Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 45 for “"Minimum Miscibility Pressure"”.

  1. Advances in calculation of minimum miscibility pressure

    Minimum miscibility pressure (MMP) is a key parameter in the design of gas flooding. There are experimental and computational methods to determine MMP. Computational methods are fast and convenient alternatives to otherwise slow and expensive experimental procedures. This research focuses on the …

    texas Repository record for Advances in calculation of minimum miscibility pressure (opens in a new tab)

  2. Correlation for carbon dioxide minimum miscibility pressure, A

    Includes bibliographical references.

    colo-mines Repository record for Correlation for carbon dioxide minimum miscibility pressure, A (opens in a new tab)

  3. CO2 Minimum Miscibility Pressure and Recovery Mechanisms in Heterogeneous Low Permeability Reservoirs

    … the phase behavior is altered by high capillary pressure owing to the nanoscale pore throats of shale rocks and it may also influence minimum miscibility pressure (MMP), which is an important parameter controlling gas floods for CO2 injection EOR. To investigate this influence, flash calculation …

    vt Repository record for CO2 Minimum Miscibility Pressure and Recovery Mechanisms in Heterogeneous Low Permeability Reservoirs (opens in a new tab)

  4. A simulation study of the effect of injecting carbon dioxide with nitrogen or lean gas on the minimum miscibility pressure

    … as carbon dioxide, nitrogen, and lean gas. The minimum miscibility pressure of the carbon dioxide is low compared to the other injection gases. Moreover, carbon dioxide injection reduces its concentration in the atmosphere, which makes it environmental solution. However, capturing and storing …

    ttu Repository record for A simulation study of the effect of injecting carbon dioxide with nitrogen or lean gas on the minimum miscibility pressure (opens in a new tab)

  5. Evaluation of Minimum Miscibility Pressure and Effective Diffusion Coefficients for Design of Gas Assisted Recovery in Unconventional Liquid-Rich Shale Reservoirs

    … is coupled with the Young-Laplace capillary pressure model to include the nanopore confinement effect into the fluid behavior model. The study’s general objective is to predict the performances of different gas-assisted EOR methods in unconventional liquid-rich reservoirs with a more …

    tamu Repository record for Evaluation of Minimum Miscibility Pressure and Effective Diffusion Coefficients for Design of Gas Assisted Recovery in Unconventional Liquid-Rich Shale Reservoirs (opens in a new tab)

  6. A Reliable and Rapid Technique for the Laboratory Determination of the Minimum Miscibility Pressure for CO2 – Light Crude Oil Systems Using the Slim Tube Method

    Minimum miscibility pressure is a crucial parameter for the design of any gas injection project. The techniques used for MMP determination can be categorized into either experimental or computational methods. Computational methods are convenient and fast. However, they do not lead to accurate …

    tamu Repository record for A Reliable and Rapid Technique for the Laboratory Determination of the Minimum Miscibility Pressure for CO2 – Light Crude Oil Systems Using the Slim Tube Method (opens in a new tab)

  7. Improved Fluid Characterization for Miscible Gas Floods

    … important displacement parameters such as the minimum miscibility pressure or enrichment (MMP or MME) or the likely compositions that result in a reservoir from condensing-vaporizing displacements.

    texas Repository record for Improved Fluid Characterization for Miscible Gas Floods (opens in a new tab)

  8. Low Interfacial Tension Foam Miscible Ethane Oil Recovery in Low Permeability Harsh Environments

    … dissolved solids with divalent ions, 74°C). Minimum miscibility pressure displacement tests were performed for dead crude oil from the Wolfcamp Spraberry trend area using ethane and carbon dioxide, showing a lower MMP for ethane. A surfactant formulation capable of persistent foams in the …

    houston Repository record for Low Interfacial Tension Foam Miscible Ethane Oil Recovery in Low Permeability Harsh Environments (opens in a new tab)

  9. Microfluidic and Micro-core Methods for Enhanced Oil Recovery and Carbon Storage Applications

    … approach is developed to quantify the minimum miscibility pressure (MMP) - a critical parameter for combined CO2 storage and enhanced oil recovery. The method leverages the inherent fluorescence of crude oils, is faster than conventional technologies, and provides quantitative, …

    toronto-retro Repository record for Microfluidic and Micro-core Methods for Enhanced Oil Recovery and Carbon Storage Applications (opens in a new tab)

