Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 521 for “"Microphones"”.

  1. High noise level microphones used in aircraft.

    … the present "State of the Art" high noise level microphones. They are the M-87/AIC and M-87/AIC+ (EV 693) both made by Electro-Voice and the HNL bone conduction microphone made by SETCOM Corporation. The advantages and disadvantages of using a bone conduction microphone over a boom mounted …

    nps Repository record for High noise level microphones used in aircraft. (opens in a new tab)

  2. Packaging and Characterization of MEMS Optical Microphones

    Miniature microphones have numerous applications but often exhibit poor performance which can be attributed to the challenges associated with capacitive detection at small size scales. Optical detection methods are able to overcome some of these challenges although miniaturized integration of these …

    gatech Repository record for Packaging and Characterization of MEMS Optical Microphones (opens in a new tab)

  3. Integration and characterization of micromachined optical microphones

    … parasitic fly Ormia Ochracea. The micromachined microphones feature optical interferometric displacement detection achieved using a commercially available Vertical Cavity Surface Emitting Laser (VCSEL) coupled with a custom designed silicon photodiode array. This design is shown to have …

    gatech Repository record for Integration and characterization of micromachined optical microphones (opens in a new tab)

  4. CMOS Readout Interfaces for MEMS Capacitive Microphones

    … for the readout interfaces of MEMS Capacitive Microphones (MCM) by presenting their detailed design descriptions and measurement results as application-specific ICs (ASIC) in CMOS technology developed to exploit their application scope in consumer electronics and hearing aids. MCMs are a new …

    trento Repository record for CMOS Readout Interfaces for MEMS Capacitive Microphones (opens in a new tab)

  5. Spatial soundfield recording using multiple higher order microphones

    … implementations, due to large numbers of microphones required and its extreme precision demand for equipment synchronisation and sensor positioning. This project presents an experimental design of a 2D soundfield recording system using multiple higher order microphones with its auxiliary …

    anu Repository record for Spatial soundfield recording using multiple higher order microphones (opens in a new tab)

  6. Modeling the performance of MEMS based directional microphones

    A Micro Electro Mechanical System (MEMS) based directional microphone consisting of two plates hinged at the center is modeled using finite element software. A new method is developed in which the sensor is acoustically coupled to an incoming sound wave. The method successfully reproduces results …

    nps Repository record for Modeling the performance of MEMS based directional microphones (opens in a new tab)

  7. Testing and characterization of second-order differential microphones

    … is the testing and characterizing of directional microphones, designed based on the ear of the fly Ormia ochracea. The response of these microphones is modeled as a linear combination of the gradients of the sound field. A least squares approach is employed in order to determine the transfer …

    binghamton Repository record for Testing and characterization of second-order differential microphones (opens in a new tab)

  8. Comparison calibration of piezoresistive microphones for acoustic power measurements

    A calibration of two Endevco piezoresistive microphones was carried out under static and dynamics pressures. The dynamic pressure calibrations were done by comparison with a B&K condenser microphone. The calibration was carried out in a small closed volume in air and helium. In helium, the codes …

    nps Repository record for Comparison calibration of piezoresistive microphones for acoustic power measurements (opens in a new tab)

  9. Micromachined biomimetic optical microphones with improved packaging and power consumption

    Low noise, directional microphones are critical for hearing aid applications. This thesis is focused on further development of a biomimetic micromachined directional microphone based on the ear structure of the Ormia Ochracea, a parasitic fly able to locate sound sources in the audio frequency …

    gatech Repository record for Micromachined biomimetic optical microphones with improved packaging and power consumption (opens in a new tab)

  10. Hermetically-Encapsulated Precision Accelerometer Contact Microphones for Wearable Medical Devices

    Cardiopulmonary diseases are considered the leading cause of mortality globally, and the interdependence of cardiac and pulmonary health makes continuous monitoring of vital health parameters essential for an accurate and timely diagnosis. Mechano-acoustic signals emanating from the heart and lungs …

    gatech Repository record for Hermetically-Encapsulated Precision Accelerometer Contact Microphones for Wearable Medical Devices (opens in a new tab)

  11. Bayesian 3D multiple people tracking using multiple indoor cameras and microphones

    … according to different configurations of microphones. As a visual-feature detection, Viola-Jones face detection is used to initialize the locations of unknown multiple objects. Then, a corner feature, based on the results from the Viola-Jones face detection, is used for motion detection …

    gatech Repository record for Bayesian 3D multiple people tracking using multiple indoor cameras and microphones (opens in a new tab)

