Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 18 of 18 for “"Minichannels"”.

  1. Condensation heat transfer and pressure drop of propane in vertical minichannels

    … during condensation of propane flowing through minichannels is investigated in this study. Studies of condensation of hydrocarbons are important for applications in the petrochemical industry. Insights into the mechanisms of propane condensation are required for accurate design of heat transfer …

    gatech Repository record for Condensation heat transfer and pressure drop of propane in vertical minichannels (opens in a new tab)

  2. An Experimental Investigation into the Effect of Surfactants on Air-Water Two-Phase Flow in Minichannels

    … is an important parameter for two-phase flow in minichannels. The published models are evaluated for correct consideration of the surface tension effects and accurate prediction of pressure drop. The addition of surfactant is shown to have no discemable influence on pressure drop. Two models by …

    rit Repository record for An Experimental Investigation into the Effect of Surfactants on Air-Water Two-Phase Flow in Minichannels (opens in a new tab)

  3. Experimental investigation of surface roughness microstructures and their effects on pressure drop characteristics in rectangular minichannels

    … surface roughness elements on pressure drop in minichannels in an effort to determine if conventional friction factor equations are valid in predicting the friction factor in minichannels. In the present work, an experimental study is carried out to investigate the effects of surface roughness …

    rit Repository record for Experimental investigation of surface roughness microstructures and their effects on pressure drop characteristics in rectangular minichannels (opens in a new tab)

  4. Experimental study of flow patterns, heat transfer, pressure drop and gravitational orientation during flow boiling in minichannels

    Microchannels and Minichannels are being used in electronic cooling, fuel cells, automotive heat exchangers, micro refrigeration systems. They are also being considered for high heat flux applications under microgravity environment in space missions. Research laboratories and industries throughout …

    rit Repository record for Experimental study of flow patterns, heat transfer, pressure drop and gravitational orientation during flow boiling in minichannels (opens in a new tab)

  5. Numerical Investigation of Thermal Performance of Minichannels with Transversely Patterned Non-slip/Slip Surfaces (Superhydrophobic Surfaces) in Turbulent Regime

    … drop and thermal performance of circular minichannels. Two non-slip to slip ratios and three different non-slip band widths were used in the simulation process. Parameters representative of the flow and heat transfer behavior such as boundary layer thickness, friction factor, slip length, …

    tamu Repository record for Numerical Investigation of Thermal Performance of Minichannels with Transversely Patterned Non-slip/Slip Surfaces (Superhydrophobic Surfaces) in Turbulent Regime (opens in a new tab)

  6. A Characterization of Flat-Plate Heat Exchangers for Thermal Load Management of Thermoelectric Generators

    … single-phase forced convection through 140 minichannels (1 mm × 1 mm × 90 mm long) as a heat transfer technique. The second prototype utilized 14 liquid jets, 3 mm in diameter and 40.3 mm apart, impinging on a flat surface located 5 mm above. Each impinging jets was positioned at the centre …

    mcmaster Repository record for A Characterization of Flat-Plate Heat Exchangers for Thermal Load Management of Thermoelectric Generators (opens in a new tab)

  7. Serpentine minichannel liquid-cooled heat sinks for electronics cooling applications

    … (DPSMs) and triple path serpentine rectangular minichannels (TPSMs), and their performance is compared, both experimentally and numerically, with that of a design based on an array of straight rectangular minichannels (SRMs) in terms of pressure drop (ΔP), average Nusselt number (Nuavg) and …

    whiterose Download PDF for Serpentine minichannel liquid-cooled heat sinks for electronics cooling applications (opens in a new tab)

  8. Análise de um modelo de recuperação de calor com trocador de calor de placas fixas

    … by a plate heat exchanger with circulating minichannels of the air flows. Its geometric data and operational parameters were compiled in a computer program developed in the MATLAB platform for simulation of the system considering both design conditions and effects of climatic variations …

    brazil-uerj Repository record for Análise de um modelo de recuperação de calor com trocador de calor de placas fixas (opens in a new tab)

  9. Evaluación experimental y numérica del reemplazo de un intercambiador de tubo aleteado monopuerto por tubo multipuerto en una bomba de calor reversible aire/agua

    … able to cut down the amount of substance used. Minichannels heat exchangers, with a very limited internal volume due to their small diameter, reduce the amount of refrigerant needed significantly. Therefore, they must be developed, and their use generalized. After reviewing the related …

    upc-spain Repository record for Evaluación experimental y numérica del reemplazo de un intercambiador de tubo aleteado monopuerto por tubo multipuerto en una bomba de calor reversible aire/agua (opens in a new tab)

