Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 17 of 17 for “"Microstereolithography"”.
-
Applications of Microstereolithography in Tissue Engineering
Microstereolithography is a microfabrication technique based on the light induced crosslinking of a prepolymer according to a computer based design. The technology emerged in the 1980’s as a rapid prototyping technique for the fabrication of small parts and devices. The technique has evolved into …
-
Mask Projection Microstereolithography 3D Printing of Gelatin Methacrylate
… technique used with GelMA. Mask projection microstereolithography (MPµSL or µSL) is an advanced 3D printing technique that can produce geometries with high resolution, high complexity, and feature sizes unlike extrusion based printing. There are few biomaterials available for µSL …
-
Design of an inverted microstereolithography systm using uv light
Master of Science (M.S.)
-
Development Of Microstereolithography And Photopolymerisable Polymers for Peripheral Nerve Repair
… NGC devices utilising a bespoke laser-sourced microstereolithography system and microwave synthesised, degradable photopolymerisable liquid pre-polymers. The suitability of the structuring system and materials in this function where assessed by the fabrication of well-defined structures and …
-
Design and Fabrication of a Mask Projection Microstereolithography System for the Characterization and Processing of Novel Photopolymer Resins
… work was to design and build a mask projection microstereolithography (MPμSL) 3D printing system to characterize, process, and quantify the performance of novel photopolymers. MPμSL is an Additive Manufacturing process that uses DLP technology to digitally pattern UV light and selectively cure …
-
Masked projection stereolithography : improvement of the Limaye model for curing single layer medium sized parts : a thesis presented in partial fulfillment of the requirements for the degree of Doctor of Philosophy in Engineering (School of Engineering and Advanced Technology) at Massey University, Albany, New Zealand
… processes, and what is now called microstereolithography. Integral curing has been made possible by the advent of dynamic masking generators such as liquid crystal displays (LCDs) and digital micromirror devices (DMDs). Much of the theory for this new layering process has been …
-
Imparting Functionality to Macromolecules for Selective Stimulus Response
… network formation into three dimensions using microstereolithography resulted in novel acid-degradable 3D-printed parts. An additional study investigated mixtures of acrylamide-modified poly(vinyl alcohol) and poly(ethylene glycol) diacrylate as water-soluble resins for the direct formation of …
-
2D Patterning and 3D Printing of Novel PGSm for Peripheral Nerve Repair and Soft Tissue Engineering
… photocured into 3D foams. PGSm was printed via microstereolithography into nerve guidance conduits and tested for use in peripheral nerve repair in vitro, ex vivo and in vivo. Porous PGSm conduits were developed and tested ex vivo, with an intended use for larger gap injuries. Porous PGSm was …
-
Infrared stereolithography
… goal of this thesis is to study the process of microstereolithography by infrared radiation and the corresponding polymeric systems. Thermal effects were used over an appropriated polymeric resin to induce a phase change in the material, known as cure reaction, and consequently to obtain solid …
-
Design, Analysis, and Application of Architected Ferroelectric Lattice Materials
… were additively manufactured using projection microstereolithography from a PZT-polymer composite and their piezoelectric coefficients experimentally verified and also found to be in agreement with the analytical and numerical predictions. The results show that the use of lattice …
-
Design and Analysis of a Mask projection Micro Stereolithography System
Mask Projection Microstereolithography (MPSLA) is an additive manufacturing process capable for fabricating true three-dimensional microparts and hence, holds promise as a potential micro-fabrication process for micro-machine components. With only a few MPSLA systems developed and studied so far, …
-
A Prototype of Simple Implantable Optofluidic Device Enabled by 3D Printing Technology
… potentially advanced and innovative designs. Microstereolithography (µSLA) has emerged as a versatile solution primarily due to its comparable resolution and compact manufacturing processes. This technology has been found widespread in applications across various fields, particularly in the …
-
Three-dimensional polymeric capillary network: fabrication and applications
… supports. This was realized on a projection microstereolithography (PμSL) which produced both the micro structure and the sacrificial part simultaneously using digital grayscale images. To establish the selectivity of the etchant to the partially crosslinked sacrificial parts, we measured the …
-
Towards high throughput fabrication of 3D microscale parts using microscale selective laser sintering
… AM approach is based on photopolymerization (microstereolithography), and therefore is limited to polymers. Metals play a crucial role in development of functional microdevices in several of the aforementioned devices, and currently there are several challenges associated with making small …
-
Design and Manufacturing of Hierarchical Multi-Functional Materials Via High Resolution additive Manufacturing
This master's thesis deals with the challenges of undesirable thermal expansion in lightweight materials. Thermal expansion of parts or components can lead to malfunction or breakdowns of complete systems in demanding environment where a large temperature gradient often exists. This work …
-
Fabrication and Characterization of Carbon Nanocomposite Photopolymers via Projection Stereolithography
Projection Stereolithography (PSL) is an Additive Manufacturing process that digitally patterns light to selectively expose and layer photopolymer into three dimensional objects. Nanomaterials within the photopolymer are therefore embedded inside fabricated objects. Adding varying concentrations of …
-
New materials and processes for rapid prototyping of microfluidic chips
… high-resolution features, often referred to as microstereolithography. The most widespread µSL-technology for microfluidics prototyping is the projection-based Digital Light Processing (DLP), which can reach resolutions down to the single-digit micron regime. While this resolution is well suited …