Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 72 for “"Mid-Wave infrared"”.
-
Indium phosphide based photodiodes for mid-wave infrared detection
Mid-wave infrared (MWIR) photodetectors are used in many military and civil applications. Focal plane arrays made of these detectors are used for thermal imaging. In addition to high sensitivity, these devices require high degree of uniformity and operating temperatures close to room temperature. …
-
Mid-wave infrared guided mode resonators: novel structures and photodetection
… with the development and demonstration of mid-infrared (MIR, 3-14µm) photodetectors leveraging guided mode resonance (GMR) for photonic enhancement, capable of operating at room temperature in an imaging-array compatible configuration with small pixel sizes. While infrared photodetection …
-
Tellurite Fiber for High Power Mid-Wave Infrared Supercontinuum Generation
Broadband, high-power, mid-infrared sources are critical for many applica-tions. Fiber based supercontinuum generation is the optimum mid-infrared broad-band source that can provide extended bandwidth and good coherence. Compared to alternatives such as fluorides and chalcogenides, tellurite fibers …
-
Spectral Dependence of Deep Subwavelength Metallic Apertures in the Mid-wave Infrared
… (EOT) has amplified exploration into subwavelength systems. Researchers have previously suggested exploiting the spectrally selective electromagnetic field confinement of subwavelength cavities for multispectral detectors. Utilizing the finite-difference frequency domain (FDFD) method, we …
-
Development of PPLN Based Mid-Wave Infrared Transmitter and Receiver for SatCom
… of optical SatCom, most utilizing short-wave infrared (SWIR, 0.8-1.7 μm) wavelengths due to their favorable atmospheric transmission and the maturity of terrestrial telecom-derived technologies. However, SWIR systems suffer from severe performance degradation under adverse weather …
-
Retinomorphic mid-wave infrared in-sensor processing engine: device-to-architecture co-design
<p>Conventional frame-based CMOS image sensors acquire full-frame pixel data at discrete time intervals, resulting in substantial spatial redundancy and loss of temporal information between frames. The repeated conversion and transfer of redundant pixel data increases bandwidth and power …
-
Si-based Germanium Tin Photodetectors for Short-Wave and Mid-Wave Infrared Detections
… and inexpensive imaging system working in the infrared range keeps increasing for the last decade, especially for civil applications. Although several group IV materials such as silicon and germanium are used to realize detectors in the visible and near infrared region, they are not the …
-
Colloidal quantum dots: a path toward making mid-wave infrared sensing a ubiquitous technology
… weight, power consumption, and cost (SWaP-C) of infrared detectors could make infrared sensing more widely accessible. In the critical mid-wavelength infrared (MWIR) spectral range of 3-5 gm, commercially available detectors are limited by the high costs associated with epitaxial growth and …
-
An Ultrafast, Mid-Wave Infrared Source for Driving High-Order Harmonics Beyond the Water Window
… cooled Fe:ZnSe-based chirped pulse amplifier, a mid-wave infrared source for strong-field physics experimentation. The long upper-state lifetime provided by cryogenically cooling the Fe:ZnSe gain medium allows free-running, diode-pumped Er:YAG lasers to be used as pump lasers. The amplifier is …
-
An uncooled mid-wave infrared detector based on optical response of laser-doped silicon carbide.
This dissertation focuses on an uncooled Mid-Wave Infra-Red (MWIR) detector was developed by doping an n-type 4H-SiC with Ga using the laser doping technique. 4H-SiC is one of the polytypes of crystalline silicon carbide, a wide bandgap semiconductor. The dopant creates an energy level of 0.30 eV, …
-
Generation of mid-wave infrared signature using microradiating devices for vehicle mounted identification friend or foe applications
… prototypes provide an omni-directional near infrared signature visible through night vision devices but not thermal imagers, and therefore are only effective during night operations. Thermal imagers require a 3-5 um mid-wave infrared (MWIR) signature. The integration of a MWIR signature into …
-
CHARACTERIZATION ANALYSIS AND DESIGN OF MID-WAVE INFRARED III- V-BASED TYPE-II SUPERLATTICE nBn PHOTODETECTORS FOR SPACE APPLICATIONS
The performance of the mid-wave infrared InGaAs/InAsSb nBn photodetector is investigated and its viability for space applications is assessed. Three structures are grown with unique absorber layer doping profiles via molecular beam epitaxy. Material and device characterizations are performed and …
-
Early Forest Fire Heat Plume Detection Using Neural Network Classification of Spectral Differences Between Long-Wave and Mid-Wave Infrared Regions
… current visible-spectrum sensor technology. Infrared (IR) light sensors, on the other hand, can detect heat plumes expelled at the initial stages of a forest fire around the clock. Long-wave IR (LWIR) is commonly referred to as the “thermal infrared” region where thermal emissions are …
-
Development of infrared technologies: all-optical modulation and rangefinding
The longer wave infrared bands, including mid-wave infrared, spanning 3 \(\mu\)m to 8 \(\mu\)m, and the long-wave infrared, spanning 8 \(\mu\)m to 14 \(\mu\)m, remain a relatively unexplored field beyond thermal imaging. While their visible counterparts have found their way into a plethora of …
-
“Bridging the Gap to Midwave Infrared Event-Based Sensors: Design, Sensitivity, and Radiation-Hardness Characterization of a Single-Pixel III-V Event-Based Infrared Sensor for Space Applications
… commercial event-based sensors made to cover the mid-wave infrared spectral range. Since many space-based sensing applications are primarily concerned with this waveband to see through the 3-5 μm atmospheric transmission window, there is great motivation to investigate how mid-wave infrared III-V …
-
Evaluation of the Dynamic Vision Sensor’s Photoreceptor Circuit for Infrared Event-Based Sensing
… detectors for applications involving visible wavelengths. However, much more research is needed before the event-based read-out can be effectively used with smaller bandgap photodetectors to increase the utility of event-based sensing into the mid- and long-wavelength infrared. The …
-
Low Absorption Liquid Crystal Materials for Midwave Infrared
… matters with applications spanning from visible, infrared, millimeter wave, to terahertz. In addition to direct-view displays and projection displays, liquid crystal is also widely used in adaptive optics, tunable-focus lens, and laser beam steering. Although the visible region has well developed …
-
High-gain, low-noise avalanche photodiodes grown by molecular beam epitaxy
… (APDs) are important components in short-wave and mid-wave infrared detection systems (imaging, laser radar, communications, etc.) because their internal gain can improve receiver sensitivity and enables the detection of weak photon fluxes. In the mid-infrared, HgCdTe APDs represent the …
-
Design And Demonstration Of Meanderline Retarders At Infrared Frequencies
… used as engineered birefringent materials for waveplates and retarders at radiofrequencies, and have been previously demonstrated at frequencies up to 90 GHz in the millimeter-wave band. In this dissertation, we present results related to the modeling, fabrication, and experimental …
-
Design and Fabrication of Quantum Cascade Laser Tree Arrays
… that can be designed to emit over a very broad wavelength range from the mid-wave infrared (MWIR) to terahertz frequencies. Their compact size and ability to output several watts of MWIR or long-wave infrared (LWIR) radiation makes them ideal sources for directional infrared counter measures …
Page 1 of 4