  10. Design and performance characterization of high power density air-cooled compact condenser heat exchangers

    … condensation flow of refrigerant in rectangular minichannels to achieve high heat transfer performance in a compact design. These advancements are enabled by recent developments in micro-electric discharge machining to produce very high surface area compact heat exchanger devices. Air-cooled heat …

    uiuc Repository record for Design and performance characterization of high power density air-cooled compact condenser heat exchangers (opens in a new tab)

  11. Flow and Heat Transfer in Microchannels 30 to 300 Microns in Hydraulic Diameter

    … tension dominated flow in microchannels than in minichannels. R134a liquid superheats before the onset of nucleate boiling and the local evaporation heat transfer coefficient were measured in 75 x 811.94 mum microchannels. No indication of deviation from the classic nucleation theory was …

    uiuc Repository record for Flow and Heat Transfer in Microchannels 30 to 300 Microns in Hydraulic Diameter (opens in a new tab)

  12. Liquid-Cooled Heat Sinks Fabricated Using Wire-Arc Additive Manufacturing Techniques

    … a copper tube embedded in an aluminum plate or minichannels with solid parallel fins. Despite their widespread use, these configurations are not optimal for heat transfer. This thesis explores innovative and cost-effective manufacturing techniques using wire-arc thermal spray to create …

    toronto-retro Repository record for Liquid-Cooled Heat Sinks Fabricated Using Wire-Arc Additive Manufacturing Techniques (opens in a new tab)

  13. The Thermal Characteristics Of Multilayer Minichannel Heat Sinks In Single-Phase And Two-Phase Flow

    … for macro channels are not suitable for the minichannels, frequently overestimating the boiling heat transfer coefficient. Boiling correlations for small channels are more consistent with experimental data and the predictions of Yu's correlation match the experimental results best.

    arizona-thes Repository record for The Thermal Characteristics Of Multilayer Minichannel Heat Sinks In Single-Phase And Two-Phase Flow (opens in a new tab)

  14. Efeito de padrões de escoamento sobre o particionamento de biomoléculas (proteína e ampicilina) em sistemas aquosos bifásicos (SABs) empregando microsistemas

    … (PEG 1500, PEG 4000 and PEG 6000) and silicone minichannels with circular geometry positioned in a senoidal form and with a 1.8 mm diameter. As expected, the gradual increase of the liquid flow allowed to reach the following flow patterns in sequence: slug flow, droplet flow and parallel flow. …

    brazil-ufrn Repository record for Efeito de padrões de escoamento sobre o particionamento de biomoléculas (proteína e ampicilina) em sistemas aquosos bifásicos (SABs) empregando microsistemas (opens in a new tab)

  15. AIR-COOLED HEAT SINK FOR AN ELECTRICPROPUSION AIRCRAFT APPLICATION BASED ON THE MANIFOLD-MINICHANNEL CONCEPT

    … the redundancy provided by thousands of parallel minichannels, in contrast to conventional straight-fin heat sinks that would experience rapid global clogging. Overall, this work demonstrates that cylindrical air-cooled MMHS systems can deliver high thermal performance, low hydraulic losses, and …

    maryland Repository record for AIR-COOLED HEAT SINK FOR AN ELECTRICPROPUSION AIRCRAFT APPLICATION BASED ON THE MANIFOLD-MINICHANNEL CONCEPT (opens in a new tab)

  16. Friction stir channeling: an innovative technique for heat exchanger manufacturing

    "Friction stir processing (FSP) is an emerging processing technique based on the principles of friction stir welding (FSW), which is a relatively new solid-state metal joining process developed by The Welding Institute, UK. Some of the unique features of FSW such as the low amount of heat …

    must-thes Repository record for Friction stir channeling: an innovative technique for heat exchanger manufacturing (opens in a new tab)

  17. Experimental Evaluation of an Additively Manufactured Straight Mini-Channel Heat Sink for Electronics Cooling

    The continuous miniaturization of electronic devices and the corresponding increase in computing powers have led to a significant growth in the density of heat dissipation within these devices. This increase in heat generation has challenged conventional air fan cooling and alternative solutions …

    vt Repository record for Experimental Evaluation of an Additively Manufactured Straight Mini-Channel Heat Sink for Electronics Cooling (opens in a new tab)

  18. Supercritical Gas Cooling and Near-Critical-Pressure Condensation of Refrigerant Blends in Microchannels

    A study of heat transfer and pressure drop in zero ozone-depletion-potential (ODP) ‎refrigerant blends in small diameter tubes was conducted. The azeotropic refrigerant ‎blend R410A (equal parts of R32 and R125 by mass) has zero ODP and has properties ‎similar to R22, and is therefore of interest …

    gatech Repository record for Supercritical Gas Cooling and Near-Critical-Pressure Condensation of Refrigerant Blends in Microchannels (opens in a new tab)