Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 63 for “"Minimum Feature Size"”.

  1. Minimum Feature Size in Proper Triangulations

    … are much smaller than those in the input. The minimum feature size of a crossing-free geometric graph is the smallest distance between a vertex and a nonincident edge. This measure applies to both a polygon and its triangulations, and the ratio of the input minimum feature size to that of the …

    ottawa-retro Repository record for Minimum Feature Size in Proper Triangulations (opens in a new tab)

  2. Development of a Process for Determining Minimum Feature Size in Additive Manufacturing with Applications to Topology Optimization

    … highly complex geometries. In this work, “minimum feature size”, defined as the smallest scale at which a feature of a particular shape in a particular orientation can be manufactured, is examined in detail. A parameterization for shape and orientation of small features is developed, and an …

    washington Repository record for Development of a Process for Determining Minimum Feature Size in Additive Manufacturing with Applications to Topology Optimization (opens in a new tab)

  3. Topology Optimization of Passively Cooled Heatsinks for High Efficiency Electronics

    … of the reference designs with equivalent minimum feature size by 14% for thermal compliance with a 67% reduction in volume. When considering a reference design that does not meet the minimum feature size, the optimization results proved to lower the thermal compliance by 7% with a 48% …

    carleton Repository record for Topology Optimization of Passively Cooled Heatsinks for High Efficiency Electronics (opens in a new tab)

  4. Simulation and characterization of nanoparticle thermal conductivity for a microscale selective laser sintering system

    … (AM) technologies are often restricted by the minimum feature size of parts they can repeatably build. The microscale selective laser sintering (μ-SLS) process, which is capable of producing single micron resolution parts, addresses this issue directly. However, the unwanted dissipation of heat …

    texas Repository record for Simulation and characterization of nanoparticle thermal conductivity for a microscale selective laser sintering system (opens in a new tab)

  5. Design and Fabrication of a Mask Projection Microstereolithography System for the Characterization and Processing of Novel Photopolymer Resins

    … a benchmark test part, designed to determine the minimum feature size, XY plane accuracy, Z-axis minimum feature size, and Z-axis accuracy of each photopolymer with the system. The first characterized photopolymer was poly (propylene glycol) diacrylate, which was used to benchmark the designed …

    vt Repository record for Design and Fabrication of a Mask Projection Microstereolithography System for the Characterization and Processing of Novel Photopolymer Resins (opens in a new tab)

  6. Modeling simulation and design guidelines for EOS/ESD protection circuits in CMOS technologies

    … The susceptibility to EOS/ESD increases as the minimum feature size in ICs is reduced. In order to protect the internal circuitry from EOS/ESD, various on-chip protection schemes have been proposed and are being used in commercial ICs.

    uiuc Repository record for Modeling simulation and design guidelines for EOS/ESD protection circuits in CMOS technologies (opens in a new tab)

  7. Transistor sizing in the design of high-speed CMOS super buffers

    … the mask level hardware design of a three micron minimum feature size p well high-speed super buffer. A software representation of the super buffer can be used for the automated design of custom Very-Large-Scale Integrated (VLSI) circuits. Keywords: MacPITTS; Silicon compiler; CMOS; VLSI; Super …

    nps Repository record for Transistor sizing in the design of high-speed CMOS super buffers (opens in a new tab)

  8. Development of in-situ techniques for predicting PEB temperature

    The minimum feature size that can be fabricated depends on the post-exposure bake (PEB) temperature because chemically amplified resist, used by DUV lithography, is very temperature sensitive. This thesis aims at developing techniques for improving temperature measurement accuracy so that better …

    nus Repository record for Development of in-situ techniques for predicting PEB temperature (opens in a new tab) Download file for Development of in-situ techniques for predicting PEB temperature (opens in a new tab)

  9. Design of a digital signal processing system on chip for an eddy current probe

    … Law promotes continuation of the decrease in minimum feature size and wafer size increase as the bases for the semiconductor industry's successful future. This continuation of the decrease in minimum feature size and increase in wafer size has a number of important implications. One such …

    iastate Repository record for Design of a digital signal processing system on chip for an eddy current probe (opens in a new tab)

  10. Theoretical investigations of thermoelectric effects in advanced low dimensional materials

    For the continued realization of scaling down in minimum feature size according to Moore?s law, nanostructure devices have attracted growing attentions due to higher capability and integration. At the nanoscale, quantum confinement effects can be observed, and the conventional theory is no longer …

    nus Repository record for Theoretical investigations of thermoelectric effects in advanced low dimensional materials (opens in a new tab) Download file for Theoretical investigations of thermoelectric effects in advanced low dimensional materials (opens in a new tab)

