Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 26 for “"Minimum Drag"”.
-
Ram Air-Turbine of Minimum Drag
… was to predict the conditions that would yield minimum drag for a small Ram-Air Turbine used to provide a specified power requirement for a small flight test instrument called the Boundary Layer Data System. Actuator Disk Theory was used to provide an analytical model for this work. Classic …
-
Prediction and experimental evaluation of planar wing spanloads for minimum drag
… were conducted to evaluate the changes in drag as the design constraints differed. The results indicate that an optimized spanload having equal lift and wing-root bending moment to that of an elliptically-loaded wing can experience significant decreases in drag. Comparisons between the …
-
Drag considerations for flight in atmospheric turbulence
… determine the combination that would produce the minimum drag for a given lift. Further, the center of gravity (CG) position which gives the desired lift distribution and at the same time, maintains aircraft trim is determined. Furthermore, a classic set of non-linear equations of motion for …
-
Analysis and Optimization of Unsteady Flow Past a Circular Cylinder Using a Harmonic Balance Method
… of a rotating cylinder for lift enhancement, drag reduction, and the suppression of vortex shedding. The governing coupled nonlinear Navier-Stokes equations were solved using a finite difference discretization and Newton’s method. In this way, three flow solvers were developed for this …
-
Efficient inverse methods for supersonic and hypersonic body design, with low wave drag analysis
… of target pressure distributions, a study of minimum drag body shapes was conducted over a Mach number range from 3 to 12. Numerical results show that the power law bodies result in low drag shapes, where the n=.69 (l/d = 3) or n=.70 (l/d = 5) shapes have lower drag than the previous …
-
Oscillating flow about circular cylinders at low Keulegan-Carpenter numbers.
The in-line force and the resulting drag and inertia coefficients for smooth and rough circular cylinders immersed in a sinusoidally oscillating flow at low Keulegan-Carpenter numbers (K) have been determined experimentally and compared with those obtained theoretically by Stokes and Wang. In …
-
A simulator study of the horizontal landing characteristics and piloting techniques for manned re-entry gliders
… of proposed vehicles with maximum lift to drag ratios of 3 to 5. The problem was Investigated from final approach to touchdown, In still and turbulent air, simulating longitudinal equations of motion only. A three phase landing consisting of a steady glide final approach, a nearly constant …
-
Design optimization of aerodynamic drag at the rear of generic passenger cars using nurbs representation
… were performed on these geometries to obtain drag coefficients. Once the results of CFD simulations were available, a response surface model was constructed using linear regression technique. Finally, the design exploration was performed using the response surface model instead of actual CFD …
-
Multi-Fidelity Predictions for Control Allocation on the NASA Ikhana Research Aircraft to Minimize Drag
… scheduling) can be used by aircraft to minimize drag at various operating conditions during flight. In this work, camber schedules for minimum drag on the NASA Ikhana are obtained over a range of lift coefficients. A modern numerical lifting-line algorithm is used to predict the lift and drag of …
-
Analyzing Hydrodynamic Properties of the North Atlantic Right Whales with Computer Solutions
<p>Animals experience hydrodynamic forces (lift, drag, and side) and moments (pitching, yawing, and rolling) as a result of motion in an aqueous medium. Under selective pressure, most cetaceans, including porpoises, dolphins, and whales, developed a streamlined body shape and modified limbs, which …
-
Computational analysis of planar wings designed for optimum span-load
… Computational results indicated different drag characteristics between the three span-load optimized wings at the design CL. The Viscous Optimized Wing produced the minimum drag while the Elliptic Wing produced the largest drag at design CL. The Inviscid Optimized Wing had the largest …
-
Real-time Aerodynamic Modeling and Control of Optimum Power-Off Glide Performance During Emergency Forced Landings
… by creating a Kalman filter-based real-time drag model. This research utilizes theoretical modeling, system identification, and T-38 flight-test data. The framework implements a three-variable drag model, which enables real-time estimation of glide range, best-glide speed, and trajectory …
-
Aerostructural Shape and Topology Optimization of Aircraft Wings
… adjoint method. The wing is optimized for minimum drag subject to a compliance constraint taken from a 2g maneuver condition. The results from the MDO algorithm are compared with those of a sequential optimization procedure in order to quantify the benefits of the MDO approach. While the …
-
Aircraft conceptual design study of the canard and three-surface unconventional configurations for the purposes of reducing environmental impacts
… configuration is recognized to have lower trim drag and the capability to fly at minimum drag for all CGs. For this reason, it’s worth continuing the work started in this project to see if a three-surface high-speed jet aircraft could eventually be more efficient.
-
Shape optimization using feature-based CAD systems and adjoint methods
… for certain objective functions (for e.g. minimum pressure loss, minimum drag, maximum lift etc.). In this thesis, an automated optimization process is presented, which uses the parameters defining the features in a feature-based CAD model as design variables. This process exploits adjoint …
-
Data-Efficient Machine Learning-Enabled Aerodynamic Optimization of Blades
… wide range of operating conditions, achieving a minimum drag error of 0.44 drag counts while evaluating a full polar, seven orders of magnitude faster than the CFD. A systematic study on the airfoil parameterization technique is also performed. The airfoil inverse design problem is addressed …
-
CLOSED-LOOP ADAPTIVE MODEL PREDICTIVE CONTROL OF A BLUFF BODY WAKE AND ANALYSIS OF MECHANISMS LEADING TO OPTIMAL SYSTEM STATES
… after perturbation; and minimization of drag or wake fluctuation intensity. An adaptive learning strategy is implemented to adjust the model to new Reynolds number ($Re$) conditions without user intervention, thereby extending the controller performance and achieving more robust control. …
-
Research in Profiling and Development of a New Screw Rotor Profile
… in mechanical engineering. The understanding of drag losses in screw machines was adopted to adjust profiles to have minimum drag losses. It is experimentally demonstrated to lead to substantial improvements in the overall energy efficiency of oil-injected screw compressors. The combined homotopy …
-
Optimum Spanloads Incorporating Wing Structural Considerations And Formation Flying
The classic minimum induced drag spanload is not necessarily the best choice for an aircraft. For a single aircraft configuration, variations from the elliptic, minimum drag optimum load distribution can produce wing weight savings that result in airplane performance benefits. For a group of …
Page 1 of 2