Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 119 for “"Microsystems engineering"”.
-
Informing Precision Medicine Through Data-driven Modeling of Patient-specific Therapeutic Responses in Microfluidic-based Assays
… requires collaboration between the fields of microsystems engineering, computational biology, and clinical medicine. On the computational side, novel data analysis pipelines and interpretable statistical modeling methods are needed to extract the maximal amount of information from …
-
Pushing the limits of Hyper-NA optical lithography
The evolution of optical lithography to pattern smaller geometries was witnessed the shrinkage of source wavelength as a way to increase optical resolution. Shrinking of source wavelength into vacuum ultra-violet (VUV) faces a number of technical barriers with respect to imaging materials. Instead …
-
Study of direct fluorination in mini- and microreactors
… with the group of Prof. Woias (Department of Microsystems Engineering, University of Freiburg). In addition, the direct fluorinations of cyclic carbonates with F2 diluted with N2 in these reactors have been investigated. For the minireactor, we studied the fluorination of fluoroethylene …
-
Investigation of interaction of THz-radiation with metallic subwavelength sized structures in far- and near-field
… within a collaboration of the Department of Microsystems Engineering (IMTEK) in Freiburg. <br>The analysis of the observed spectral behaviour is based on the consideration of the excited surface current densitites obtained by FEM-simulations. <br> <br>In chapter seven the electromagnetic …
-
High-density CMOS probes for large-scale extracellular neural recording
… Clean Room Service Center of the Department of Microsystems Engineering. The post-CMOS process involves a series of steps to deposit passivation and metallization layers and to pattern the deposited and the subjacent CMOS layers. <br><br>The first system presented in this thesis implements a new …
-
Performance Evaluation of III-V Hetero/Homojunction Esaki Tunnel Diodes on Si and Lattice Matched Substrates
Understanding of quantum tunneling phenomenon in semiconductor systems is increasingly important as CMOS replacement technologies are investigated. This work studies a variety of heterojunction materials and types to increase tunnel currents to CMOS competitive levels and to understand how …
-
Development of Blue and Near-UV III-Nitride Laser Diodes
III-Nitrides show tremendous promise for a wide range of laser diodes and other optoelectronics devices. The wide range of emission wavelengths possible makes these devices ideal candidates for a wide range of applications. Despite this, several challenges remain unsolved, limiting the efficiency …
-
Online Novelty Detection System: One-Class Classification of Systemic Operation
Presented is an Online Novelty Detection System (ONDS) that uses Gaussian Mixture Models (GMMs) and one-class classification techniques to identify novel information from multivariate times-series data. Multiple data preprocessing methods are explored and features vectors formed from frequency …
-
Charge Photogeneration Experiments and Theory in Aggregated Squaraine Donor Materials for Improved Organic Solar Cell Efficiencies
Fossil fuel consumption has a deleterious effect on humans, the economy, and the environment. Renewable energy technologies must be identified and commercialized as quickly as possible so that the transition to renewables can happen at a minimum of financial and societal cost. Organic photovoltaic …
-
Nonlinear Optics in Photonic Ultrawide-Bandgap Circuits
Ultrawide-bandgap semiconductors have an important role for many applications ranging from power electronics to photonics. The semiconductor material with the largest bandgap is aluminum nitride with a maximum bandgap of 6.28 eV, corresponding to a wavelength transparency extending to 197 nm. The …
-
Optical and Mechanical Characterization of InAs/GaAs Quantum Dot Solar Cells
… and realized. Two novel mechanisms, bandgap engineering and absorption from an intermediate state within a semiconductor bandgap show promise in this regard. A single promising approach to both of these novel mechanisms is to exploit the unique properties of nanostructured materials to extend …
-
Image-based EUVL Aberration Metrology
A significant factor in the degradation of nanolithographic image fidelity is optical wavefront aberration. As resolution of nanolithography systems increases, effects of wavefront aberrations on aerial image become more influential. The tolerance of such aberrations is governed by the requirements …
-
Block Copolymers and Chirality: Interplay between Conformations and Structures
Block copolymers can exhibit chirality at three different length scales – molecular chirality at the residue scale, conformational chirality at the molecular scale, and structural chirality at the mesoscale from the self-assembly of thousands of molecules. Unique morphologies have been formed due …
-
A Novel Analytic Linear Interface Calculation and Its Use in Computational Fluid Dynamics for Enhanced Multiphase Modeling
Interfacial modeling is of widespread interest in manufacturing, imaging, and scientific applications. Presented here is an interfacial reconstruction method designed for use in Computational Fluid Dynamics (CFD) simulations of nucleate boiling, yet it is more broadly applicable. Nucleate boiling …
-
Efficient Photonic Integrated Circuits – Optimizing Fiber-to-chip Coupling, Modulation, and Detection
Photonic integrated circuits (PICs) are attracting attention in a wide range of applications due to their superior performance over traditional discrete photonic devices. However, the development of PICs is bottlenecked by the integration of different fundamental building blocks. High sensitivity …
-
Translating macroscale concepts to microfluidic devices
Electrokinetics represents an extremely versatile family of techniques that can be used to manipulate particles and fluid in microfluidic devices. This dissertation focused on taking techniques commonly used on a macroscale and developing microscale equivalents utilizing electrokinetics to …
-
Cell Dynamics in Three-dimensional (3D) Culture Environments
… relevant model systems for tissue engineering and artificial functional organs.
-
Flow Boiling Heat Transfer Over Open Microchannels With Tapered Manifold
Boiling can provide several orders of magnitude higher performance than a traditional air cooled system in electronics cooling application. It can dissipate large quantities of heat while maintaining a low surface temperature to fluid difference. Flow boiling with microchannels has shown a great …
-
Development of Material Characterization Techniques using Novel Nanoindentation Approaches on Hard and Soft Materials used in MEMS
Investigating and modeling the mechanical properties of materials is important for many applications. The most common technique used for mechanical characterization of materials is called nanoindentation. The currently available tools utilized in order to perform nanoindentation have their …
-
Enhancement of Ultrasonic Welding of Bulk Carbon Nanotube-Metallic and Graphene-Metallic Conductors
Nanostructured carbon sheets comprising carbon nanotube (CNT) or graphene are appealing for electrode and antenna applications. Physical connection to metal conductors requires enhanced mechanical strength, electrical performance, and thermal capability. Ultrasonic welding is a viable technique to …
Page 1 of 6