  12. Measurement of Thermal Noise in Condenser Microphones in a Vacuum-Isolation Vessel

    The electrical noise generated by thermal agitation of the air molecules impinging upon the membrane of a condenser microphone and from its associated preamplifier has been studied analytically and experimentally over a wide bandwidth. These background noise levels constitute one of the most …

    odu Repository record for Measurement of Thermal Noise in Condenser Microphones in a Vacuum-Isolation Vessel (opens in a new tab)

  13. Relative Infrasound Calibration of Microphones with Application to Outdoor Vector Intensity Measurements

    … amplitude correction of 12.7 mm diameter, Type-1 microphones for three frequency bands, including within the infrasound regime, and its application to acoustic measurements. Previous data stem from acoustic intensity measurements using two-dimensional, four-microphone probes, which emphasized the …

    byu Repository record for Relative Infrasound Calibration of Microphones with Application to Outdoor Vector Intensity Measurements (opens in a new tab) Download PDF for Relative Infrasound Calibration of Microphones with Application to Outdoor Vector Intensity Measurements (opens in a new tab)

  14. Micromachined diffraction based optical microphones and intensity probes with electrostatic force feedback

    … in many applications such as directional microphones for hearing aids and sound intensity probes. This measurement is especially challenging with decreasing microphone size, which reduces the sensitivity due to small spacing between the pressure ports. Novel, micromachined biomimetic …

    gatech Repository record for Micromachined diffraction based optical microphones and intensity probes with electrostatic force feedback (opens in a new tab)

  15. High precision accelerometer contact microphones for detection of mechano-acoustic cardiopulmonary signals

    The objective of this research is to design, fabricate and characterize a MEMS-based Accelerometer Contact Microphone (ACM) that enables wearable measurement of cardiopulmonary mechano-acoustic signals, providing a platform for longitudinal monitoring of vital health parameters. This work presents …

    gatech Repository record for High precision accelerometer contact microphones for detection of mechano-acoustic cardiopulmonary signals (opens in a new tab)

  16. Using Skin-Mounted Microphones for Reconstructing in Vivo Interskeletal Forces: A Feasibility Study

    … external measurement technique utilizing microphones on the surface of human skin to enable characterization of forces transferred through bone structures during natural motion. While the measurement of forces within the skeleton during human movement is of great interest to researchers …

    alabama Repository record for Using Skin-Mounted Microphones for Reconstructing in Vivo Interskeletal Forces: A Feasibility Study (opens in a new tab)

  17. Development of biomimetic MEMS microphones inspired by Ormia Ochracea working in audio range

    … of novel Micro-electro-mechanical-system microphones inspired by the fly Ormia ochracea's ears are presented in this thesis. The first category is the microphone composed of two coaxial single crystal silicon plates rotating along the same beam fixed to a certain thickness substrate that …

    strathclyde Repository record for Development of biomimetic MEMS microphones inspired by Ormia Ochracea working in audio range (opens in a new tab)

  18. DATA FOR EXPLOSION MONITORING: ACOUSTIC EXPLOSION SIGNATURES COLLECTED ON INFRASOUND MICROPHONES AND SMARTPHONES

    … explosion datasets collected on infrasound microphones and smartphone sensors to help address the lack of available data and dense sensor networks for explosion monitoring. In Chapter 2, a chemical high explosive (HE) dataset collected on infrasound sensors is presented. For those who are …

    hawaii Repository record for DATA FOR EXPLOSION MONITORING: ACOUSTIC EXPLOSION SIGNATURES COLLECTED ON INFRASOUND MICROPHONES AND SMARTPHONES (opens in a new tab)

  19. Advanced Uses for Carbon Nanotubes: A Spherical Sound Source and Hot-films as Microphones

    … and include the ability to construct microphones of various sizes and shapes because the film is ultra-lightweight and flexible. The microphone’s sensitivity, power requirements, and frequency response were investigated. Results indicate that it may be feasible to use a CNT hot-film …

    mtu Repository record for Advanced Uses for Carbon Nanotubes: A Spherical Sound Source and Hot-films as Microphones (opens in a new tab)

Page 1 of 27