Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 75 for “"Mid-Wave"”.
-
Indium phosphide based photodiodes for mid-wave infrared detection
Mid-wave infrared (MWIR) photodetectors are used in many military and civil applications. Focal plane arrays made of these detectors are used for thermal imaging. In addition to high sensitivity, these devices require high degree of uniformity and operating temperatures close to room temperature. …
-
Mid-wave infrared guided mode resonators: novel structures and photodetection
… with the development and demonstration of mid-infrared (MIR, 3-14µm) photodetectors leveraging guided mode resonance (GMR) for photonic enhancement, capable of operating at room temperature in an imaging-array compatible configuration with small pixel sizes. While infrared photodetection …
-
Tellurite Fiber for High Power Mid-Wave Infrared Supercontinuum Generation
Broadband, high-power, mid-infrared sources are critical for many applica-tions. Fiber based supercontinuum generation is the optimum mid-infrared broad-band source that can provide extended bandwidth and good coherence. Compared to alternatives such as fluorides and chalcogenides, tellurite fibers …
-
Spectral Dependence of Deep Subwavelength Metallic Apertures in the Mid-wave Infrared
… (EOT) has amplified exploration into subwavelength systems. Researchers have previously suggested exploiting the spectrally selective electromagnetic field confinement of subwavelength cavities for multispectral detectors. Utilizing the finite-difference frequency domain (FDFD) method, we …
-
Development of PPLN Based Mid-Wave Infrared Transmitter and Receiver for SatCom
… of optical SatCom, most utilizing short-wave infrared (SWIR, 0.8-1.7 μm) wavelengths due to their favorable atmospheric transmission and the maturity of terrestrial telecom-derived technologies. However, SWIR systems suffer from severe performance degradation under adverse weather …
-
Retinomorphic mid-wave infrared in-sensor processing engine: device-to-architecture co-design
<p>Conventional frame-based CMOS image sensors acquire full-frame pixel data at discrete time intervals, resulting in substantial spatial redundancy and loss of temporal information between frames. The repeated conversion and transfer of redundant pixel data increases bandwidth and power …
-
Si-based Germanium Tin Photodetectors for Short-Wave and Mid-Wave Infrared Detections
… approach for imaging system in the short-wave infrared detection range and beyond due to bandgap limit. On the other hand, this market is heavily relied upon mature technology from III-V and II-VI elements over years, which are costly to growth and incompatible with available Si …
-
Colloidal quantum dots: a path toward making mid-wave infrared sensing a ubiquitous technology
… sensing more widely accessible. In the critical mid-wavelength infrared (MWIR) spectral range of 3-5 gm, commercially available detectors are limited by the high costs associated with epitaxial growth and hybridization, as well as the need for cryogenic cooling. These factors restrict their use …
-
An Ultrafast, Mid-Wave Infrared Source for Driving High-Order Harmonics Beyond the Water Window
… cooled Fe:ZnSe-based chirped pulse amplifier, a mid-wave infrared source for strong-field physics experimentation. The long upper-state lifetime provided by cryogenically cooling the Fe:ZnSe gain medium allows free-running, diode-pumped Er:YAG lasers to be used as pump lasers. The amplifier is …
-
An uncooled mid-wave infrared detector based on optical response of laser-doped silicon carbide.
This dissertation focuses on an uncooled Mid-Wave Infra-Red (MWIR) detector was developed by doping an n-type 4H-SiC with Ga using the laser doping technique. 4H-SiC is one of the polytypes of crystalline silicon carbide, a wide bandgap semiconductor. The dopant creates an energy level of 0.30 eV, …
-
Mid-Wave and Long-Wave Single Uni-polar Barrier Infrared Detectors Based on Antimonide Material Systems
… with varying degrees of sensitivity, speed, and wavelength sensitivity. One of the best performing technologies is based on Mercury Cadmium Telluride. However, it still has limitations with regard to low operating temperature, material yield and processing difficulties. A newer material …
-
Generation of mid-wave infrared signature using microradiating devices for vehicle mounted identification friend or foe applications
… operations. Thermal imagers require a 3-5 um mid-wave infrared (MWIR) signature. The integration of a MWIR signature into VMIFF will add a daytime capability. A new generation of compact MWIR sources is emerging to meet demands from a range of spectroscopy and communications applications. An …
-
Early Forest Fire Heat Plume Detection Using Neural Network Classification of Spectral Differences Between Long-Wave and Mid-Wave Infrared Regions
… stages of a forest fire around the clock. Long-wave IR (LWIR) is commonly referred to as the “thermal infrared” region where thermal emissions are captured without the need of, or reflections from, external radiation sources. Mid‑wave IR (MWIR) bands lie between the “thermal infrared” and …
-
Development of infrared technologies: all-optical modulation and rangefinding
The longer wave infrared bands, including mid-wave infrared, spanning 3 \(\mu\)m to 8 \(\mu\)m, and the long-wave infrared, spanning 8 \(\mu\)m to 14 \(\mu\)m, remain a relatively unexplored field beyond thermal imaging. While their visible counterparts have found their way into a plethora of …
-
Thermal history correlation with mechanical properties for polymer selective laser sintering (SLS)
… of two different cameras, a stationary reference mid-wave infrared (IR) and a bore-sighted mid-wave IR camera, by evaluating correlations between strength, elongation, and fracture location to the observed thermal history of the selective laser sintered parts produced. ZYX tensile bars were built …
-
Fast Compressed Automatic Target Recognition for a Compressive Infrared Imager
… targets at night. Several of these are either mid-wave or long-wave high resolution infrared sensors, which are expensive to manufacture. But compressive sensing, which has primarily been demonstrated in medical applications, can be used to minimize the number of measurements needed to …
-
Low Absorption Liquid Crystal Materials for Midwave Infrared
… spanning from visible, infrared, millimeter wave, to terahertz. In addition to direct-view displays and projection displays, liquid crystal is also widely used in adaptive optics, tunable-focus lens, and laser beam steering. Although the visible region has well developed materials and …
-
High-gain, low-noise avalanche photodiodes grown by molecular beam epitaxy
… (APDs) are important components in short-wave and mid-wave infrared detection systems (imaging, laser radar, communications, etc.) because their internal gain can improve receiver sensitivity and enables the detection of weak photon fluxes. In the mid-infrared, HgCdTe APDs represent the …
-
Vanadium Oxide Microbolometers with Patterned Gold Black or Plasmonic Resonant Absorbers
… the dry-etch removal of the sacrificial polyimide used to fabricate the air-bridge bolometers. Infrared responsivity is improved 70% for mid-wave IR and 22% for long-wave IR. The increase in the thermal time constant caused by the additional mass of gold black is a modest 15%. However, this …
-
Design And Demonstration Of Meanderline Retarders At Infrared Frequencies
… used as engineered birefringent materials for waveplates and retarders at radiofrequencies, and have been previously demonstrated at frequencies up to 90 GHz in the millimeter-wave band. In this dissertation, we present results related to the modeling, fabrication, and experimental …
Page 1 of 4