is investigated showing very low frictional forces with good load bearing capabilities. Given the promising results in the …
-
Desenvolvimento do processo de estampagem para miniaturização de motores
… este trabalho tem por objetivo desenvolver um micromotor de passo e avaliar os efeitos da miniaturização de seus componentes. A simulação computacional foi utilizada neste trabalho de forma a avaliar os defeitos surgidos com a miniaturização, através do software de elementos finitos DYNAFORM …
-
Rotary micro-electro-mechanical scanner for chip-level beam steering application
… of a metallic polygon mirror mounted on a DC micromotor, providing a range of high-speed operation depending upon the application. Current polygon scanners have a large footprint, consume a large amount of power and are heavy. Moreover, these features of polygon scanners become serious …
-
Medical Imaging of Magnetic Micromotors Through Scattering Tissues
… allow localization and tracking of single or few micromotors at high spatiotemporal resolution in deep tissue. This thesis addresses some of these limitations, by exploring the use of two optical-based techniques (IR and photoacoustic imaging (PAI)) and a combination of both US and PAI. First, we …
-
Electrokinetic phenomena of electrically induced Janus droplets and their applications
… are introduced in this thesis: microvalve and micromotor. The EIJD-based microvalve is controllable using electric field. By testing the performance of the microvalve systematically, the capability of such an EIJD-based microvalve in sealing, switching time and flow rate control is confirmed. …
-
Ultrafast laser deposition and microfabrication of thin films for MEMS structures
… pulsed laser deposition and fabrication of micromotor on Teflon thin films along with a comparison of the traditional excimer deposition. The second paper deals with the femtosecond pulsed laser deposition and fabrication of microgripper on 3C-SiC along with a comparison of films deposited …
Page 1 of 2