Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 35 for “"Microporous Layer"”.
-
Towards reliable correlation of microporous layer physical characteristics and PEMFC electrochemical performance
… it has been found that by including a cathode microporous layer (MPL) in the membrane electrode assembly (MEA) , performance under dry conditions (no external humidification) can be significantly improved . However, the precise function of the MPL is not well understood and therefore there is …
-
Experimental Measurement of Effective Diffusion Coefficient in Gas Diffusion Layer/Microporous Layer in PEM Fuel Cells
… diffusion coefficient of the gas diffusion layer (GDL)/microporous layer (MPL) is important to accurately predict the mass transport limitations for high current density operation of polymer electrolyte membrane (PEM) fuel cells. All the previous studies regarding mass transport limitations …
-
Novel double-sided microporous layer coated gas diffusion layers for the improved performance of polymer electrolyte membrane fuel cells
… to fuel cells because they comprise different layers made from various materials. The interfaces between these layers can make it difficult for electrons to pass through. The gas diffusion layer and microporous layer are particularly influential. The microporous layer, made of carbon black and …
-
Evaluation of the Effects of Microporous Layer Characteristics and Assembly Parameters on the Performance and Durability of a Planar PEM Fuel Cell
… and optimizing the functions of the microporous layer (MPL). Researchers have found that including this layer, composed of carbon black and TeflonTM (PTFE), between the gas diffusion layer (GDL) and catalyst layer (CL) of PEMFCs improves performance. The major benefit of the MPL in …
-
A study of water crossover in polymer electrolyte membrane fuel cells
… inlet humidity and the presence of a cathode microporous layer. In general water crossover was found to be increasingly toward the anode side with increasing current density up to a certain point beyond which a plateau was observed. Larger cathode-to-anode inlet humidity gradient, lower …
-
Interfacial Transport Phenomena of the Non-Wetting Phase in Porous Media: Applied to Polymer Electrolyte Fuel Cell Gas Diffusion Media
… applied to water transport in the gas diffusion layer of polymer electrolyte fuel cells (PEFCs). Evidence of a region of gradual property change between the microporous layer and macroporous layer of bi-layer diffusion media is presented, and a mathematical model describing the effects of this …
-
Micro and nano scale three-dimensional reconstruction of polymer electrolyte fuel cell porous layers
… through micro/nano characterisation of porous layers of the fuel cell. X-ray micro/nano tomography has been developed to reveal a three dimensional digital image of gas diffusion layers at micro/nano scale and focused ion beam/scanning electron microscope nanotomography technique was developed …
-
Novel Materials and Architectures for the Gas Diffusion Layer of Polymer Electrolyte Membrane Fuel Cells.
… of PEM fuel cell technology. The gas diffusion layer and the microporous layer are essential components for maintaining the balance of liquid water in the fuel cell, and the removal of excess liquid water from the cathode porous media continues to pose problems for the PEM fuel cell operating in …
-
Mathematical Modeling and Reconstruction of Porous Media to Understand Transport Phenomena for Electrochemical System Applications
… media that is in contact with the catalyst layer. Specifically, the gas diffusion layer for fuel cells and porous transport layer for electrolyzers. The focus of this work is to observe the influence of different pore structures on transport phenomena to determine the best physical …
-
Measurement of capillary pressure properties of gas diffusion materials used in proton exchange membrane fuel cells
… transport limitation in the porous gas diffusion layer (GDL) in modeling two-phase transport phenomena in a fuel cell. Various assumptions and approximations on capillary pressure curve have been made to develop models due to the scarcity of the experimental data of gas diffusion layers (GDL). The …
-
Corrosion of bipolar plates in PEM fuel cells
… side. Fe was mainly observed in the cathode side microporous layers, whereas Ni, Cr and Cu were mostly accumulated in the cathode side or in the membrane. Synchrotron XRF maps of MEA plan views showed a crack-like distribution for Fe and Pt which were similar to cracks in the microporous layer of …
-
Novel substrates for improved cooling of power electronics
… the impact of the thickness of the copper microporous layer as well as its size relative to the thermal test die on the heat transfer performance. The second methodology developed a novel substrate that replaces the DBC by having a cold plate with integrated AlN dielectric and circuit …
-
Significance of Heat Dissipation in the Cathode Catalyst Layer on the Lifetime and Reliability of Polymer Electrolyte Fuel Cells
… that cause local hotspots in the catalyst layer of the Polymer Electrolyte Fuel Cell, a two-phase non-isothermal model has been developed by coupling Darcy’s law with heat transport. The domain under consideration is a section of the membrane electrode assembly with a half-channel and a …
-
Investigations into intermediate temperature polymer electrolyte fuel cell gas diffusion layers: when science meets art
… on electronic conductivity, the influence of the microporous layer, the influence of hydrophobicity and the influence of GDL thickness. This has been done using a mixed methods approach consisting of simulation and experimental work. MEAs were simulated and hand-painted to test the GDL material …
-
Enhancing the Performance of Air Electrode Structures Utilized in Aqueous Alkaline Flow Systems
… through unique pathways, such as multifunctional microporous layer (MPL) investigations, manganese dioxide (MnO<sub>2</sub>) catalyst modifications, and explorations of implementing these materials into aqueous alkaline flow systems. In this thesis, we discuss novel ideas and experimentation …
-
Liquid Water Transport Behavior in Polymer Electrolyte Membrane Fuel Cell Gas Diffusion Layers due to Material Degradation and Fibre Surface Morphology
… electrolyte membrane fuel cell gas diffusion layers (GDLs) is essential for improving cell performance and durability. However, the uncontrolled decrease in GDL hydrophobicity has been found within a short portion of the expected operation lifetime. This decreased hydrophobicity can lead to an …
-
Effect of morphological features of fuel cell cathodes on liquid water transport
… electrochemical activity in the catalyst layer. Cracks and interfacial voids are typical of catalyst layers in operating cells, and are thought to affect water management and other transport properties such as gas diffusion and conductivity. This thesis investigates the effect of such …
-
X-ray Investigations of Liquid Water Transport in Polymer Electrolyte Membrane Fuel Cell Gas Diffusion Layers
… to achieving high performance. The gas diffusion layer (GDL) provides transport pathways for electrons, reactant gases, and product water. However, when liquid water accumulates within the pores of the GDL, the effective porosity of the material is decreased, resulting in a reduced effective …
-
Water transport in complex, non-wetting porous layers with applications to water management in low temperature fuel cells
… water percolation inside the porous transport layer, PTL, of proton exchange membrane, PEM, fuel cells and identify the relevant characterization parameters. In parallel with the observation of the water movement, the injection pressure (pressure required to transport water through the PTL) was …
-
Modified catalyst layer interfaces for higher utilization and improved operational flexibility of low loading polymer electrolyte fuel cell catalyst layers
… the interfaces of the cathode catalyst layer. Two interfaces were studied and modified, namely the membrane | cathode catalyst layer (CCL) and the CCL | microporous layer (MPL) interfaces. Firstly, the interface of the membrane and CCL was modified by addition of a thin, dense Pt layer …
Page 1 of 2