  11. Modeling, Simulation and Fabrication of 100 nm (Leff) High Performance CMOS Transistors

    … short channel effects, double exposure to obtain minimum feature size, anisotropic polysilicon and nitride spacers etch, high dose source drain extension implants to minimize the contribution of parasitic resistance to ON state performance of the device, high dose source drain implants followed by …

    rit Repository record for Modeling, Simulation and Fabrication of 100 nm (Leff) High Performance CMOS Transistors (opens in a new tab)

  12. Reliability Analysis In Complex Microprocessors

    … functions. The trend has been to scale down the minimum feature size of ICs to enable larger scale integration with higher device density, faster clock speeds and more complex functions. Fabrication technology for ICs is also being constantly updated to match the requirements for complex …

    ttu Repository record for Reliability Analysis In Complex Microprocessors (opens in a new tab)

  13. AUTOMATIC DIE POSITIONING IN THE SEM

    … failure site, either image registration or feature tracking is used to locate the site. To locate failure sites containing unique and distinguishing features, such as those found on logic ICs, an image registration procedure is used. Experiments carried out on a microprocessor and an …

    nus Repository record for AUTOMATIC DIE POSITIONING IN THE SEM (opens in a new tab) Download file for AUTOMATIC DIE POSITIONING IN THE SEM (opens in a new tab)

  14. The Development of Surface Profile Models in Abrasive Slurry Jet Micro-machining of Brittle and Ductile materials

    … fine abrasive particles is used to erode micro-sized features such as holes and channels in a variety of brittle and ductile materials with a high degree of accuracy and repeatability without the need for a patterned mask. ASJM causes no tool wear and thermal damage, applies small forces on the …

    toronto-retro Repository record for The Development of Surface Profile Models in Abrasive Slurry Jet Micro-machining of Brittle and Ductile materials (opens in a new tab)

  15. Solution Processing of Stripes, Patches, and Digital Patterns Using a Novel Slot Die Coating-inspired Approach

    … on the print resolution, with typical feature sizes ranging from millimeters to microns. Although feature sizes across this range are technically feasible with established techniques, processing at commercial scale has emerged as a persistent modern challenge. To address this challenge, …

    gatech Repository record for Solution Processing of Stripes, Patches, and Digital Patterns Using a Novel Slot Die Coating-inspired Approach (opens in a new tab)

  16. A Fault-Tolerant Alternative to Lockstep Triple Modular Redundancy

    … to reduce defects within their processes. As the minimum feature size get smaller, defects become increasingly difficult to prevent. Defects can change the behavior of a logic circuit resulting in a fault. Manufacturers and designers may improve yield, reliability, and profitability by using …

    portland-state Repository record for A Fault-Tolerant Alternative to Lockstep Triple Modular Redundancy (opens in a new tab)

  17. Chemical Vapor Deposition of Hafnium Oxynitride Films Using Different Oxidants

    As the minimum feature size in complementary metal-oxide-semiconductor (CMOS) devices shrinks, the leakage current through the gate insulator (silicon oxide) will increase sufficiently to impair device operation. A high dielectric constant (k) insulator is needed as a replacement for silicon oxide …

    gatech Repository record for Chemical Vapor Deposition of Hafnium Oxynitride Films Using Different Oxidants (opens in a new tab)

  18. A preliminary formalization of scale in topology optimization

    Topology Optimization often enforces a minimum feature size, also known as a scale, to avoid instability and inaccuracy in the optimized result. This is usually done by applying a discretized convolution kernel on either the density or the sensitivity values. It is not well-established, however, …

    uiuc Repository record for A preliminary formalization of scale in topology optimization (opens in a new tab)

  19. Technology-independent CMOS op amp in minimum channel length

    … Moreover, in the case of digital circuits, minimum feature-size (short channel length) devices can be used for better performance, but analog circuits are still being designed using channel lengths larger than the minimum feature sizes. The research in this thesis is aimed at understanding …

    gatech Repository record for Technology-independent CMOS op amp in minimum channel length (opens in a new tab)

  20. A cost quality model for CMOS IC design

    With a decreasing minimum feature size in very large scale integration (VLSI) complementary metal oxide semiconductor (CMOS) technology, the number of transistors that can be integrated on a single chip is increasing rapidly. Ensuring that these extremely dense chips are almost free of defects, and …

    vt Repository record for A cost quality model for CMOS IC design (opens in a new tab)

Page 1 of 4