Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 41 for “"Microstructural study"”.

  1. Microstructural study of intergranular M23C6 precipitates in Alloy 709

    The microstructural properties of M23C6 (M: mainly Cr), the predominant precipitate phase of Alloy 709, were studied with respect to the correlation with the austenite matrix, γ-Fe. Alloy 709 specimens, aged at 550, 650, and 750℃ for 1 - 3000 hours, were investigated using electron microscopy and …

    uiuc Repository record for Microstructural study of intergranular M23C6 precipitates in Alloy 709 (opens in a new tab)

  2. Microstructural study of a conducting polymer doped with carbon nanotubes

    This work concerns the microsctructure of benzimidazobenzophenanthroline, BBL, films doped with carbon nanotubes, CNTs, to increase the electron mobility of the films. The CNT dopings were 1, 9 and 50 wt% respectively. The microsctructures were studied using electron microscopy including scanning …

    chalmers Repository record for Microstructural study of a conducting polymer doped with carbon nanotubes (opens in a new tab)

  3. A microstructural study of the extension-to-shear fracture transition in Carrara Marble

    … that are aligned parallel to slip. This study uses the fractured samples that were formed under triaxial extension experiments to characterize 1) microscopic surface features using scanning electron microscopy, 2) fracture surface morphology using laser profilometry, and 3) off-fracture …

    tamu Repository record for A microstructural study of the extension-to-shear fracture transition in Carrara Marble (opens in a new tab)

  4. Kinetic and Microstructural Study of Titanium Nitride Deposited by Laser Chemical Vapor Deposition

    The deposition apparent activation energy was calculated as 122 $\pm$ 9 kJ/mole using growth rates measured by film height and 117 $\pm$ 23 kJ/mole using growth rates measured by LIF signals. This puts the process in the surface kinetic growth regime over the temperature range 1370-1610 K. Above …

    uiuc Repository record for Kinetic and Microstructural Study of Titanium Nitride Deposited by Laser Chemical Vapor Deposition (opens in a new tab)

  5. A mechanical and microstructural study of corrosion resistant alloys produced using wire arc additive manufacturing

    … of these alloys was quantified through microstructural analysis and mechanical testing. Methods for the analysis of mechanical properties included hardness, impact, fatigue and tensile testing.Changes in process parameters employed for the production of precipitation-hardening stainless …

    strathclyde Repository record for A mechanical and microstructural study of corrosion resistant alloys produced using wire arc additive manufacturing (opens in a new tab)

  6. A microstructural study of HAZ cracking in conventionally and directionally cast polycrystalline and single crystal IN-738 LC

    IN-738 LC, a precipitation hardened nickel based superalloy, containing substantial amounts of Al + Ti contents, is very difficult to weld due to its high susceptibility to HAZ cracking, during welding via conventional fusion welding techniques and subsequent PWHT. The cracking is mainly …

    manitoba Repository record for A microstructural study of HAZ cracking in conventionally and directionally cast polycrystalline and single crystal IN-738 LC (opens in a new tab)

  7. THE ROLE OF MELT/OLIVINE RATIO IN DISSOLUTION AND REACTIVE CRYSTALLIZATION: AN EXPERIMENTAL AND MICROSTRUCTURAL STUDY (ELECTRON BACK-SCATTERED DIFFRACTION - EBSD) AT 0.5 GPA.

    … reactive crystallization: an experimental and microstructural study (Electron Back-Scattered Diffraction - EBSD) at 0.5 GPa. ABSTRACT Microstructural and geochemical studies have emphasized that melt-rock reactions play a paramount role in the origin of gabbroic rocks in the lower oceanic …

    milano Repository record for THE ROLE OF MELT/OLIVINE RATIO IN DISSOLUTION AND REACTIVE CRYSTALLIZATION: AN EXPERIMENTAL AND MICROSTRUCTURAL STUDY (ELECTRON BACK-SCATTERED DIFFRACTION - EBSD) AT 0.5 GPA. (opens in a new tab)

  8. Electron ptychographic imaging of polymer and macromolecular ordering

    … and relatively low cost. However, the lack of microstructural study on these materials limits the ability to tailor them for broader and deeper applications.</p> <p>As important methods for microstructural research, electron microscopic techniques have the potential to image polymers and …

    oxford Repository record for Electron ptychographic imaging of polymer and macromolecular ordering (opens in a new tab)

  9. Micro Joining of Aluminum Graphite Composites

    … formation of Al4C3 while minimizing pores and microstructural defects in the joint. Microstructural study and shear test are performed to analyze the joints. Shear strengths of brazed joints are determined to be 20-21MPa which is comparable to the composite shear strength (46.5MPa in x-y plane …

    tamu Repository record for Micro Joining of Aluminum Graphite Composites (opens in a new tab)