  10. A Comparison of Three Equation of State Compositional Simulators

    … contact miscible and immiscible gas drives, a minimum miscibility pressure determination, and a carbon dioxide flood in a half of a five-spot pattern.

    texas Repository record for A Comparison of Three Equation of State Compositional Simulators (opens in a new tab)

  11. Mechanisms of Oil Recovery During Cyclic CO2 Injection process: Impact of Fluid Interactions, operating parameters, and Porous Medium

    … operating parameters, including operating pressure, solvent (CO2) injection time, soaking period, water saturation, etc., affect the performance of this process. However, the number of studies that consider these parameters is relatively limited. In this study, the performance of cyclic CO2 …

    regina Repository record for Mechanisms of Oil Recovery During Cyclic CO2 Injection process: Impact of Fluid Interactions, operating parameters, and Porous Medium (opens in a new tab) Download PDF for Mechanisms of Oil Recovery During Cyclic CO2 Injection process: Impact of Fluid Interactions, operating parameters, and Porous Medium (opens in a new tab)

  12. Rich gas injection pilot: an enhanced oil recovery approach applied to an unconventional reservoir in the Bakken petroleum system

    … hydrocarbon gases. Ethane, like CO2, has a low minimum miscibility pressure, has good solubility in oil, is better at mobilizing higher molecular weight hydrocarbons, and is a good viscosity reducer. The purpose of this study is to determine the technological and economic factors that could …

    colo-mines Repository record for Rich gas injection pilot: an enhanced oil recovery approach applied to an unconventional reservoir in the Bakken petroleum system (opens in a new tab)

  13. A derivative-less approach for generating phase envelope and applications to equations of state

    … a slim-tube experiment to calculate the Minimum Miscibility Pressure (MMP) using the Metcalfe et al. (1978) procedure. The results from computer modeling are then compared with the results from an experimental study performed by Amao (2011). The results match closely, demonstrating the …

    ttu Repository record for A derivative-less approach for generating phase envelope and applications to equations of state (opens in a new tab)

  14. SIMULATION OF THE CARBON DIOXIDE DISPLACEMENT PROCESS

    … the evaluation of a CO2 flooding process is the minimum miscibility pressure. This parameter has been determined by phase behavior experiments, as well as by slim tube or core displacements. Therefore the numerical simulation of these phenomena has become an important task. An existing simulator …

    ku Repository record for SIMULATION OF THE CARBON DIOXIDE DISPLACEMENT PROCESS (opens in a new tab)

  15. Investigation Of Gas Injection EOR In Conventional And Unconventional Reservoirs Based On Laboratory Experiments And Field Pilot Tests

    … strongly oil-wet. Interfacial tension (IFT) and minimum miscibility pressure (MMP) measurements illustrate the interactions between oil, water, and CO2. Results show that there is a strong IFT between oil and water regardless of reservoir pressure while CO2 can reduce the IFT effectively. Core …

    nodak Repository record for Investigation Of Gas Injection EOR In Conventional And Unconventional Reservoirs Based On Laboratory Experiments And Field Pilot Tests (opens in a new tab)

  16. Application of miscibility calculations to gas floods

    … from gas injection is highly dependent on the minimum miscibility pressure (MMP) or minimum miscibility enrichment (MME). The values for these design parameters depend in turn on the displacement mechanisms, vaporizing, condensing, or a combination of the two known as a condensing/vaporizing …

    texas Repository record for Application of miscibility calculations to gas floods (opens in a new tab)

  17. Phase behavior studies of three major unconventional oil reservoirs for produced gas injection

    … fluid characterization and the bubble point pressure analysis for reservoir fluids are performed. A comprehensive phase behavior analysis is then conducted to determine the number of separator stages and the optimum produced gas composition. A series of separator tests, minimum miscibility …

    ttu Repository record for Phase behavior studies of three major unconventional oil reservoirs for produced gas injection (opens in a new tab)

  18. Evaluation of Compositional Effects on Gas-Oil Miscibility and Gas-Assisted Gravity Drainage (GAGD) EOR Process

    … (VIT), offers fast and accurate determination of minimum miscibility pressure (MMP) between the reservoir crude oil and the various gases injected for enhancing oil recovery (EOR). The technique is based on miscibility being the condition where an interface between the injected fluid and the …

    lsu-thes Repository record for Evaluation of Compositional Effects on Gas-Oil Miscibility and Gas-Assisted Gravity Drainage (GAGD) EOR Process (opens in a new tab)

Page 1 of 3