Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 11 of 11 for “"Microporous surface"”.

  1. Flow Boiling of a Dilute Emulsion on a Microporous Surface

    … and 2%. Experiments were conducted for a smooth surface and three microporous surfaces of varying thickness (708, 633, 412 μm) and porosity (0.354, 0.410, 0.413). For water on the smooth surfaces, the single-phase heat transfer coefficient increases with increasing mass flux and decreasing gap …

    umn Repository record for Flow Boiling of a Dilute Emulsion on a Microporous Surface (opens in a new tab)

  2. Investigation of Spray Cooling Schemes for Dynamic Thermal Management

    … The test samples include: (i) plain, smooth surface, and (ii) microporous surface featuring 100 μm thick copper-based coating prepared by dual stage electroplating technique. Experimental conditions involve HFE-7100 at atmospheric pressure and 30°C and ~10°C subcooling. Steady flow spray …

    unt Repository record for Investigation of Spray Cooling Schemes for Dynamic Thermal Management (opens in a new tab)

  3. Mechanical texturing of microporous surfaces to enhance pool boiling heat transfer

    … decades. One of the highest CHFs is seen with microporous surfaces among various surface features, however, there is a tradeoff between CHF and HTC with respect to the microporous coating thickness. The thick coatings show an increase in CHF and a decrease in HTC while the thin coatings show …

    gatech Repository record for Mechanical texturing of microporous surfaces to enhance pool boiling heat transfer (opens in a new tab)

  4. Liquid Metal Dealloying of an Additively Manufactured Niobium-Titanium Alloy

    … (LMD) has emerged as a method of producing microporous metals, expanding the previously limited alloy systems that can be made by traditional dealloying techniques. The rise in additive manufacturing (AM) has enabled the creation of unique geometries previously unrealized via conventional …

    jhu Repository record for Liquid Metal Dealloying of an Additively Manufactured Niobium-Titanium Alloy (opens in a new tab) Embargoed until 2026-12-01

  5. Matrix-Derived Microcarriers for Adipose Tissue Engineering

    … stable beads, as well as the production of a microporous surface topography. The mean bead diameter was 934 ± 51 μm, while the porosity was measured to be 29 ± 4 % using liquid displacement. Stability and swelling behavior over 4 weeks indicated that the DAT-based microcarriers were …

    queens Repository record for Matrix-Derived Microcarriers for Adipose Tissue Engineering (opens in a new tab)

  6. Enhancement of Pool Boiling Heat Transfer using a Combination of Open Microchannels and Microporous Surfaces

    … be further augmented with the use of enhanced surfaces. The present research is focused on developing microporous surface coatings on the plain and microchannel surfaces to further enhance pool boiling heat transfer. In this work, a two-step electrodeposition technique involving application of …

    rit Repository record for Enhancement of Pool Boiling Heat Transfer using a Combination of Open Microchannels and Microporous Surfaces (opens in a new tab)

  7. Effect of surface treatment on the mechanical properties of the polysulfone-Al/Li bonded system including thin film studies of moisture intrusion and the viscoelastic response of the interphase region

    … acid anodization (PAA). The study of the Al/Li surfaces involved the determination of the elemental composition and morphological features of the pretreated adherend before bonding and following failure. When thermoplastic polysulfone (PSF) was either thermally pressed or primed onto the …

    vt Repository record for Effect of surface treatment on the mechanical properties of the polysulfone-Al/Li bonded system including thin film studies of moisture intrusion and the viscoelastic response of the interphase region (opens in a new tab)

  8. High porosity polymers for advanced applications

    … confined catalytic materials. For this purpose, microporous polymeric networks have been prepared using bidentate electrophilic monomers such as bipyridine groups contained in 4,5-diazafluoren-9-one (DF) and aromatic diphosphines such as 1,2-bis(diphenylphosphino)ethane (DPPE), …

    valladolid Repository record for High porosity polymers for advanced applications (opens in a new tab)

  9. Engineered Biomass-Derived Carbon Adsorbents for Targeted Contaminant Remediation from Aqueous Environments

    … and acid exfoliation method to enhance the total surface area (TSA) and microporous surface area (MSA) of the BC. The alkali-acid intercalated-exfoliated (ICE) BC modification involves the usage of various alkali hydroxides to intercalate the alkali ion between the carbon layers of the BC and then …

    unlv Repository record for Engineered Biomass-Derived Carbon Adsorbents for Targeted Contaminant Remediation from Aqueous Environments (opens in a new tab) Download PDF for Engineered Biomass-Derived Carbon Adsorbents for Targeted Contaminant Remediation from Aqueous Environments (opens in a new tab)

  10. THE EFFECTS OF PHYSICAL FACTORS ON THE ADSORPTION OF SYNTHETIC ORGANIC COMPOUNDS BY ACTIVATED CARBONS AND ACTIVATED CARBON FIBERS

    … depend on the characteristics of the adsorbent (surface area, pore size distribution (PSD), and surface chemistry), the nature of the adsorbate (molecular weight and size, functional groups, polarity, solubility), and the condition of the background solution (pH, temperature, presence of …

    clemson Repository record for THE EFFECTS OF PHYSICAL FACTORS ON THE ADSORPTION OF SYNTHETIC ORGANIC COMPOUNDS BY ACTIVATED CARBONS AND ACTIVATED CARBON FIBERS (opens in a new tab)

  11. Ανάπτυξη νανοσύνθετων πολύ-λειτουργικών μεμβρανών και εφαρμογή τους σε περιβαλλοντικές διεργασίες

    … the interfacial adhesion between the ceramic surface and the GO deposit and the influence they had on the orientation and characteristics of the neighboring GO nanosheets that constituted the formed oligo-layers. Then, by percolating a GO/H2O suspension through the oligo-layer membranes, the …

    greece Repository record for Ανάπτυξη νανοσύνθετων πολύ-λειτουργικών μεμβρανών και εφαρμογή τους σε περιβαλλοντικές διεργασίες (opens in a new tab)