  10. INVESTIGATION OF FLOW AND MICROSTRUCTURE IN RHEOMETRIC AND PROCESSING FLOW CONDITIONS FOR LIQUID CRYSTALLINE PITCH

    … of this research was to investigate the flow and microstructural behavior of a synthetic mesophase pitch (AR-HP) in rheometric and processing flow conditions. In addition, simulation studies were performed to establish a frame work for modeling the flow behavior of this complex material in …

    clemson Repository record for INVESTIGATION OF FLOW AND MICROSTRUCTURE IN RHEOMETRIC AND PROCESSING FLOW CONDITIONS FOR LIQUID CRYSTALLINE PITCH (opens in a new tab)

  11. PROGRESSIVE MICROSCOPIC DAMAGE AND THE DEVELOPMENT OF MACROSCOPIC FRACTURE IN POROUS SANDSTONES

    … means of earthquake prediction. It is known that microstructural damage induced dilatancy precedes macroscopic failure of a rock. However, the quantitative relationship between microstructural damage and fault development is not clearly understood. To better understand the mechanics of brittle …

    maryland Repository record for PROGRESSIVE MICROSCOPIC DAMAGE AND THE DEVELOPMENT OF MACROSCOPIC FRACTURE IN POROUS SANDSTONES (opens in a new tab)

  12. Πειραματική και αναλυτική διερεύνηση της συμπεριφοράς διεπιφανειών υδραυλικών ενεμάτων υψηλής διεισδυτικότητας και λίθινων ή πλίνθινων υπόβαθρων

    … investigated. Based on an extended systematic study, which comprises a) microstructural study of the interfaces b) mechanical tests and c) correlation of the results of points a and b, it is proved that the bond mechanism is mechanical in nature for the materials considered. Furthermore, the …

    greece Repository record for Πειραματική και αναλυτική διερεύνηση της συμπεριφοράς διεπιφανειών υδραυλικών ενεμάτων υψηλής διεισδυτικότητας και λίθινων ή πλίνθινων υπόβαθρων (opens in a new tab)

  13. Textural and microstructural studies of zinc sulfide and associated phases in certain base metal deposits

    A textural and microstructural study of a variety of zinc sulfide-containing ores has been undertaken, and the possible depositional and deformational controls of textural and microstructural development considered. Samples for the study were taken from both deformed and undeformed zinc ores of the …

    aston Download PDF for Textural and microstructural studies of zinc sulfide and associated phases in certain base metal deposits (opens in a new tab)

  14. Effects of Coagulant and Chickpea Cultivars on Chickpea Protein Curd

    This study investigated the influence of chickpea cultivar, coagulant type, and coagulant concentration on the physicochemical, texture, microstructural, and sensory properties of chickpea tofu. Seven chickpea cultivars (one desi CDC Consul and six Kabuli CDC Leader, CDC Lancer, B90, CDC Pearl, CDC …

    sask Repository record for Effects of Coagulant and Chickpea Cultivars on Chickpea Protein Curd (opens in a new tab)

  15. Transformation Induced Fatigue of Ni-Rich NiTi Shape Memory Alloy Actuators

    … includes the actuator fatigue life. In this study, as-received and polished at dogbone SMA specimens underwent transformation induced fatigue testing at constant loading. The constant applied loading ranged from 100 MPa to 200 MPa. Specimens were thermally cycled through complete actuation …

    tamu Repository record for Transformation Induced Fatigue of Ni-Rich NiTi Shape Memory Alloy Actuators (opens in a new tab)

  16. From control to constraint: a study of reproduction in the eusocial honeybee and the solitary red mason bee

    … enable assaying oogenesis, I performed the first microstructural study of the O. bicornis ovary (Chapter 5). Since mating plays an important role in the ovary activation of eusocial queens and other insect species, I concurrently examined the effect of mating status on the ovary of O. bicornis …

    whiterose Download PDF for From control to constraint: a study of reproduction in the eusocial honeybee and the solitary red mason bee (opens in a new tab)

  17. MICROSTRUCTURAL CONSTRAINTS ON THE NEBULAR AND ASTEROIDAL HISTORIES OF CALCIUM-ALUMINUM-RICH INCLUSIONS FROM CV3 CHONDRITES

    … body. This work represents the first systematic microstructural study of CAIs from CV3 chondrites. Chapter 2 presents the microstructural observations of primary mineralogies of fine-grained, spinel-rich inclusions (FGIs) from the Leoville and Efremovka meteorites. We observe microscale …

    unm Repository record for MICROSTRUCTURAL CONSTRAINTS ON THE NEBULAR AND ASTEROIDAL HISTORIES OF CALCIUM-ALUMINUM-RICH INCLUSIONS FROM CV3 CHONDRITES (opens in a new tab)

  18. A study on laser weldability improvement of newly developed Haynes 282 superalloy

    … research is therefore initiated with the goal of studying and developing an effective approach for preventing or minimizing cracking during LBW of the new superalloy Haynes 282. Careful and detailed electron microscopy and spectroscopy study reveal, for the first time, the formation of sub-micron …

    manitoba Repository record for A study on laser weldability improvement of newly developed Haynes 282 superalloy (opens in a new tab)

Page 1 of 3